Effect of two major N-nitroso hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) metabolites on earthworm reproductive success

Soil and topical tests were employed to investigate the effect of two N-nitroso metabolites of RDX (hexahydro-1,3,5-trinitro-1,3,5-triazine) on earthworm reproduction. The lowest observed effect concentration (LOEC) for cocoon production and hatching was 50mg/kg for both hexahydro-1-nitroso-3,5-dinitro-1,3,5-triazine (MNX) and hexahydro-1,3,5-trinitroso-1,3,5-triazine (TNX) in soil. MNX and TNX also significantly affected cocoon hatching in soil (p<0.001) and in topical tests (p=0.001). The LOECs for cocoon hatching were 1 and 10mg/kg for MNX and TNX in soil, respectively, and 10mg/L in the topical test. Greater than 100mg/kg MNX and TNX completely inhibited cocoon hatching. In soil, the EC20 values for MNX were 8.7 and 8.8mg/kg for cocoon and juvenile production, respectively, compared to 9.2 and 9.1mg/kg for TNX, respectively. The EC20 values for the total number of cocoon hatchlings were 3.1 and 4.7mg/kg for MNX and TNX, respectively, in soil and 4.5 and 3.1mg/L in the topical test. Both MNX and TNX inhibited cocoon production and hatching, suggesting that they may have a negative affect on soil ecosystems at contaminated sites.     

A directional passive air sampler for monitoring polycyclic aromatic hydrocarbons (PAHs) in air mass

A passive air sampler was developed for collecting polycyclic aromatic hydrocarbons (PAHs) in air mass from various directions. The airflow velocity within the sampler was assessed for its responses to ambient wind speed and direction. The sampler was examined for trapped particles, evaluated quantitatively for influence of airflow velocity and temperature on PAH uptake, examined for PAH uptake kinetics, calibrated against active sampling, and finally tested in the field. The airflow volume passing the sampler was linearly proportional to ambient wind speed and sensitive to wind direction. The uptake rate for an individual PAH was a function of airflow velocity, temperature and the octanol-air partitioning coefficient of the PAH. For all PAHs with more than two rings, the passive sampler operated in a linear uptake phase for three weeks. Different PAH concentrations were obtained in air masses from different directions in the field test.     

A model for estimating the potential biomagnification of chemicals in a generic food web: Preliminary development

GOAL, SCOPE AND BACKGROUND: Bioaccumulation and biomagnification of organic pollutants have been increasingly assessed and modeled during the last years. Due to the complexity of these processes and the large variability of food webs, setting generic assessments for these parameters is really difficult. Equilibrium models, based on a compound's lipophylicity, are the main tool in regulatory proposals, such as for identifying Persistent, Bioaccumulative and Toxic Substances (PBTs), although a refinement has been claimed by the scientific community. Toxicokinetic studies offer an alternative for these estimations, where biomagnification is modeled as a succession of bioaccumulation processes, each one regulated by toxicokinetic parameters. METHODS: A review of kinetic models covering species belonging to different trophic levels and with different ecological behavior has been conducted. The results were employed for setting a conceptual model for estimating the biomagnification potential in a generic food web, which was mathematically implemented through system dynamic models developed under data sheet software. Crystal Ball was then employed for allowing Monte Carlo based probabilistic calculations. Bioaccumulation laboratory assays have been performed to estimate toxicokinetic parameters in mussels (Mytilus edulis) with two PAHs (chrysene and benzo[a]pyrene). The contamination was delivered via food. The exposure period lasted more than one month followed then by a depuration phase. The contaminant content was determined on an individual basis on five replicates. RESULTS AND DISCUSSION:. The reviewed information suggested the development of a tiered conceptual biomagnification model, starting with a simplified food chain which can be refined to more realistic and complex models in successive levels. CONCLUSIONS: The mathematical implementation of the conceptual model offers tools for estimating the potential for bioaccumulation and biomagnification of chemicals under very different conditions. The versatility of the model can be used for both comparative estimations and for validating the model. RECOMMENDATIONS AND PERSPECTIVES: Since bioaccumulation and biomagnification processes are crucial elements for a proper risk assessment of chemicals, their estimation by mathematical models has been widely tested. However, inregulatory assessments, too simplistic models are still being used quite often. The biomagnification model presented in this study should be amore accurate alternative to these models. In comparison to other previously published biomagnification models, the present one covers the time variation of bioaccumulation using just a few toxicokinetic parameters.     

