Effects of fly ash addition on physical properties of porous clay-fly ash composites via polymeric replica technique

The porous composites of clay and fly ash have the potential to be used in many fields, such as catalyst support and gas adsorbents. In this study, various ratios of fly ash (1–2) with different percentage of suspension (50–70 wt%) were applied to produce porous clay-fly ash composites via polymeric replica technique. Fabrication process starts by mixing clay and fly ash in distilled water to form slurry. The process is followed by fully immersing polymer sponge in slurry. The excess slurry is then removed through squeezing. Finally, the sponge coated with slurry is sintered at 500 and 1250 °C for 1 h. It is found that the compressive strength of porous composites improves significantly (0.178–1.28 MPa) when the amount of clay-fly ash suspension mixture (50–70 wt%) increases. The compressive strength of porous composites is mainly attributed to the mullite, quartz and amorphous phase formations. These results are supported by X-ray diffraction analysis. On the other hand, increase in the amount of suspension reduces the apparent density (from 2.44 to 2.32 g/cm³) and porosity (from 97 to 85 %). The reduction in apparent density is believed to be caused by the presence of high fly ash content in porous composites. The melted fly ash cenospheres have closed the internal pores and increased density of samples. Higher suspension level not only reduces porosity, but also increases close pores of the porous composites. The results are justified through the observation from the structures of porous clay-fly ash composites.     

Contaminant mass flux and forensic assessment of polycyclic aromatic hydrocarbons: Tools to inform remediation decision making at a contaminated site in Canada

Polycyclic aromatic hydrocarbons (PAHs) and metal(loid) mass flux estimates and forensic assessment using PAH diagnostic ratios were used to inform remediation decision making at the Sydney Tar Ponds (STPs) and Coke Ovens cleanup project in eastern Canada. Environmental effects monitoring of surface marine sediments in Sydney Harbor indicated significantly higher PAH concentrations during the first year of remediation monitoring compared to baseline. This was equivalent to PAH loadings of ～2,000 kg over a 15‐month period. Increases in sediment PAH concentrations raised serious concerns for regulators, who requested cessation of remediation activities early in the $400 M (CAD) project. Historically, the STPs were reported as the primary source of PAH contamination in Sydney Harbor with estimated discharges of 300 to 800 kg/year between 1989 and 2001. Mass flux estimates of PAHs and metal(loid)s and PAH diagnostic ratios were used to evaluate if increases in PAH concentrations in marine sediments were the result of the STPs remediation activities. PAH mass flux estimates approximated that 17 to 97 kg/year were discharged from the STPs during three years of remediation and were corroborated by an independent PAH flux estimate of 119 kg in year 1. PAH fluxes to the Sydney Harbor were mostly surface water derived, with groundwater contributing negligible quantities (0.002–0.005 kg/year). Fluxes of metal(loid)s to harbor sediments were stable or declining across all years and were mirrored in sediment metal(loid) concentrations, which lacked temporal variation, unlike total PAH concentrations. Flux results were also corroborated using PAH diagnostic ratios, which found a common source of PAHs. Coal combustion was likely the principal source of PAHs and not migration from the STPs during remediation. Although short‐term residual sediment PAH increases during onset of remediation raised concerns for regulators, calls for premature cessation of remediation early in the project were unwarranted based on only one year of monitoring data. Mass flux estimates and forensic assessments using PAH diagnostic ratios proved useful tools to inform remediation decision making that helped environmental protection and reduced costs associated with lost cleanup time.     

Healthcare waste management: current practices in selected healthcare facilities, Botswana

Healthcare waste management continues to present an array of challenges for developing countries, and Botswana is no exception. The possible impact of healthcare waste on public health and the environment has received a lot of attention such that Waste Management dedicated a special issue to the management of healthcare waste (Healthcare Wastes Management, 2005. Waste Management 25(6) 567-665). As the demand for more healthcare facilities increases, there is also an increase on waste generation from these facilities. This situation requires an organised system of healthcare waste management to curb public health risks as well as occupational hazards among healthcare workers as a result of poor waste management. This paper reviews current waste management practices at the healthcare facility level and proposes possible options for improvement in Botswana.     

