Femoral secretions and copulatory plugs convey chemical information about male identity and dominance status in Iberian rock lizards (Lacerta monticola)

Socially dominant males often signal their status to rival males and/or females. We tested the hypotheses that Lacerta monticola femoral gland secretions and copulatory plugs convey chemical information about male identity and dominance status. We estimated male dominance status by staging male–male agonistic encounters in a neutral arena. We then conducted two experiments to compare male tongue-flick behavior toward chemical stimuli consisting of cotton swabs bearing (1) deionized water (control), the lizard’s own femoral secretions, and the femoral secretions of another male and (2) phosphate-buffered saline solution (control), the lizard’s own plug products, and the plug products of another male. Results indicate that males discriminated their own femoral secretions and plugs from those of other males. They also discriminated morphological attributes of other males that were associated with dominance status based on chemical cues arising from femoral secretions and discriminated the dominance status of other males based on chemical cues arising from the plugs. Femoral secretions that convey information about male identity and dominance status may be hypothesized to function in the establishment of L. monticola dominance hierarchies through scent-marking of territories. We suggest that copulatory plugs and femoral secretions may allow males to scent-mark the female body and postulate that this behavior may influence male and female reproductive decisions under selective pressures of sperm competition.     

Assessment of medical waste management at a primary health-care center in São Paulo,Brazil

According to the Brazilian law, implementation of a Medical Waste Management Plan (MWMP) in health-care units is mandatory, but as far as we know evaluation of such implementation has not taken place yet. The purpose of the present study is to evaluate the improvements deriving from the implementation of a MWMP in a Primary Health-care Center (PHC) located in the city of São Paulo, Brazil. The method proposed for evaluation compares the first situation prevailing at this PHC with the situation 1 year after implementation of the MWMP, thus allowing verification of the evolution of the PHC performance. For prior and post-diagnosis, the method was based on: (1) application of a tool (check list) which considered all legal requirements in force; (2) quantification of solid waste subdivided into three categories: infectious waste and sharp devices, recyclable materials and non-recyclable waste; and (3) identification of non-conformity practices. Lack of knowledge on the pertinent legislation by health workers has contributed to non-conformity instances. The legal requirements in force in Brazil today gave origin to a tool (check list) which was utilized in the management of medical waste at the health-care unit studied. This tool resulted into an adequate and simple instrument, required a low investment, allowed collecting data to feed indicators and also conquered the participation of the unit whole staff. Several non-conformities identified in the first diagnosis could be corrected by the instrument utilized. Total waste generation increased 9.8%, but it was possible to reduce the volume of non-recyclable materials (11%) and increase the volume of recyclable materials (4%). It was also possible to segregate organic waste (7%), which was forwarded for production of compost. The rate of infectious waste generation in critical areas decreased from 0.021 to 0.018 kg/procedure. Many improvements have been observed, and now the PHC complies with most of legal requirements, offers periodic training and better biosafety conditions to workers, has reduced the volume of waste sent to sanitary landfills, and has introduced indicators for monitoring its own performance. This evaluation method might subsidize the creation and evaluation of medical waste management plans in similar heath institutions.     

An online preconcentration system for the determination of uranium in water and effluent samples

Amberlite XAD-4 resin functionalized with β-nitroso-α-naphthol was applied to an online system for the preconcentration and determination of uranium. U (VI) ions were retained on the minicolumn at an appropriate pH and then desorbed with acid solution. The amount of uranium in the eluate was measured spectrophotometrically at 650 nm using Arsenazo III as a colorimetric reagent. The limit of detection and the preconcentration factor were 1.8 μg L^???1 and 10, respectively. The chemical and flow variables affecting the preconcentration were studied. The influence of several ions on the system was also investigated. The method was successfully applied for the evaluation of uranium in water and in effluent samples.     

Occupational exposure of farm workers to pesticides: biochemical parameters and evaluation of genotoxicity

To assess the effects of exposure to complex mixtures of pesticides in farm workers from two communities from Rio Grande do Sul, Brazil, we evaluated the activities of butyrylcholinesterase (BChE) and delta-aminolevulinic acid dehydratase (ALA-D) enzymes, hematological, lipid parameters, and genotoxicity using two tests to detect DNA damage, the Comet assay in peripheral blood leukocytes and the micronucleus (MN) test in oral mucosa cells. The use of personal protective equipment (PPE), age and smoke habits were considered in the analysis. There was a significant decrease in the BChE and ALA-D activities in farm workers (n=37) relative to the control group (n=20) (P< or =0.05 and P< or =0.001, respectively). The Comet assay in peripheral blood leukocytes showed that the Damage index and Damage frequency observed in the exposed group were significantly higher in relation to the controls (P< or =0.001, and P< or =0.05, respectively). No differences were detected regarding the hematological parameters, lipids profile, and MN frequencies. In addition, no significant differences were observed between younger (< or =38 years) and older subjects (>38 years), or between smokers and non-smokers within the groups, either by Comet assay or MN test. However, the use of PPE seems to be important in the prevention of contamination, as suggested by BChE levels and Comet assay results.     