Lethal and sublethal effects of the pyrethroid, bifenthrin, on grass shrimp (Palaemonetes pugio) and sheepshead minnow (Cyprinodon variegatus)

This study investigated the lethal and sublethal effects of the pyrethroid insecticide bifenthrin on adult and larval grass shrimp, Palaemonetes pugio, and adult sheepshead minnows, Cyprinodon variegatus. The effects were determined by conducting 96-h aqueous static renewal tests and 24-h static tests with sediment. Oxidative stress biomarkers, lipid peroxidation, glutathione, and catalase were also assessed. The 96-h aqueous LC50 value for adult shrimp was 0.020 microg/L (95% CI: 0.015-0.025 microg/L) and for larval shrimp was 0.013 microg/L (95% CI: 0.011-0.016 microg/L). The 96-h aqueous LC50 for adult sheepshead minnow was 19.806 microg/L (95% CI: 11.886-47.250 microg/L). The 24-h sediment LC50 for adult shrimp was 0.339 microg/L (95% CI: 0.291-0.381 microg/L) and for larval shrimp was 0.210 microg/L (95% CI: 0.096-0.393 microg/L). The oxidative stress assays showed some increasing trends toward physiological stress with increased bifenthrin concentrations but they were largely inconclusive. Given the sensitivity of grass shrimp to this compound in laboratory bioassays, additional work will be needed to determine if these exposure levels are environmentally relevant.     

Photochemical degradation of methylparathion in the presence of humic acid

Photochemical degradation of methylparathion (O,O,-dimethyl O-4 nitrophenylphosphorothioate) in the presence of humic acid between pH 2 and 7 was monitored by differential pulse polarography. Humic acid was not electro-active under the experimental conditions used in this study. Only the pesticide and its main degradation product at pH 2 exhibited polarographic signals. Photolysis of methylparathion in acid media was sensitized by humic acid since the pesticide did not degrade in the absence of this compound. Methylparathion degradation in the presence of humic acid was observed at each of the studied pHs. The reaction was first-order with rate constant values ranging from 2 x 10(-3) to 6.3 x 10(-3) min(-1).     

Characterizing ammonia emissions from swine farms in eastern North Carolina: part 1--conventional lagoon and spray technology for waste treatment

Ammonia (NH3) fluxes from waste treatment lagoons and barns at two conventional swine farms in eastern North Carolina were measured. The waste treatment lagoon data were analyzed to elucidate the temporal (seasonal and diurnal) variability and to derive regression relationships between NH3 flux and lagoon temperature, pH and ammonium content of the lagoon, and the most relevant meteorological parameters. NH3 fluxes were measured at various sampling locations on the lagoons by a flowthrough dynamic chamber system interfaced to an environmentally controlled mobile laboratory. Two sets of open-path Fourier transform infrared (FTIR) spectrometers were also used to measure NH3 concentrations for estimating NH3 emissions from the animal housing units (barns) at the lagoon and spray technology (LST) sites. Two different types of ventilation systems were used at the two farms. Moore farm used fan ventilation, and Stokes farm used natural ventilation. The early fall and winter season intensive measurement campaigns were conducted during September 9 to October 11, 2002 (lagoon temperature ranged from 21.2 to 33.6 degrees C) and January 6 to February 2, 2003 (lagoon temperature ranged from 1.7 to 12 degrees C), respectively. Significant differences in seasonal NH3 fluxes from the waste treatment lagoons were found at both farms. Typical diurnal variation of NH3 flux with its maximum value in the afternoon was observed during both experimental periods. Exponentially increasing flux with increasing surface lagoon temperature was observed, and a linear regression relationship between logarithm of NH3 flux and lagoon surface temperature (T1) was obtained. Correlations between lagoon NH3 flux and chemical parameters, such as pH, total Kjeldahl nitrogen (TKN), and total ammoniacal nitrogen (TAN) were found to be statistically insignificant or weak. In addition to lagoon surface temperature, the difference (D) between air temperature and the lagoon surface temperature was also found to influence the NH3 flux, especially when D > 0 (i.e., air hotter than lagoon). This hot-air effect is included in the statistical-observational model obtained in this study, which was used further in the companion study (Part II), to compare the emissions from potential environmental superior technologies to evaluate the effectiveness of each technology.     

Trends in snowpack chemistry and comparison to National Atmospheric Deposition Program results for the Rocky Mountains, US, 1993–2004

