Environmental quality assessment studies of coal handling on peripheral land near Kanika siding, Basundhra-Garjanbahal area of MCL, Sundergarh, Orissa, India

Coal has been recognized as the most important source of energy generation in India. The present work was undertaken in order to assess the environmental impact of coal handling on peripheral land under near Kanika siding, Orissa, India. The data on suspended particulates in ambient air indicates an additional load of 50.5–108.7 μg/m³) to the ambient air due to coal loading which is equivalent to 50 × 365 to 108 × 365 kg/year. However, in the southern side (opposite to siding) covering the crop fields, the dust accumulation was maximum, i.e., 0.021 to 0.035 mg/cm² area in comparison to 0.001 to 0.021 in the eastern side and 0.001 to 0.029 in western side of the crop fields. The physical and chemical properties of soil was also assessed. The results reveal that the coal loading has definite negative impact on the peripheral land near the site.     

Measuring agricultural sustainability in terms of efficiency: the case of Dutch sugar beet growers

Sustainability embraces socio-economic and bio-ecological dimensions or attributes. This paper presents a conceptual framework for quantifying sustainability on the basis of efficiency theory commonly used in economics. The conceptual model is implemented using Data Envelopment Analysis (DEA). Sustainability is measured for a sample of Dutch sugar beet growers. The average technical efficiency was only 50%. A positive correlation was found between technical efficiency and sustainable efficiency. Differences in efficiency among farmers were persistent within and between years. We conclude that there is considerable scope for improving the sustainability of arable farming by better management.     

Monitoring and assessing variation of sewage quality and microbial functional groups in a trunk sewer line

In this study, the variation of sewage quality was investigated and the active fraction of different microbial functional groups in biofilm was quantified in a 5.6-km trunk sewer line. The sewage quality including suspended solids, biochemical oxygen demand, total chemical oxygen demand (COD), total nitrogen, total Kjeldahl nitrogen, ammonia nitrogen, nitrite nitrogen, and nitrate nitrogen were measured and compared with the values in literatures. The results indicated that since the wastewater treatment plant was not operated at its full capacity, the concentrations of different compounds were lower compared with the values in literatures. The values of heterotrophic growth rate constant lay between 5.6 and 8.6 day^???1. Its average value was 7.7 day^???1. The values of heterotrophic lysis rate constant lay between 0.2 and 0.4 day^???1. The active heterotrophic biomass in biofilm varied from 240 to 800 mg COD m^???2 and average value was 497 mg COD m^???2. The biofilm mass varied from 880 to 1,080 mg m^???2. The percentage of heterotroph to biofilm mass fall within the range of 24.0–90.9% and average value was 52.9%. In the oxygen uptake rate batch tests, the biomass, growth rate constant, and lysis rate constant of autotroph could not be determined because the fraction of autotroph in biofilm was relatively few. It revealed that the degradation of organic matters, nitrification, and denitrification occurred in the trunk sewer line. But the results indicate that the condition seem favorable for nitrification.     

NABat: A top-down,bottom-up solution to collaborative continental-scale monitoring

Collaborative monitoring over broad scales and levels of ecological organization can inform conservation efforts necessary to address the contemporary biodiversity crisis. An important challenge to collaborative monitoring is motivating local engagement with enough buy-in from stakeholders while providing adequate top-down direction for scientific rigor, quality control, and coordination. Collaborative monitoring must reconcile this inherent tension between top-down control and bottom-up engagement. Highly mobile and cryptic taxa, such as bats, present a particularly acute challenge. Given their scale of movement, complex life histories, and rapidly expanding threats, understanding population trends of bats requires coordinated broad-scale collaborative monitoring. The North American Bat Monitoring Program (NABat) reconciles top-down, bottom-up tension with a hierarchical master sample survey design, integrated data analysis, dynamic data curation, regional monitoring hubs, and knowledge delivery through web-based infrastructure. NABat supports collaborative monitoring across spatial and organizational scales and the full annual lifecycle of bats.     

