Macro,Meso, and Micro‐Efficiencies in Water Resources Management: A New Framework Using Water Balance1

Haie, Naim and Andrew A. Keller, 2012. Macro, Meso, and Micro‐Efficiencies in Water Resources Management: A New Framework Using Water Balance. Journal of the American Water Resources Association (JAWRA) 48(2): 235‐243. DOI: 10.1111/j.1752‐1688.2011.00611.x Abstract: One of the most important performance indicators for water resources systems (WRSs) management is efficiency. Here, water balance, based on mass conservation, is utilized to systemically develop three levels of composite efficiency indicators for a WRS, which are configurable based on two types of water totals: total inflow and total consumption (outflow that effectively is not available for reuse). The indices characterize hydrology of an area by including in their formulations the flow dynamics at three integrated levels. Furthermore, the usefulness of water is incorporated into the indicators by defining two weights: one for quality, and the other for beneficial attributes of water use. Usefulness Criterion is the product of quality and beneficial weights, emphasizing the equal significance of the two dimensions. Both of these weights depend on the system itself and the priorities of the supervising organization, which also are shaped by the objectives and values of the given society. These concepts lead to the definition of Macro, Meso, and Micro‐Efficiencies, which form a set of integrated indicators that explicitly promotes stakeholder involvement in evaluation and design of WRSs. Macro, Meso, and Micro‐Efficiencies should be maximized for both water totals, which is an integrated prerequisite for sustainability and is less promoted by competing stakeholders. To demonstrate this new framework, it is applied to published data for urban and agricultural cases and some results are explained.     

Biochar: a synthesis of its agronomic impact beyond carbon sequestration

Biochar has been heralded as an amendment to revitalize degraded soils, improve soil carbon sequestration, increase agronomic productivity, and enter into future carbon trading markets. However, scientific and economic technicalties may limit the ability of biochar to consistently deliver on these expectations. Past research has demonstrated that biochar is part of the black carbon continuum with variable properties due to the net result of production (e.g., feedstock and pyrolysis conditions) and postproduction factors (storage or activation). Therefore, biochar is not a single entity but rather spans a wide range of black carbon forms. Biochar is black carbon, but not all black carbon is biochar. Agronomic benefits arising from biochar additions to degraded soils have been emphasized, but negligible and negative agronomic effects have also been reported. Fifty percent of the reviewed studies reported yield increases after black carbon or biochar additions, with the remainder of the studies reporting alarming decreases to no significant differences. Hardwood biochar (black carbon) produced by traditional methods (kilns or soil pits) possessed the most consistent yield increases when added to soils. The universality of this conclusion requires further evaluation due to the highly skewed feedstock preferences within existing studies. With global population expanding while the amount of arable land remains limited, restoring soil quality to nonproductive soils could be key to meeting future global food production, food security, and energy supplies; biochar may play a role in this endeavor. Biochar economics are often marginally viable and are tightly tied to the assumed duration of agronomic benefits. Further research is needed to determine the conditions under which biochar can provide economic and agronomic benefits and to elucidate the fundamental mechanisms responsible for these benefits.     

3-D Flow Modeling of a Hazardous Waste Incinerator

A three-dimensional flow model of a hazardous waste incinerator kiln and vertical secondary combustion chamber arrangement was constructed to evaluate critical system parameters. The chamber wall configuration, location and arrangement of burners, and the positioning of the outlet duct were examined to determine the critical secondary combustion chamber gas residence time and mixing of the combustion flows. The scale model consisted of the rotary kiln as a primary combustion chamber, the secondary combustion chamber, two burners, and the exhaust ducting. Flue gas velocities in the model inlets and outlet were maintained to provide a Reynolds numbers equal to the full size unit. Patterns of smoke which were injected into the model inlets were viewed to evaluate flow mixing. Slow motion playback of video tape was used to determine the minimum residence time of flow in the high temperature combustion zone. The results of the model study were used to complete the engineering of a waste incineration system.     

Emissions from Carbureted and Timed Port Fuel Injected Engines

A comparison was made between the exhaust emission characteristics of a popular make car when equipped with the stock carburetor and when equipped with a timed-port fuel injection system. A brief optimization study was made to adjust the spark timing and fuel flow characteristics to minimize emissions. Performance and economy were compared between the fuel injected and carbureted versions. Emission measurements of CO, CO₂, and hydrocarbon were made in road tests by proportional sampling and through the California Cycle by continuous nondispersive infra red instrumentation.     