Seasonal snowpack chemistry data from the Rocky Mountain region of the US was examined to identify long-term trends in concentration and chemical deposition in snow and in snow-water equivalent. For the period 1993–2004, comparisons of trends were made between 54 Rocky Mountain Snowpack sites and 16 National Atmospheric Deposition Program wetfall sites located nearby in the region. The region was divided into three subregions: Northern, Central, and Southern. A non-parametric correlation method known as the Regional Kendall Test was used. This technique collectively computed the slope, direction, and probability of trend for several sites at once in each of the Northern, Central, and Southern Rockies subregions. Seasonal Kendall tests were used to evaluate trends at individual sites.Significant trends occurred during the period in wetfall and snowpack concentrations and deposition, and in precipitation. For the comparison, trends in concentrations of ammonium, nitrate, and sulfate for the two networks were in fair agreement. In several cases, increases in ammonium and nitrate concentrations, and decreases in sulfate concentrations for both wetfall and snowpack were consistent in the three subregions. However, deposition patterns between wetfall and snowpack more often were opposite, particularly for ammonium and nitrate. Decreases in ammonium and nitrate deposition in wetfall in the central and southern rockies subregions mostly were moderately significant (p<0.11) in constrast to highly significant increases in snowpack (p<0.02). These opposite trends likely are explained by different rates of declining precipitation during the recent drought (1999–2004) and increasing concentration. Furthermore, dry deposition was an important factor in total deposition of nitrogen in the region. Sulfate deposition decreased with moderate to high significance in all three subregions in both wetfall and snowpack. Precipitation trends consistently were downward and significant for wetfall, snowpack, and snow-telemetry data for the central and southern rockies subregions (p<0.03), while no trends were noted for the Northern Rockies subregion.     

Footprints on ammonia concentrations from environmental regulations

Releases of ammonia (NH3) to the atmosphere contribute significantly to the deposition of nitrogen to both terrestrial and aquatic ecosystems. This is the background for the national NH3 emission ceilings in Europe. However, in some countries the national legislation aims not only to meet these ceilings but also to reduce the atmospheric nitrogen deposition to local ecosystems. Such measures to reduce the load of nitrogen to local ecosystems were introduced in Denmark in 1994. In this paper we demonstrate that this regulation is reflected in the NH3 concentrations in Denmark. The Danish legislation forces farmers to applying manure to the fields during the crop-growing season. We have analyzed the seasonal variation in local NH3 concentrations over the time period of 1989-2003. During this period the seasonal variation has changed from having moderate spring and autumn concentration peaks to having a single and much more pronounced spring peak. In the analysis we apply an NH3 emission model to demonstrate that these changes in the seasonal variation are a result of the changes in the Danish legislation. The analysis demonstrates the strength of using a high-resolution emission model in the analysis of routine monitoring data.     

Coupled infrared extinction spectra and size distribution measurements for several non-clay components of mineral dust aerosol (quartz, calcite, and dolomite)

Simultaneous size distributions and Fourier transform infrared (FTIR) extinction spectra have been measured for several representative components of mineral dust aerosol (quartz, calcite, and dolomite) in the fine particle size mode (D=0.1–1 μm). Optical constants drawn from the published literature have been used in combination with the experimentally determined size distributions to simulate the extinction spectra. In general, Mie theory does not accurately reproduce the peak position or band shape for the prominent IR resonance features in the 800–1600 cm⁻¹ spectral range. The resonance peaks in the Mie simulation are consistently blue shifted relative to the experimental spectra by 20–50 cm⁻¹. Spectral simulations, derived from a simple Rayleigh-based analytic theory for a “continuous distribution of ellipsoids” particle shape model, better reproduce the experimental spectra, despite the fact that the Rayleigh approximation is not strictly satisfied in these experiments. These results differ from our previous studies of particle shape effects in silicate clay mineral dust aerosols where a disk-shaped model for the particles was found to be more appropriate.     

Implementation of a windblown dust parameterization into MODELS-3/CMAQ: Application to episodic PM events in the US/Mexico border

Windblown dust is known to impede visibility, deteriorate air quality and modify the radiation budget. Arid and semiarid areas with unpaved and unvegetated land cover are particularly prone to windblown dust, which is often attributed to high particulate matter (PM) pollution in such areas. Yet, windblown dust is poorly represented in existing regulatory air quality models. In a study by the authors on modeling episodic high PM events along the US/Mexico border using the state-of-the-art CMAQ/MM5/SMOKE air quality modeling system [Choi, Y.-J., Hyde, P., Fernando, H.J.S., 2006. Modeling of episodic particulate matter events using a 3D air quality model with fine grid: applications to a pair of cities in the US/Mexico border. Atmospheric Environment 40, 5181–5201], some of the observed PM₁₀ NAAQS exceedances were inferred as due to windblown dust, but the modeling system was incapable of dealing with time-dependent episodic dust entrainment during high wind periods. In this paper, a time-dependent entrainment parameterization for windblown dust is implemented in the CMAQ/MM5/SMOKE modeling system with the hope of improving PM predictions. An approach for realizing windblown dust emission flux for each grid cell over the study domain on an hourly basis, which accounts for the influence of factors such as soil moisture content, atmospheric stability and wind speed, is presented in detail. Comparison of model predictions with observational data taken at a pair of US/Mexico border towns shows a clear improvement of model performance upon implementation of the dust emission flux parameterization.