Modelling the photochemical pollution over the metropolitan area of Porto Alegre,Brazil

The main purpose of this study is to evaluate the photochemical pollution over the Metropolitan Area of Porto Alegre (MAPA), Brazil, where high concentrations of ozone have been registered during the past years. Due to the restricted spatial coverage of the monitoring air quality network, a numerical modelling technique was selected and applied to this assessment exercise. Two different chemistry-transport models – CAMx and CALGRID – were applied for a summer period, driven by the MM5 meteorological model. The meteorological model performance was evaluated comparing its results to available monitoring data measured at the Porto Alegre airport. Validation results point out a good model performance. It was not possible to evaluate the chemistry models performance due to the lack of adequate monitoring data. Nevertheless, the model intercomparison between CAMx and CALGRID shows a similar behaviour in what concerns the simulation of nitrogen dioxide, but some discrepancies concerning ozone. Regarding the fulfilment of the Brazilian air quality targets, the simulated ozone concentrations surpass the legislated value in specific periods, mainly outside the urban area of Porto Alegre. The ozone formation is influenced by the emission of pollutants that act as precursors (like the nitrogen oxides emitted at Porto Alegre urban area and coming from a large refinery complex) and by the meteorological conditions.     

Evaluation of levels, sources and distribution of toxic elements in PM10 in a suburban industrial region, Rio de Janeiro, Brazil

The Oswaldo Cruz Foundation Campus (FIOCRUZ), in a suburban region of the city of Rio de Janeiro, was selected as a case study to assess the pollution released from vehicle and industrial facilities in Basin III, the most polluted area of the city. Concentrations of particulate matter (PM10) and trace metals in airborne particles were determined in an intensive field campaign. The samplings were performed every six days for 24 h periods, using a PM10 high volume sampler, from September 2004 to August 2005. PM10 mass concentrations were determined gravimetrically and the metals by ICP-OES. For PM10, the arithmetic mean for the period is 169 ± 42 μg m⁻³ which is 3.4 times the national recommended standard of 50 μg m⁻³. Additionally, 51% of the samplings exceeded the recommended 24 h limit of 150 μg m⁻³. Ca, Mg, Fe, Zn and Al were the metals that presented the higher concentrations. The correlation matrix gave two main clusters and three significant principal components (PC). Both PC1 and PC2 are associated to crustal, vehicular and industrial emissions while PC3 is mainly associated to geological material. Enrichment factors for Zn, Cu, Cd and Pb indicate that for these elements, anthropic sources prevail over natural inputs. PM10 levels showed a good correlation with hospital admissions for respiratory diseases in children and elderly people.     

Chromium fractionation and speciation in natural waters

It is common for leather industries to dump chromium-contaminated effluent into rivers and other bodies of water. Thus, it is crucial to know the impacts caused by this practice to the environment. A study on chromium partitioning and speciation, with determination at trace levels, was carried out in a potentially contaminated creek. Chromium fractionation and speciation was performed using a flow-injection preconcentration system and detection by flame atomic absorption spectrometry. High levels of this element were found in the particulate material (449-9320 mg kg(-1)), which indicates its compatibility with this fraction. The concentration of Cr(iii) in the water samples collected ranged from 5.2-105.2 μg L(-1). Cr(vi) was always below of the DL (0.3 μg L(-1)). Chromium accumulation observed in the sediment (873-1691 mg kg(-1)) may confirm contamination due to the long term release of contaminated effluents in the creek.     