A 10 μm Outpoint Size Selective Inlet for Hi-Vol Samplers

A Two-stage Size Selective Inlet for use with hi-vol samplers was designed and tested. The inlet, which operates at a flow rate of 1.13 m³/min, is shown to have a cutpoint of 9.8 μm and a fractionation curve slope of 1.45. The cutpoint is well within the EPA suggested limits of 10 ± 1 μm. Fractionation is not affected by wind speed over the test range of 2-24 km/h.

Re-entrainment or bounce of solid particles is not of consequence. The difference in penetration of 20 μm aerodynamic diameter glass beads and liquid aerosols is less than 1% at all wind speeds.     

A yeast-based cytotoxicity and genotoxicity assay for environmental monitoring using novel portable instrumentation

An assay capable of simultaneously measuring both general toxicity and more subtle genotoxicity, in aqueous environmental samples, is described. The assay uses eukaryotic (yeast) cells, genetically modified to express a green fluorescent protein (GFP) whenever DNA damage, as a result of exposure to genotoxic agents, is repaired. A measure of the reduction in cell proliferation is used to characterise general toxicity producing familiar EC(50) and LOEC data. The assay protocol has been developed for proposed use in the field and hence employs dedicated, portable instrumentation, the development of which is described. A range of environmentally relevant substances has been evaluated using the assay, including solutions of metal ions, solvents and pesticides. Preliminary data comparing the yeast assay's response to that of a standard Daphnia test in the analysis of the toxicity of 34 varied industrial waste effluents are also presented. The sensitivity to a wide range of substances and effluents suggests the assay should be useful for environmental toxicity monitoring.     

Air Emission Inventories in North America: A Critical Assessment

Abstract

Although emission inventories are the foundation of air quality management and have supported substantial improvements in North American air quality, they have a number of shortcomings that can potentially lead to ineffective air quality management strategies. Major reductions in the largest emissions sources have made accurate inventories of previously minor sources much more important to the understanding and improvement of local air quality. Changes in manufacturing processes, industry types, vehicle technologies, and metropolitan infrastructure are occurring at an increasingly rapid pace, emphasizing the importance of inventories that reflect current conditions. New technologies for measuring source emissions and ambient pollutant concentrations, both at the point of emissions and from remote platforms, are providing novel approaches to collecting data for inventory developers. Advances in information technologies are allowing data to be shared more quickly, more easily, and processed and compared in novel ways that can speed the development of emission inventories. Approaches to improving quantitative measures of inventory uncertainty allow air quality management decisions to take into account the uncertainties associated with emissions estimates, providing more accurate projections of how well alternative strategies may work. This paper discusses applications of these technologies and techniques to improve the accuracy, timeliness, and completeness of emission inventories across North America and outlines a series of eight recommendations aimed at inventory developers and air quality management decision-makers to improve emission inventories and enable them to support effective air quality management decisions for the foreseeable future.     

Polyaromatic hydrocarbon exposure: an ecological impact ambiguity

Polyaromatic hydrocarbons (PAHs) represent a fraction of petroleum hydrocarbons and are currently one of the foremost sources of generating energy in today’s contemporary society. However, evidence highlighted in this review show that PAH pollution, as a result of oil spills, hazardous PAH-contaminated working environments and technologies which do not efficiently utilise fuels, as well as natural sources of emissions (e.g. forest fires) may have significant health implications for all taxa. The extent of damage to organisms from PAH exposure is dependent on numerous factors including degree and type of PAH exposure, nature of the environment contaminated (i.e. terrestrial or aquatic), the ability of an organism to relocate to pristine environments, type and sensitivity of organism to specific hydrocarbon fractions and ability of the organism to metabolise different PAH fractions. The review highlights the fact that studies on the potential damage of PAHs should be carried out using mixtures of hydrocarbons as opposed to individual hydrocarbon fractions due to the scarcity of individual fractions being a sole contaminant. Furthermore, potential damage of PAH-contaminated sites should be assessed using an entire ecological impact outlook of the affected area.