Best Available Treatment Technologies Applied to Groundwater Circulation Wells

Groundwater circulation wells (GCWs) are a quasi‐in‐situ method for remediating groundwater in areas where remediation techniques that limit the water available for municipal, domestic, industrial, or agricultural purposes are inappropriate. The inherently resource‐conservative nature of groundwater circulation wells is also philosophically appealing in today's culture, which is supportive of green technologies. Groundwater circulation wells involve the circulation of groundwater through a dual‐screen well, with treatment occurring between the screens. The wells are specifically designed so that one well screen draws in groundwater and the second returns the groundwater after it has been treated within the well. Historically, the treatment has been performed with specialized equipment proprietary to GCW vendors. Two full‐scale pilot systems at a formerly used Defense Superfund site in Nebraska used best available technologies for treatment components. A multiple‐tray, low‐profile air stripper typically used for pump‐and‐treat remediation systems was successfully adapted for the GCW pilot system located in a trichloroethylene (TCE) hot spot. An ultraviolet water disinfection system was successfully adapted for the GCW pilot system located in a hot spot contaminated with the explosive compound hexhydro‐1,3,5‐trinitro‐1,3,5‐triazine (RDX). The pilot systems showed that GCW technology is competitive with a previously considered pump‐and‐treat alternative for focused extraction, and the regulatory community was supportive of additional GCW applications. A remedial design for the site includes 12 more GCW systems to complete focused remediation requirements. © 2002 Wiley Periodicals, Inc.     

The influence of degree of substitution on blend miscibility and biodegradation of cellulose acetate blends

In this account, we report our findings on blends of cellulose acetate having a degree of substitution (DS) of 2.49 (CA2.5) with a cellulose acetate having a DS of 2.06 (CA2.0). This blend system was examined over the composition range of 0–100% CA2.0 employing both solvent casting of films (no plasticizer) and thermal processing (melt-compressed films and injection molding) using poly(ethylene glycol) as a common plasticizer. All thermally processed blends were optically clear and showed no loss in optical quality after storage for several months. Thermal analysis and measurement of physical properties indicate that blends in the middle composition range are partially miscible, while those at the ends of the composition range are miscible. We suggest that the miscibility of these cellulose acetate blends is influenced primarily by the monomer composition of the copolymers. Bench-scale simulated municipal composting confirmed the biodestructability of these blends and indicated that incorporation of a plasticizer accelerated the composting rates of the blends.In vitro aerobic biodegradation testing involving radiochemical labeling conclusively demonstrated that both the lower DS CA2.0 and the plasticizer significantly enhanced the biodegradation of the more highly substituted CA2.5.While this work was in progress, Robert Gardner was struck with cancer and died on June 6, 1995. This paper is dedicated to his memory and to his contributions as a friend and colleague.     

Considerations for Manufacturing Bio-Based Plastic Products

One engine that drives the United States’ economic growth is an ever-increasing demand for manufactured products, both at home and abroad. This increase has created a major concern for the environment in terms of disposing used goods and ensuring that these products are safe. As environmental concerns grow, however, renewable resources are gaining increasing attention, especially as industrial ecology and product biodegradability gain importance. Added to this, biological materials are increasingly being utilized to replace traditional materials in manufacturing. To aid both educators as well as researchers, this paper examines several considerations that are essential for manufacturing plastic products that contain biomaterials. These include the selection of materials, the selection of manufacturing processes, manufacturing costs, and the quality of final products. Additionally, several standard methods that are commonly used for the determination of mechanical and physical properties are compiled; thus this paper should be a useful resource for both educators and researchers. The trends discussed here and their implications are critical for those involved in manufacturing, because contrary to conventional wisdom, simultaneously meeting the material production needs of our society, as well as that of the environment are not mutually-exclusive.     

