Fate and transport of monoterpenes through soils. Part II: calculation of the effect of soil temperature, water saturation and organic carbon content

This theoretical study was performed to investigate the influence of soil temperature, soil water content and soil organic carbon fraction on the mobility of monoterpenes (C10HnOn') applied as pesticides to a top soil layer. This mobility was expressed as the amount volatilized and leached from the contaminated soil layer after a certain amount of time. For this, (slightly modified) published analytical solutions to a one dimensional, homogeneous medium, diffusion/advection/biodegradation mass balance equation were used. The required input-parameters were determined in a preceding study. Because the monoterpenes studied differ widely in the values for their physico-chemical properties, the relative importance of the various determinants also differed widely. Increasing soil water saturation reduced monoterpene vaporization and leaching losses although a modest increase was usually observed at high soil water contents. Organic matter served as the major retention domain, reducing volatilization and leaching losses. Increasing temperature resulted in higher volatilization and leaching losses. Monoterpene mobility was influenced by vertical water flow. Volatilization losses could be reduced by adding a clean soil layer on top of the contaminated soil. Detailed insight into the specific behaviour of different monoterpenes was obtained by discussing intermediate calculation results; the transport retardation factors and effective soil diffusion coefficients. One insight was that the air-water interface compartment is probably not an important partitioning domain for monoterpenes in most circumstances. The results further indicated that biodegradation is an important process for monoterpenes in soil.     

A study of the particulate matter PM10 composition in the atmosphere of Chillán, Chile

Inhalable particulate matter (PM10) concentrations were measured over 24-h intervals at six different urban sites in the city of Chillán from September 2001 to April 2003. Sampling locations were selected to represent central city, commercial, residential, and industrial portions of the city. Chemical composition of PM10 was performed to samples of 47 mm diameter Teflon membranes within the city of Chillán. The spatial and temporal variability of the chemical composition of PM10 was evaluated taking into account additional data from meteorology and further air pollutants. The majority of PM mass was comprised of carbon, nitrate, sulfate, ammonium, and crustal components but in different proportion on different days and at different sites. The chemical analyses showed that carbonaceous substances and crustal material were the most abundant component of PM10 during the winter and summer, respectively. The concentrations of PM10 were higher during the cold season than during the warm season. The PM10 concentrations were higher in the downtown area of the city of Chillán, where also the chemical composition was more variable due to urban traffic and other anthropogenic sources.     

Optimizing microwave-assisted solvent extraction (MASE) of pesticides from soil

Microwave-assisted solvent extraction (MASE) was investigated as an alternative for extraction of parathion (O,O-diethyl O-4-nitrophenyl phosphorothioate), methyl parathion (O,O-dimethyl O-4-nitrophenyl phosphorothioate), p,p'-DDE [1,1'-dichloro-2,2-bis(4-chlorophenyl)ethane], hexachlorobenzene (HCB), simazine (6-chloro-N2,N4-diethyl- 1 ,3,5-triazine-2,4-diamine) and paraquat dichoride (1,1'-dimethyl-4,4'-bipyridinium) from two different soils and from an earthworm-growing substrate. The matrices were fortified with 14C-radiolabeled pesticides and extracted with various solvent systems under different microwave conditions. Recoveries of more than 80% could be obtained depending on the used microwave conditions and solvent, except for paraquat whose recovery was generally less efficient. Thus, MASE can be successfully used to extract pesticides from environmental and biological samples and could be a viable alternative to conventional extraction methods. The technique uses smaller amounts of organic solvents, thereby minimizing the costs of the analysis and the disposal of waste solvent.     

Effect of backyard burning on dioxin deposition and air concentrations

The influence from open burning of garden and household waste on locally measured dioxin deposition and air concentrations was evaluated in three sets of experiments: the combustion of garden waste in barrels and in open fires, and the incineration of household waste in an empty oil drum. Each set was composed of eight individual experiments over 4 h. Deposition gauges were located 20 m NE, SE, SW and NW with respect to the source and on a background location at 400 m SW. Air samples were taken in the plume with a medium volume sampler equipped with a quartz filter and a polyurethane plug. The results illustrate deposition increments in the wind direction at a distance of 20 m from the source of 0.8 pg TEQ/m2 day for garden waste and 2.5 pg TEQ/m2 day for household waste. Concentrations in the plume were increased by 160-580 fg TEQ/m3 over a period of 12 and 31 h respectively. Expressed at a reference CO2 concentration of 9% this corresponds with a range from 0.8 to 3.6 ng TEQ/m3, which is comparable with a poorly controlled MSWI. Emission factors in the order of magnitude of 4.5 ng TEQ/kg combusted garden waste and 35 ng TEQ/kg burned municipal waste were determined.     

