The possible association between selected sediment characteristics and the occurrence of benthic macroinvertebrates in a minimally affected river in South Africa

Forty-two families of which the vast majority associated with particles >2000?µm were found. Sediment particle sizes <2000?µm had a detrimental effect on biodiversity. The highest biodiversity was recorded at sites characterised by riffle and run habitats. Although relatively high concentrations of selected metals were present in the sediment, it was largely from geological origin and most probably not bioavailable. No significant correlation was demonstrated between variation in temperature, pH, and electrical conductivity and diversity and abundance of macroinvertebrates. Therefore, it can be concluded that, under these conditions, sediment particle size and biotope availability played a decisive role on the distribution and abundance of macroinvertebrate taxa.     

Genotoxicity assessment of human peripheral Lymphocytes induced by thallium(I) and thallium(III)

Thallium is a non-essential metal with a wide range of industrial uses. However, thallium is also a potential pollutant with high potential toxicity to humans. In the present study, we analyzed and compared the cellular and genotoxic effects of thallium in two main oxidation states by applying chromosome aberration assays to human peripheral lymphocytes. We observed that thallium(I) sulfate reduced the mitotic index at all tested concentrations (0.5, 1, 5, 50 and 100 μg/mL), whereas thallium(III) chloride was toxic at concentrations ≥1 μg/mL. Thallium(I) and thallium(III) treatment significantly increased structural chromosomal aberrations, with and without gaps, and increased the percentage of aberrant cells without gaps. Furthermore, satellite associations and numerical chromosomal aberration tests showed significant differences at a few of the tested concentrations. The satellite association test is related to aneuploidy. Thallium salts increased satellite associations when hyperploid cells were observed. Our results indicated that the two oxidation states of thallium induced toxicity in vitro – i.e. cyto/genotoxic (clastogenic and aneuploidogenic) effects.     

Infiltrating citizen-driven initiatives for sustainability

To examine how citizen-driven initiatives for sustainability strive to bring about change and spread their practices, efforts to link social movement, grassroots innovation and green-consumption movements theory are built upon. Göteborg’s citizen-driven waste-prevention initiatives, such as food waste recovery, creating common reuse spaces in housing blocks, exchanging used toys and repairing abandoned bicycles, are considered with data from observations, workshops, documents, social media communications and in-depth interviews. Citizen-driven initiatives succeeded in mobilizing material resources, displaying and reframing various rationales, and creating collaborative local networks to develop their waste-prevention practices. These practices infiltrated the municipal administration, matching incipient institutional mandates to minimize waste. By so doing, they bring within mainstream institutions radical rationales that can become activated in the future, contributing to diachronic change.     

Predictive statistical modelling of cadmium content in durum wheat grain based on soil parameters

Regulatory limits on cadmium (Cd) content in food products are tending to become stricter, especially in cereals, which are a major contributor to dietary intake of Cd by humans. This is of particular importance for durum wheat, which accumulates more Cd than bread wheat. The contamination of durum wheat grain by Cd depends not only on the genotype but also to a large extent on soil Cd availability. Assessing the phytoavailability of Cd for durum wheat is thus crucial, and appropriate methods are required. For this purpose, we propose a statistical model to predict Cd accumulation in durum wheat grain based on soil geochemical properties related to Cd availability in French agricultural soils with low Cd contents and neutral to alkaline pH (soils commonly used to grow durum wheat). The best model is based on the concentration of total Cd in the soil solution, the pH of a soil CaCl₂ extract, the cation exchange capacity (CEC), and the content of manganese oxides (Tamm’s extraction) in the soil. The model variables suggest a major influence of cadmium buffering power of the soil and of Cd speciation in solution. The model successfully explains 88% of Cd variability in grains with, generally, below 0.02 mg Cd kg^?1 prediction error in wheat grain. Monte Carlo cross-validation indicated that model accuracy will suffice for the European Community project to reduce the regulatory limit from 0.2 to 0.15 mg Cd kg^?1 grain, but not for the intermediate step at 0.175 mg Cd kg^?1. The model will help farmers assess the risk that the Cd content of their durum wheat grain will exceed regulatory limits, and help food safety authorities test different regulatory thresholds to find a trade-off between food safety and the negative impact a too strict regulation could have on farmers.