The ability of a benthic elasmobranch to discriminate between biological and artificial electric fields

To investigate the ability of elasmobranchs to distinguish between differing prey-type electric fields we examined the electroreceptive foraging behaviour of a model species, Scyliorhinus canicula (small-spotted catshark). Catshark preferences were studied by behaviourally conditioning them to swim through narrow tunnels, and on exit presenting them simultaneously with two different electric fields. Their subsequent choices of the following paired options were recorded; (i) Two artificial electric fields (dipole electrodes) with different magnitude direct current (D.C.), (ii) Two artificial electric fields, one D.C. and the other alternating current (A.C.), of the same magnitude, and (iii) similar magnitude, natural and artificial D.C. electric fields associated with shore crabs and dipole electrodes respectively. We found a highly significant preference for the stronger D.C. electric field and a less pronounced, but still significant, preference for the A.C. electric field rather than the D.C. electric field. No preference was demonstrated between the artificial and natural D.C. electric fields. The findings are discussed in relation to the animal’s diet and ecology and with regard to anthropogenic sources of electric fields within their habitat.     

Linking predator and prey behaviour: contrasts between Antarctic fur seals and macaroni penguins at South Georgia

Antarctic fur seals Arctocephalus gazella and macaroni penguins Eudyptes chrysolophus are the two main land-based krill Euphausia superba consumers in the northern Scotia Sea. Using a combination of concurrent at-sea (predator observations, net hauls and multi-frequency acoustics), and land-based (animal tracking and diet analysis) techniques, we examined variability in the foraging ecology of these sympatric top predators during the austral summer and autumn of 2004. Krill availability derived from acoustic surveys was low during summer, increasing in autumn. During the breeding season, krill occurred in 80% of fur seal diet samples, with fish remains in 37% of samples. Penguin diets contained the highest proportion of fish in over 20 years of routine monitoring (46% by mass; particularly the myctophid Electrona antarctica), with krill (33%) and amphipods (Themisto gaudichaudii; 21%) also occurring. When constrained by the need to return and feed their offspring both predator species foraged to the northwest of South Georgia, consistent with an area of high macrozooplankton biomass, but fur seals were apparently more successful at exploiting krill. When unconstrained by chick-rearing (during March) penguins foraged close to the Shag Rocks shelf-break, probably exploiting the high daytime biomass of fish in this area. Penguins and seals are able to respond differently to periods of reduced krill abundance (in terms of variability in diet and foraging behaviour), without detriment to the breeding success of either species. This highlights the importance of myctophid fish as an alternative trophic pathway for land-based predators in the Scotia Sea ecosystem.     

湛江特呈岛红树林植物群落的结构和动态特征

对特呈岛红树林植被进行多次和全面的调查,通过采用格子样的方法,选取面积为100～800 m^2的样地,每片样地再分成若干10 m×10 m的样方,对红树林样地内的植物进行每木测量,记录各植物的种名、胸径、高度、冠幅等,并进行重要性以及多样性等常规的群落分析,判定该地区植被的生长特征以及研究其演替动态变化。结果表明：①面积较大的群落主要有3个类型,即白骨壤群落（Avicennia marina）、白骨壤＋红海榄群落（Avicennia marina＋Rhizophora stylosa）、白骨壤-桐花树群落（Avicennia marina-Aegiceras corniculatum）;其它面积较小的群落有：白骨壤＋红海榄-木榄＋桐花树群落（vicennia marina＋Rhizophora stylosa-Bruguiera gymnorrhiza＋Aegiceras corniculatum）、红海榄＋木榄群落（Rhizophora stylosa＋Bru-guiera gymnorrhiza）;②在3个主要群落中,优势种的苗木和小树相对较少,优势种群的年龄结构均为衰退型;③各群落的Simpson指数关系为：白骨壤＋红海榄群落﹥红海榄＋木榄群落﹥白骨壤＋红海榄—木榄＋桐花树群落﹥白骨壤—桐花树群落﹥白骨壤群落;白骨壤群落的重要值为300,为典型的单优群落;④特呈岛的白骨壤群落是中国该类群落中面积最大的,目前长势良好,无病虫害,并且红树林外缘的白骨壤枝干在波浪冲刷或人为原因下,受到较严重的侵蚀,其幼树在林外缘基本无法存活,需要加强保护,对其生理生态学特征也值得进一步深入研究。