Removal of malachite green from water samples by cloud point extraction using Triton X-100 as non-ionic surfactant

A surfactant mediated cloud point extraction (CPE) procedure has been developed to remove color from wastewater containing malachite green using Triton X-100 as non-ionic surfactant. The effects of the concentration of the surfactant, temperature and salt concentration on the different concentrations of dye have been studied and optimum conditions were obtained for the removal of malachite green. The concentration of malachite green in the dilute phase was measured using UV–Vis spectrophotometer. It was found that the separation of phases was complete and the recovery of malachite green was very effective in the presence of NaCl as an electrolyte. The results showed that up to 500 ppm of malachite green can quantitatively be removed (>95%) by CPE procedure in a single extraction using optimum conditions.     

Photo-polymerization of triclosan in aqueous solution induced by ultraviolet radiation

The formation of 2,8-dichlorodibenzo-p-dioxin and other harmful degradation products in the photo-degradation process of triclosan is of increasing concern. Here we worked on the identification of polymerized products at high triclosan concentration and on the mechanism of photoreaction. Five dimmers and two trimers of triclosan were detected by liquid chromatography-mass spectrum analysis. 2,8-dichlorodibenzo-p-dioxin was also identified by comparing with an authentic standard. Relatively low pH and high concentration favored the polymerization of triclosan. Three main routes of photoreaction were postulated, namely dechlorination, ring closure and polymerization.     

Ethylenediamine-modified activated carbon for aqueous lead adsorption

This study is to develop a carbon-based adsorbent containing multiple functional ligands for effective removal of lead ions from aqueous media. Activated carbon was oxidized by nitric acid, followed by chlorination with thionyl chloride and reaction with ethylenediamine. Modified activated carbon (MAC) was characterized using scanning electron microscopy in conjunction of energy dispersive spectroscopy (SEM-EDS), Fourier transform infrared spectroscopy (FT-IR), and potentiometric titration. Surface characterizations confirmed that carboxyl, amine, and chlorine functional groups were effectively introduced onto the carbon surface by the treatments. The modifications lowered the pH at the point of zero charge (pH_pzc) from 9.6 to 2.55 and resulted in more negatively charged surfaces. Adsorptive experiments showed that aqueous Pb removal by MAC was faster, with a 62% higher capacity than the original activated carbon (60.2 vs. 37.2 mg g⁻¹).     

Perception of people for the risk of Tianwan nuclear power plant

A questionnaire survey of residents’ risk perceptions related to Taiwan nuclear power plant in China was carried out to explore the determining factors that affect individual risk perception. This study proposed to pursue a more comprehensive understanding of factors that affected individual risk perception to nuclear power plants. Covariance structure analysis was conducted using risk perceptions of nuclear power as dependent variable and including interest and knowledge levels of nuclear power, acceptability, benefit perception, trust in nuclear power operation, and trust in government as independent variables. The use of the hypothesis of Elaboration likelihood model (ELM) was also proposed. The results showed that persons with higher levels of interest and knowledge of nuclear power had their own perceptions of risk closely associated with acceptability and potential benefits of nuclear power. In contrast, persons with no interest in and knowledge of nuclear power would have risk perceptions related to their trust in nuclear operation and the government, which partially supported the ELM hypothesis. All these results indicated that the government in China plays an important role in rational risk perceptions, and well-designed communication of risks will help the public to be involved in risk management and improve people’s rational acceptance of risk.     

Public perception of environmental issues across socioeconomic characteristics: A survey study inWujin,China

In developing countries, there is controversy over the correct perception regarding environmental and developmental issues. Few studies have examined the perception of low-income nationals in regards to social and environmental issues. This paper looks at the relationship between socio-demographic factors and the groups’ perceived priority regarding environmental and social issues in Wujin County. The results indicated that most residents, specifically the young, government employed and the urban community consider environmental issues to be serious, especially in relation to air pollution and water pollution. Furthermore, many residents feel it is important to rank environmental problems that are related to other social and economic issues, and that environmental protection must be set as a priority in Wujin County. Compared to social issues, environmental concern was greater among the young, government employed, and the urban community, because of their higher education and affluence. In addition, 66.2% of residents consider environmental protection to be more important than economic development. Thus, environmental protection must be set as a high priority in Wujin County, in order to face the many social and environmental challenges inherent in development.     

Nitrogen-retaining property of compost in an aerobic thermophilic composting reactor for the sanitary disposal of human feces

Aerobic composting is a method for the sanitary disposal of human feces as is used in bio-toilet systems. As the products of composting can be utilized as a fertilizer, it would be beneficial if the composting conditions could be more precisely controlled for the retention of fecal nitrogen as long as possible in the compost. In this study, batch experiments were conducted using a closed aerobic thermophilic composting reactor with sawdust as the bulk matrix to simulate the condition of a bio-toilet for the sanitary disposal of human feces. Attention was paid to the characteristics of nitrogen transformation. Under the controlled conditions of temperature at 60°C, moisture content at 60%,anda continuous air supply, more than 70% fecal organic removal was obtained, while merely 17% fecal nitrogen loss was observed over a two-week composting period. The nitrogen loss was found to occur mainly in the first 24 h with the rapid depletion of inorganic nitrogen but with an almost unchanged organic nitrogen content. The fecal NH₄-N which was the main component of the inorganic nitrogen ( > 90%) decreased rapidly in the first day, decreased at a slower rate over the following days, and finally disappeared entirely. The depletion of NH₄-N was accompanied by the accumulation of NH₃ gas in the ammonia absorber connected to the reactor. A mass balance between the exhausted NH₃ gas and the fecal NH₄-N content in the first 24 hours indicated that the conversion of ammonium into gaseous ammonia was the main reason for nitrogen loss. Thermophilic composting could be considered as a way to keep a high organic nitrogen content in the compost for better utilization as a fertilizer.     