Contribution of residential wood combustion to PM10 levels in Portugal

Wood is commonly used in residential combustion for heating purposes; however, it can be a major source of air pollutants, namely fine particles, volatile organic compounds and carbon monoxide. Since 2004, the PM10 daily limit value has been surpassed in Portugal, and the European Commission has stated that plans and programs must be designed in order to reduce these levels. In Portugal, 18% of PM10 emissions are due to residential wood combustion, which may deeply impact the PM10 levels in the atmosphere. The main aim of this study is to investigate the impact of residential wood combustion on the air quality in Portugal. The air quality modelling system MM5/CHIMERE was applied over Portugal for a winter month, for the following three scenarios: the reference scenario, considering the actual emissions of PM10; scenario 1, where residential wood combustion emissions are not considered; and scenario 2, which takes into account a complete conversion from traditional fireplaces to certified appliances (with a 90% reduction in PM emissions). The residential wood combustion contribution to PM10 air quality concentration values during January 2007 ranges from 0 to 14 μg m^?3, with a mean contribution of 10 μg m^?3 in the Lisboa area and 6 μg m^?3 in the Porto region. Concerning the legislated values, the area where the daily average limit value (50 μg m^?3) is exceeded decreases by 46% in the simulation when residential combustion is not considered. The modelling results for scenario 2 are not significantly different from those for scenario 1. In summary, the regulation of the residential wood combustion sector is as an effective way to reduce the PM10 levels in the atmosphere as regards air quality plans and programs.     

Sulfate and Nitrate in Total Suspended Participate in Ontario

In order to make the information in the Federal Register more easily accessible, a summary has been prepared of Federal standards of performance for new stationary sources of air pollution. The standards of performance promulgated by the Environmental Protection Agency in the period from December 1971 through June 1979 are presented in tabular form.     

Screening Capsicum chinense fruits for heavy metals bioaccumulation

Elevated concentrations of heavy metals in edible plants could expose consumers to excessive levels of potentially hazardous chemicals. Sixty-three accessions (genotypes) of Capsicum chinense Jacq, collected from 8 countries of origin were grown in a silty-loam soil under field conditions. At maturity, fruits were collected and analyzed for seven heavy metals (Cd, Cr, Ni, Pb, Zn, Cu, and Mo) concentrations. The main objectives of this investigation were: 1) to determine the concentrations of seven heavy metals in the soil and monitor their accumulation in mature fruits, 2) to categorize the pepper accessions as low or high heavy metal accumulators, and 3) to determine if heavy metal content of the pepper fruit was lower than the permitted limits. Concentrations and relative proportions of heavy metals in pepper fruits of C. chinense varied among accessions. Fruits of Plant Introduction (PI) 355820 accumulated significant concentrations of Cd (0.47 μ g g^?1dry fruit). PI-260522 accumulated the highest concentration of Pb (2.12 μ g g^?1 dry fruit) among the 63 accessions tested. This accession (PI-260522) contained about twice the Pb limit on a fresh weight basis. Among the 63 accessions analyzed, PI-238051 contained the highest levels of Ni (17.2 μ g g^?1). We concluded that high accumulator genotypes may be useful for phytoremediation, while, low accumulator accessions might be appropriate selections for growing on Cd-, Pb-, or Ni-contaminated soils to prevent potential human exposure to heavy metals and health hazards through the food chain.     

Assessment of contamination by heavy metals and petroleum hydrocarbons in sediments of Montevideo Harbour (Uruguay)

As part of the first environmental assessment within Montevideo Harbour, in summer and winter of 1998, sediments samples were collected at eight locations to determine the spatial distribution of anthropogenic pollutants. Muddy sediments with high organic matter content dominate the study area. Heavy metal levels indicated that sediments were highly polluted with Zn (overall mean: 312+/-102 microg g(-1) dry sediment), Pb (85+/-31), Cu (89+/-25), Cr (162+/-62), and Hg (0.63+/-0.3) and moderately with Ni (30+/-2) and Ag (1.2+/-0.4). Depending on location and season, aliphatic hydrocarbons reached from 21 to 120 microg g(-1), while the unresolved complex mixture represented up to 76% of the total aliphatic fraction. Total PAH concentrations ranged from 1.56 to 90.44 microg g(-1); except at one location, petroleum derivatives were identified as main local source. The results pointed out that almost all the harbour area presented some substances that can cause adverse biological effects, especially in the inner region where all metals are above PEL levels. Principal components analysis confirmed that the inner harbour region is most severely affected by the pollutants and it was possible to differentiate three regions according to their environmental quality.     

Cu(II)-Glyphosate system: A study by anodic stripping voltammetry and the influence on Cu adsorption by montmorillonite

The influence of the pesticide glyphosate (GPS) on the adsorption of Cu (II) on montmorillonite has been examined. The complexation of Cu(II) with GPS was studied using anodic stripping voltammetry in differential pulse mode (DPASV). It has been concluded that the complexes present a labile behaviour and GPS shows a low but noticeable degree of heterogeneity, probably due to complexation of Cu bv more than one GPS species. Cu(II) adsorption on montmorillonite is drastically decreased in the presence of GPS, due to several reasons: decrease in free Cu concentration due to formation of Cu-GPS complexes; surface loading of GPS on montmorillonite, obstructing interlamellar Cu²⁺ adsorption and competitive effect between protons and Cu²⁺ for interlamellar positions.