Mixed response in bacterial and biochemical variables to simulated sand mining in placer-rich beach sediments,Ratnagiri, West coast of India

We investigated the influence on bacterial community and biochemical variables through mechanical disturbance of sediment-akin to small-scale mining in Kalbadevi beach, Ratnagiri, a placer-rich beach ecosystem which is a potential mining site. Changes were investigated by comparing three periods, namely phase I before disturbance, phase II just after disturbance, and phase III 24 h after disturbance as the bacterial generation time is ≤7 h. Cores from dune, berm, high-, mid-, and low-tide were examined for changes in distribution of total bacterial abundance, total direct viability (counts under aerobic and anaerobic conditions), culturability and biochemical parameters up to 40 cm depth. Results showed that bacterial abundance decreased by an order from 10⁶ cells g^− 1 sediment, while, viability reduced marginally. Culturability on different-strength nutrient broth increased by 155% during phase II. Changes in sedimentary proteins, carbohydrates, and lipids were marked at berm and dune and masked at other levels by tidal influence. Sedimentary ATP reduced drastically. During phase III, Pearson’s correlation between these variables evolved from non-significant to significant level. Thus, simulated disturbance had a mixed effect on bacterial and biochemical variables of the sediments. It had a negative impact on bacterial abundance, viability and ATP but positive impact on culturability. Viability, culturability, and ATP could act as important indicators reflecting the disturbance in the system at short time intervals. Culturability, which improved by an order, could perhaps be a fraction that contributes to restoration of the system at bacterial level. This baseline information about the potential mining site could help in developing rational approach towards sustainable harnessing of resources with minimum damage to the ecosystem.     

Trace metals biogeochemistry of Kumaun Himalayan Lakes,Uttarakhand, India

The increasing urbanization, along with tourism, has posed a major threat to the Kumaun Himalayan Lakes, Uttarakhand, India. The total metal concentration in the water, interstitial water, and sediments along with the metal fractionation studies were carried out to understand the remobilization of the trace metals from the sediments of the lakes. The high concentration of the metals in the water column of the lakes generally decreases with depth and the metals release from the sediment is mainly due to the prevalence of anoxic condition at the sediment–water interface and sediment column. The sediment shows that metals Fe and Cr are derived from detrital source, whereas Co, Ni, and Zn are derived mainly from the organic matter dissolution. The sparse correlation of the trace metals with Ti shows most of the metals have chiefly re-precipitated from the water column. The metals speciation studies also supports that metals experience a high rate of anoxic dissolution and their precipitation onto the sediments are determined by the sediment composition and organic matter content. The high concentration of manganese in the interstitial water in the lakes indicates dissolution of organic matter. The released manganese is adsorbed/precipitated as carbonate phase (Nainital Lake) and oxide pahse (in other lakes). The study shows that the trace metals are regenerated from the sediments due to oxyhydroxide dissolution and organic matter decomposition.     

Organochlorine pesticide residues in drinking water in the rural areas of Haryana,India

Drinking water samples collected from rural areas of three districts of Haryana during pre-monsoon and post-monsoon periods were analysed for the presence of organochlorine pesticide residues. The main source of drinking water in rural areas, i.e. groundwater in Ambala and Gurgaon districts and surface water supply in Hisar district, was found to be contaminated with isomers of HCH and endosulfan and metabolites of DDT, whereas dieldrin remained below detection limits. During the study period, the mean values observed for total HCH, DDT and endosulfan were 87.6, 848.2, and 27.4 ng/L and 99.8, 275.3 and 164.2 ng/L, respectively, for Ambala and Gurgaon districts. In the case of Hisar district, the values were 78.5, 115.9, and 53.0 ng/L, respectively. During the study period, 37% of the samples exceeded the total pesticide level of 500 ng/L indicated in the EECD directive for drinking water. Seasonal variations of pesticide residues were also observed during the study period.     