     

Evidence of the impacts of the national housing programme on the accessibility of the low‐income population in Rio de Janeiro

The Brazilian shift from a primarily rural to a more urban society has created major challenges that public policies must address. One of the most relevant challenges is deep social exclusion in urban areas, especially in terms of adequate housing and access to urban opportunities (e.g., jobs, housing, and services). In this context, land use and transport planning play a critical role in the sustainable development agenda. The work presented here analyses the accessibility of low‐income dwellings licenced under the Brazilian housing programme to the low‐income population. To evaluate the accessibility of the programme's target population, a case study was conducted in the city of Rio de Janeiro, where 58,000 homes licensed under the programme were analysed using GIS tools in terms of the present public transport network and the location of the homes. The amount of time it takes to access public transport on foot and the homes’ locations in relation to major urban opportunities were also analysed. Finally, the same analysis was performed for the future transport network, and the results of the two analyses were compared to identify the scope of the legacy generated by investments in preparation for the 2016 network.     

Long-term effects of lead poisoning on bone mineralization in vultures exposed to ammunition sources

Long-lived species are particularly susceptible to bioaccumulation of lead in bone tissues. In this paper we gain insights into the sublethal effects of lead contamination on Egyptian vultures (Neophron percnopterus). Our approach was done on the comparison of two populations (Canary Islands and Iberian Peninsula) differing in exposures to the ingestion of lead ammunition. Blood lead levels were higher in the island population (Canary Islands range: 5.10-1780 μg L⁻¹n = 137; Iberian Peninsula range: 5.60-217.30 μg L⁻¹n = 32) showing clear seasonal trends, peaking during the hunting season. Moreover, males were more susceptible to lead accumulation than females. Bone lead concentration increased with age, reflecting a bioaccumulation effect. The bone composition was significatively altered by this contaminant: the mineralization degree decreased as lead concentration levels increased. These results demonstrate the existence of long-term effects of lead poisoning, which may be of importance in the declines of threatened populations of long-lived species exposed to this contaminant.     

Concentrations of PCDD/Fs,PCBs and PBDEs in breast milk of women from Catalonia,Spain: A follow-up study

The concentrations of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polychlorinated biphenyls (PCBs), and polybrominated diphenyl ethers (PBDEs) were determined in breast milk from women living in the vicinity of a new hazardous waste incinerator (HWI) in Catalonia, Spain. The results were compared with the levels obtained in two previous surveys carried out in 1998 (baseline study) and 2002. The current concentrations of PCDD/Fs in breast milk ranged from 45 to 143 pg/g fat (2.8 to 11.2 pg WHO-TEQ/g fat), while total PCBs ranged from 114 to 617 pg/g fat (2.8 to 17.6 pg WHO-TEQ/g fat). PBDE concentrations (sum 15 congeners) ranged from 0.57 ng/g fat to 5.9 ng/g fat, with a mean value of 2.5 ng/g fat. A general decrease of the concentrations for PCDD/Fs and both planar and total PCBs was observed. Regarding to PBDE concentrations in breast milk, similar levels between the 2002 and the present study were noted. The levels of PCDD/Fs and PCBs in milk of women living in urban areas were higher than those corresponding to the industrial zones (38% and 40%, respectively). However, the current PBDE levels were slightly lower (13%) in the urban than in the industrial zone. For PCDD/Fs and PCBs, the current decreases are in accordance with the reduction in the dietary intake of these pollutants found in recent studies carried out in the same area of study.     