Solar CPC pilot plant photocatalytic degradation of bisphenol A in waters and wastewaters using suspended and supported-TiO2. Influence of photogenerated species

Photocatalytic degradation of bisphenol A (BPA) in waters and wastewaters in the presence of titanium dioxide (TiO₂) was performed under different conditions. Suspensions of the TiO₂ were used to compare the degradation efficiency of BPA (20 mg L^?1) in batch and compound parabolic collector (CPC) reactors. A TiO₂ catalyst supported on glass spheres was prepared (sol–gel method) and used in a CPC solar pilot plant for the photodegradation of BPA (100 μg L^?1). The influence of OH·, O₂ ^·?, and h ⁺ on the BPA degradation were evaluated. The radicals OH· and O₂ ^·? were proved to be the main species involved on BPA photodegradation. Total organic carbon (TOC) and carboxylic acids were determined to evaluate the BPA mineralization during the photodegradation process. Some toxicological effects of BPA and its photoproducts on Eisenia andrei earthworms were evaluated. The results show that the optimal concentration of suspended TiO₂ to degrade BPA in batch or CPC reactors was 0.1 g L^?1. According to biological tests, the BPA LC₅₀ in 24 h for E. andrei was of 1.7?×?10^?2 mg cm^?2. The photocatalytic degradation of BPA mediated by TiO₂ supported on glass spheres suffered strong influence of the water matrix. On real municipal wastewater treatment plant (MWWTP) secondary effluent, 30 % of BPA remains in solution; nevertheless, the method has the enormous advantage since it eliminates the need of catalyst removal step, reducing the cost of treatment.     

Exposure to elevated ozone levels differentially affects the antioxidant capacity and the redox homeostasis of two subtropical Phaseolus vulgaris L. varieties

Ozone (O₃) has become one of the most toxic air pollutants to plants worldwide. However, investigations on O₃ impacts on crops health and productivity in South America countries are still scarce. The present study analyzed the differences on the enzymatic and non-enzymatic antioxidant system in foliar tissue of two subtropical Phaseolus vulgaris varieties exposed to high O₃ concentration. Both varieties were negatively impacted by the pollutant, but the responses between each variety were quite distinct. Results revealed that Irai has higher constitutive levels of reactive oxygen species (ROS) and ascorbate (AsA) concentration, but lower total thiol levels and catalase immunocontent. In this variety catalase protein concentration was increased after O₃ exposure, indicating a better cellular capacity to reduce hydrogen peroxide. On the opposite, Fepagro 26-exposed plants increased ROS generation and AsA concentration, but had the levels of total thiol content and catalase protein unchanged. Furthermore, O₃ treatment reduced the levels of chlorophylls a and b, and the relationship analysis between the chlorophyll ratio (a/b) and protein concentration were positively correlated indicating that photosynthetic apparatus is compromised, and thus probably is the biomass acquisition on Fepagro 26. Differently, O₃ treatment of Irai did not affect chlorophylls a and b content, and loss on the protein content was lower. Altogether, these data suggest that early accumulation of ROS on Fepagro 26 are associated with an insufficient leaf antioxidant capacity, which leads to cell structure disruption and impairs the photosynthesis. Irai seems to be more tolerant to O₃ toxic effects than Fepagro 26, and the observed differences on O₃ sensitivity between the two varieties are apparently based on constitutive differences involved in the maintenance of intracellular redox homeostasis.     

Analytical methods and validation for determining trace elements in red wines

The objective of this work is to quantify As, Hg, Cd, Ni and Pb in Portuguese red wines. First, the methods for the quantification of trace elements in red wines were validated. Several pre-treatments were compared, namely a pre-digestion process with HNO₃, a pre-oxidation step with H₂O₂, and a spiking step of wine samples with a known concentration of the trace elements analyzed. Except for As, it was determined that the quantification of the trace elements does not require a pre-digestion process with HNO₃. For all of the trace elements analyzed, a pre-oxidation step with H₂O₂ may enable an accurate quantification. The techniques chosen for the quantification of trace elements were hydride generation atomic absorption spectrometry (HGAAS) for As and Hg, electrothermal atomic absorption spectrometry (ETAAS) for Cd, and flame atomic absorption spectrometry (FAAS) for Ni and Pb. In the second stage of this work, 25 Portuguese red wines spanning all of the red wine-producing regions were analyzed for all of the five trace elements referred to above. Only Cd and Pb have shown concentrations above the limit values defined by the “Organization Internationale de la Vigne et du Vin.” The Target Hazard Quotient (THQ) equation was used to determine in which wine-producing regions that wine consumption can be a problem for public health in terms of the concentrations of the five trace elements analyzed. THQ values have indicated that for the universe of the 25 red wines analyzed no region produces wines that can pose problems for public health, when the Portuguese red wine standard consumption is considered.