Occurrence of estrogen hormones in biosolids,animal manure and mushroom compost

The presence of natural estrogen hormones as trace concentrations in the environment has been reported by many researchers and is of growing concern due to its possible adverse effects on the ecosystem. In this study, municipal biosolids, poultry manure (PM) and cow manure (CM), and spent mushroom compost (SMC) were analyzed for the presence of seven estrogen hormones. 17α-estradiol, 17β-estradiol, 17α-dihydroequilin, and estrone were detected in the sampled biosolids and manures at concentrations ranging from 6 to 462 ng/g of dry solids. 17α-estradiol, 17β-estradiol, and estrone were also detected in SMC at concentrations ranging from 4 to 28 ng/g of dry solids. Desorption experiments were simulated in the laboratory using deionized water (milli-Q), and the aqueous phase was examined for the presence of estrogen hormones to determine their desorption potential. Very low desorption of 0.4% and 0.2% estrogen hormones was observed from municipal biosolids and SMC, respectively. An estimate of total estrogen contribution from different solid waste sources is reported. Animal manures (PM and CM) contribute to a significant load of estrogen hormones in the natural environment.     

Energy Security: A Robust Optimization Approach to Design a Robust European Energy Supply via TIAM-WORLD

Energy supply routes to a given region are subject to random events, resulting in partial or total closure of a route (corridor). For instance, a pipeline may be subject to technical problems that reduce its capacity. Or, oil supply by tanker may be reduced for political reasons or because of equipment mishaps at the point of origin or again, by a conscious decision by the supplier in order to obtain economic benefits. The purpose of this article is to formulate a simplified version of the above issue that mainly addresses long-term uncertainties. The formulation is done via a version of the TIAM-WORLD Integrated Model, modified to implement the approach of robust optimization. In our case, the approach can be interpreted as a revival of chance-constrained programming under the name of distributionally robust, or ambiguous, chance-constrained programming. We apply the approach to improve the security of supply to the European Energy system. The resulting formulation provides several interesting features regarding the security of EU energy supply and has also the advantage to be numerically tractable.     

Performance evaluation of two commercial chemiluminescence NOx analysers according to European Standard EN 14211

According to Directive 2008/50/EC, all equipment used for NO(x) fixed measurements must comply with the reference method or equivalent by 11 June 2013. Up to that date, non-type-approved equipment can continue to be used in air monitoring networks and will probably also be used in air pollution studies even after that date. In this context, it is advisable to know how these "old" measuring instruments respond to the requirements of European Standard EN 14211: 2005: Ambient Air Quality--Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence. In this work, we carry out a thorough performance evaluation of two commercial NO(x) analysers, both purchased before 2010, according to the mentioned Standard. Results show that water vapour interference is one of the most important disconformities with this Standard. The expanded uncertainty estimation of both analysers was below the quality objective of the above-mentioned Directive (15%); however, this calculation was performed by applying some modifications to the proposed model of Standard EN 14211. These modifications are also discussed in the paper.     

Influence of a portable air treatment unit on health-related quality indicators of indoor air in a classroom

During periods of two weeks in February and June 2010 the performance of portable air treatment units (PATUs) was evaluated in a primary school classroom using indicators of indoor air quality. Air samples were collected in an undisturbed setting on weekend days and in an occupied setting during teaching hours. In the first week PATUs were turned off and in the second week they were turned on. On weekend days PATUs reduced indoor levels of PM-10 by 87% in February and by 70% in June compared to weekend days when PATUs were turned off. On schooldays, indoor PM-10 was increased by 6% in February and reduced by 42% in June. For PM-2.5 reductions on weekend days were 89% in February and 80% in June. On school days PM-2.5 was increased by 15% in February and reduced by 83% in June. Turning on the PATUs reduced total VOC by 80% on weekend days and by 57% on school days (but not in June). No influence on formaldehyde, NO(2), O(3) and molds was observed. PATUs appeared to be less effective in removal of air pollutants when used in an occupied classroom compared to an unoccupied setting. Our study suggests that such devices should be tested in real-life settings to evaluate their influence on indoor air quality.     