Determination of total and available fractions of PAHs by SPME in oily wastewaters: overcoming interference from NAPL and NOM

Background, aim, and scope  

Polycyclic aromatic hydrocarbons (PAHs) are often found in oily wastewaters. Their presence is usually the result of human activities and has a negative effect on the environment. One important step in addressing this problem is to evaluate the effectiveness of PAH removal by biological processes since these are the most cost-effective treatments known today. Many techniques are presently available for PAH determination in wastewaters. Solid phase microextracion (SPME) is known to be one of the most effective techniques for this purpose. When analyzing complex matrices with substances such as natural organic matter (NOM) and non-aqueous phase liquids (NAPL), it is important to differentiate the free dissolved PAH from matrix-bonded PAH. PAHs associated with the bonded fraction are less susceptible to biological treatment. The present study concerns the development of a simple and suitable methodology for the determination of the freely dissolved and the total fraction of PAHs present in oily wastewaters. The methodology was then applied to an oily wastewater from a fuel station retention basin.     

Effect of impeller type and mechanical agitation on the mass transfer and power consumption aspects of ASBR operation treating synthetic wastewater

The effect of flow type and rotor speed was investigated in a round-bottom reactor with 5 L useful volume containing 2.0 L of granular biomass. The reactor treated 2.0 L of synthetic wastewater with a concentration of 800 mgCOD/L in 8-h cycles at 30 degrees C. Five impellers, commonly used in biological processes, have been employed to this end, namely: a turbine and a paddle impeller with six-vertical-flat-blades, a turbine and a paddle impeller with six-45 degrees -inclined-flat-blades and a three-blade-helix impeller. Results showed that altering impeller type and rotor speed did not significantly affect system stability and performance. Average organic matter removal efficiency was about 84% for filtered samples, total volatile acids concentration was below 20 mgHAc/L and bicarbonate alkalinity a little less than 400 mgCaCO3/L for most of the investigated conditions. However, analysis of the first-order kinetic model constants showed that alteration in rotor speed resulted in an increase in the values of the kinetic constants (for instance, from 0.57 h(-1) at 50 rpm to 0.84 h(-1) at 75 rpm when the paddle impeller with six-45 degrees -inclined-flat-blades was used) and that axial flow in mechanically stirred reactors is preferable over radial-flow when the vertical-flat-blade impeller is compared to the inclined-flat-blade impeller (for instance at 75 rpm, from 0.52 h(-1) with the six-flat-blade-paddle impeller to 0.84 h(-1) with the six-45 degrees -inclined-flat-blade-paddle impeller), demonstrating that there is a rotor speed and an impeller type that maximize solid-liquid mass transfer in the reaction medium. Furthermore, power consumption studies in this reduced reactor volume showed that no high power transfer is required to improve mass transfer (less than 0.6 kW/10(3)m3).     

Immobilization of heavy metals in polluted soils by the addition of zeolitic material synthesized from coal fly ash

The use of zeolitic material synthesized from coal fly ash for the immobilization of pollutants in contaminated soils was investigated in experimental plots in the Guadiamar Valley (SW Spain). This area was affected by a pyrite slurry spill in April 1998. Although reclamation activities were completed in a few months, residual pyrite slurry mixed with soil accounted for relatively high leachable levels of trace elements such as Zn, Pb, As, Cu, Sb, Co, Tl and Cd. Phytoremediation strategies were adopted for the final recovery of the polluted soils. The immobilization of metals had previously been undertaken to avoid leaching processes and the consequent groundwater pollution. To this end, 1100 kg of high NaP1 (Na6[(AlO2)6(SiO2)10] .15H2O) zeolitic material was synthesized using fly ash from the Teruel power plant (NE Spain), in a 10 m3 reactor. This zeolitic material was manually applied using different doses (10000-25000 kg per hectare), into the 25 cm topsoil. Another plot (control) was maintained without zeolite. Sampling was carried out 1 and 2 years after the zeolite addition. The results show that the zeolitic material considerably decreases the leaching of Cd, Co, Cu, Ni, and Zn. The sorption of metals in soil clay minerals (illite) proved to be the main cause contributing to the immobilization of these pollutants. This sorption could be a consequence of the rise in pH from 3.3 to 7.6 owing to the alkalinity of the zeolitic material added (caused by traces of free lime in the fly ash, or residual NaOH from synthesis).