Biosorption of Cr(III) from aqueous solution by freeze-dried activated sludge: Equilibrium,kinetic and thermodynamic studies

Batch biosorption experiments were conducted to remove Cr(III) from aqueous solutions using activated sludge from a sewage treatment plant. An investigation was conducted on the effects of the initial pH, contact time, temperature, and initial Cr(III) concentration in the biosorption process. The results revealed that the activated sludge exhibited the highest Cr(III) uptake capacity (120 mg·g⁻¹) at 45°C, initial pH of 4, and initial Cr(III) concentration of 100 mg·L⁻¹. The biosorption results obtained at various temperatures showed that the biosorption pattern accurately followed the Langmuir model. The calculated thermodynamic parameters, ΔG^o (−0.8– −4.58 kJ·mol⁻¹), ΔH^o (15.6–44.4 kJ·mol⁻¹), and ΔS^o (0.06–0.15 kJ·mol⁻¹·K⁻¹) clearly indicated that the biosorption process was feasible, spontaneous, endothermic, and physical. The pseudo first-order and second-order kinetic models were adopted to describe the experimental data, which revealed that the Cr(III) biosorption process conformed to the second-order rate expression and the biosorption rate constants decreased with increasing Cr(III) concentration. The analysis of the values of biosorption activation energy (E_a = −7 kJ·mol⁻¹) and the intra-particle diffusion model demonstrated that Cr(III) biosorption was film-diffusion-controlled.     

Impact of solids on biphasic biodegradation of phenanthrene in the presence of hydroxypropyl-<Emphasis Type="Italic">β</Emphasis>-cyclodextrin (HPCD)

The consequence of polycyclic aromatic hydrocarbons (PAHs) in the environment is of great concern. The hydrophobic properties of PAHs significantly impact phase distribution causing limited bioavailability. Enhanced biodegradation has been extensively carried out by surfactants and the redeployment effect was recognized. However, the quantitative relationship concerning the impact of solids was rarely reported. A batch of biphasic tests were carried out by introducing Mycobacterium vanbaalenii PYR-1 and hydroxypropyl-β-cyclodextrin (HPCD) into a mixture of phenanthrene solution and various glass beads (GB37-63, GB105-125, and GB350-500). The comparative results demonstrated that HPCD had little effect on microbial growth and was not degradable by bacterium. A model was proposed to describe the biodegradation process. The regression results indicated that the partition coefficient k _d (1.234, 0.726 and 0.448 L·g^?1) and the degradation rate k (0 mmol·L^?1: 0.055, 0.094, and 0.112; 20 mmol·L^?1: 0.126, 0.141, and 0.156; 40 mmol·L^?1: 0.141, 0.156 and 0.184 d^?1) were positively and negatively correlated with the calculated total surface area (TSA) of solids, respectively. Degradation enhanced in the presence of HPCD, and the enhancing factor f was calculated (20 mmol·L^?1: 15.16, 40.01, and 145.5; 40 mmol·L^?1: 13.29, 37.97, and 138.4), indicating that the impact of solids was significant for the enhancement of biodegradation.     

Development of pretreatment protocol for DNA extraction from biofilm attached to biologic activated carbon (BAC) granules

The biologic activated carbon (BAC) process is widely used in drinking water treatments. A comprehensive molecular analysis of the microbial community structure provides very helpful data to improve the reactor performance. However, the bottleneck of deoxyribonucleic acid (DNA) extraction from BAC attached biofilm has to be solved since the conventional procedure was unsuccessful due to firm biomass attachment and adsorption capacity of the BAC granules. In this study, five pretreatments were compared, and adding skim milk followed by ultrasonic vibration was proven to be the optimal choice. This protocol was further tested using the vertical BAC samples from the full-scale biofilter of Pinghu Water Plant. The results showed the DNA yielded a range of 40 μg·g^-1 BAC (dry weight) to over 100 μg·g^-1 BAC (dry weight), which were consistent with the biomass distribution. All results suggested that the final protocol could produce qualified genomic DNA as a template from the BAC filter for downstream molecular biology researches.     

Sorption of tetracycline to sediments and soils: assessing the roles of pH,the presence of cadmium and properties of sediments and soils

Batch sorption experiments were conducted to evaluate the sorption behavior of tetracycline (TC, H₃L) on sediments and soils in the presence and absence of cadmium (Cd), as affected by pH and properties of sediments and soils. The results indicated stronger nonlinearity and higher capacity of TC sorption on sediments than on soils. Sorption of TC also strongly depended on environmental factors and sediment/soil properties. Lower pH facilitated TC sorption through a cation exchange mechanism, which also took place at pH values above 5.5, where TC existed as a zwitterion (H₂L⁰) or anions (HL^- and L^2-). When pH was above 7, however, ligand-promoted dissolution of TC might occur due to TC weakening the Al-O bond of aluminum oxide and the Fe-O bond of iron oxide. Natural organic matter (NOM) plays a more important role in TC sorption than cation exchange capacity (CEC) and clay contents. The presence of Cd (II) increased TC sorption on both sediments and soils, which resulted from the decrease of equilibrium solution pH caused by Cd²⁺ exchange with H⁺ ions of sediment/soil surfaces. The increase of TC sorption was also related to the formation of TC-Cd complexes, where Cd²⁺ acted as a bridge between the sediment/soil and TC.