Substance flows through the economy and environment of a region

In the tradition of the study of materials flows through society, the Substance Flow Analysis (SFA) method and its software tool SFINX are presented. SFA aims at providing the relevant information for a country’s overall management strategy regarding single substances or coherent groups of substances. Three modelling techniques and their possibilities and limitations are discussed: Bookkeeping, static modelling, and dynamic modelling. The computer program SFINX can be used for varoius purposes: (1) to obtain an overview of stocks and flows of a substance in, out and through a nation’s economy and environment for a specific year, (2) to trace the origins of specific pollution problems, and (3) to estimate the effectiveness of certain abatement measures. Each application has its own requirements with regard to data and modelling.     

Substance flows through the economy and environment of a region

Part I: Abstract  In the tradition of the study of materials flows through society, the Substance Flow Analysis (SFA) method is presented. SFA aims at providing the relevant information for a country’s overall management strategy regarding single substances or coherent groups of substances. This article is dedicated to the presentation of a threestep general framework for SFA-type studies, and elaborates on its first step the systems definition. Attention is given to the definition of the external and internal system boundaries, the categorization of the system’s elements, aspects of materials choice, time, and space, and how these depend on the aim of the conducted study. Moreover, a broader discussion is started on the need for standardization of materials flow studies in general. Part II: Abstract  In the tradition of the study of materials flows through society, the Substance Flow Analysis (SFA) method and its software tool SFINX are presented. SFA aims at providing the relevant information for a country’s overall management strategy regarding single substances or coherent groups of substances. Three modelling techniques and their possibilities and limitations are discussed: Bookkeeping, static modelling, and dynamic modelling. The computer program SFINX can be used for varoius purposes: (1) to obtain an overview of stocks and flows of a substance in, out and through a nation’s economy and environment for a specific year, (2) to trace the origins of specific pollution problems, and (3) to estimate the effectiveness of certain abatement measures. Each application has its own requirements with regard to data and modelling.     

Spatial and seasonal variation in heavy metals in interstitial water of salt marsh soils

The composition of interstitial water collected from a salt marsh in NW Spain showed clear seasonal and spatial variations associated with redox cycles of Fe and S. In the summer, salinity increased in all soils as a consequence of the increase in evapotranspiration. The pH and concentrations of heavy metals also differed with season, but not all environments showed the same variations. Soils not colonized by plants had the highest pH and lowest heavy metal concentrations in the summer. These results support the idea that higher temperatures lead to an increase in the activity of sulfate-reducing bacteria, which in turn leads to an increase in alkalinity and concentration of sulfides in the water. Trace metals tend to precipitate with sulfides under these conditions and are removed from the interstitial water. In contrast, in the soils colonized by Spartina maritima, the oxidation of metal sulfides during the summer led to a decrease in pH and an increase in the metal concentrations in the interstitial water. The results obtained concur with those found for seasonal variations in metal sulfides in soils from the same salt marsh.     

Online hourly determination of 62 VOCs in ambient air: system evaluation and comparison with another two analytical techniques

This paper presents results of the processing and validation of data collected by an automatic gas chromatograph (AGC). This system was used to monitor 62 volatile organic compounds (VOCs) in urban air in the Basque Country, Spain. The nonpolar compounds (C2-C10) identified-paraffins, olefins, aromatics, and chlorinated compounds-accounted for 88% of the mass of total non-methane hydrocarbons (TNMHCs) in ambient air. The evaluation of linearity, precision, detection limits (DLs), and stability of retention times (RTs) indicates that the equipment is suitable for measuring ambient air automatically for prolonged periods (6 months). The calibration of the equipment using response factors calculated on the basis of the effective carbon number (ECN) showed variations of over 10% for acetylene, isoprene, and n-hexane. The results provided by the automatic chromatograph correlated significantly with simultaneous results from other widely used techniques for determining VOCs in ambient air: (1) portable GC, equipped with photoionization detector (PID), and (2) active adsorption on Tenax-TA followed by thermal desorption and chromatographic analysis.     

Use of treated bark for the removal of lipids from water

Raw, biologically treated bark and bark impregnated with transition metal ions were used to retain the lipids from synthetic emulsions. Several experimental parameters affecting the lipid removal efficiency (RE) were studied (initial concentration of lipids, temperature, time, pH, carboxylic acid chain length, etc.). Saturated bark was characterized using Fourier transform infrared (FTIR) spectroscopy and light microscopy, and the treated bark wetting index was determined. Results show that lipid removal can exceed 95% of the initial concentration at a pH lower than 7. The uptake of lipids by these sorbents varied from 0.2 to 2.5 g/g of dry bark. Trials for regenerating the sorbent saturated by lipids allowed the recovery of approximately 95% of lipids. The calorific value of the saturated bark was approximately 79% that of domestic fuel and can be considered as an energy source, thus avoiding its waste disposal. These results may upgrade the treatment of wastewater generated by several industrial sectors, such as the food industry, surface treatment, and so on.