Workplace aerosol mass concentration measurement using optical particle counters

Direct-reading aerosol measurement usually uses the optical properties of airborne particles to detect and measure particle concentration. In the case of occupational hygiene, mass concentration measurement is often required. Two aerosol monitoring methods are based on the principle of light scattering: optical particle counting (OPC) and photometry. The former analyses the light scattered by a single particle, the latter by a cloud of particles. Both methods need calibration to transform the quantity of scattered light detected into particle concentration. Photometers are simpler to use and can be directly calibrated to measure mass concentration. However, their response varies not only with aerosol concentration but also with particle size distribution, which frequently contributes to biased measurement. Optical particle counters directly measure the particle number concentration and particle size that allows assessment of the particle mass provided the particles are spherical and of known density. An integrating algorithm is used to calculate the mass concentration of any conventional health-related aerosol fraction. The concentrations calculated thus have been compared with simultaneous measurements by conventional gravimetric sampling to check the possibility of field OPC calibration with real workplace aerosols with a view to further monitoring particle mass concentration. Aerosol concentrations were measured in the food industry using the OPC GRIMM? 1.108 and the CIP 10-Inhalable and CIP 10-Respirable (ARELCO?) aerosol samplers while meat sausages were being brushed and coated with calcium carbonate. Previously, the original OPC inlet had been adapted to sample inhalable aerosol. A mixed aerosol of calcium carbonate and fungi spores was present in the workplace. The OPC particle-size distribution and an estimated average particle density of both aerosol components were used to calculate the mass concentration. The inhalable and respirable aerosol fractions calculated from the OPC data are closely correlated with the results of the particle size-selective sampling using the CIP 10. Furthermore, the OPC data allow calculation of the thoracic fraction of workplace aerosol (not measured by sampling), which is interesting in the presence of allergenic particles like fungi spores. The results also show that the modified COP inlet adequately samples inhalable aerosol in the range of workplace particle-size distribution.     

Monitoring water quality in reservoirs for human supply through multi-biomarker evaluation in tropical fish

Paraíba do Sul River is located at a very densely inhabited region of Brazil crossing the three most industrialized states of the country (S?o Paulo, Minas Gerais and Rio de Janeiro states). As a result, industrial and farming residues as well as urban sewage are frequently disposed without appropriate treatment. The current study aimed at investigating the water quality in three reservoirs along the Paraíba do Sul River (Ilha dos Pombos, Santa Cecília and Santa Branca), through physiological, morphological, biochemical, and genetic biomarkers. The bioindicator chosen was the catfish Pimelodus maculatus, sampled during the dry (June 2008) and rainy (February 2009) seasons. Also, some water physicochemical parameters were analyzed from the sampling sites, but displayed no alterations according to the Brazilian Agency for Water Quality Legislation. Branchial carbonic anhydrase activity was inhibited in the dry season, while renal carbonic anhydrase activity was inhibited in the rainy season in the Santa Branca reservoir, indicating disturbance of osmoregulatory and acid-base regulation processes. Histopathological alterations were observed in the gills (neoplasic and tissue hyperplasia processes) and liver (necrosis), indicating serious damage to the functional integrity of these organs. A high incidence of melanomacrophage centers was observed in the liver, suggesting an intense immune response in all reservoirs. Acetylcholinesterase and catalase activity showed also differences corroborating some morphological results. Likewise, the induction of the micronucleus and DNA damage indicate genotoxicity, but mainly in the Santa Branca reservoir. Thus, the health status of P. maculatus warrants caution in the use of the water from the 3 reservoirs for direct human consumption, particularly after the accidental spill of endosulfan in November 2008, three months before the rainy season sampling.     

Terrain Discontinuity Effects in the Regional Flow of a Complex Karstified Aquifer

Karst aquifers are characterized by spatial heterogeneity due to the presence of highly permeable channels and conduits in low-permeable fractured rocks (matrix block). Recent studies have reported a close relationship between surface and subsurface water in karstic regions due to the water flow through a complicated network of paths formed by fracture intersections. Subsurface flow in karstified aquifers ranges between conduit flow, in large passages with relatively high flow velocities, and diffuse flow, in the matrix block where Darcy’s law is still valid. In this paper, we present the simulation of a complex karstified aquifer system in Crete, Greece, where the presence of main faults drastically affects the regional flow. A discrete fracture approach in conjunction with an equivalent porous medium approach was adopted to simulate the mixed flow in the area of interest. The simulation results have shown that the length and the orientation of the dominant faults, primarily during the rainy season, affect the flow field.