Biochemical composition of sedimentary organic matter in the coral reefs of Lakshadweep Archipelago,Indian Ocean

Surface sediments were collected from the shore and lagoons of Kavaratti, Kadamat Agatti and Pitti islands of Lakshadweep Archipelago during May 2015 and analysed for biochemical composition and quality of organic matter. The biochemical composition of sedimentary organic matter from the entire study area was characterised by the dominance of carbohydrates (CHO) followed by proteins (PRT) and finally lipids (LPD). PRT:CHO ratios were less than 1 and indicated the presence of aged organic matter in the islands. The poor nutritional quality of sediments to support benthic fauna was evident from the values of LPD:CHO ratios. The refractory nature of sediments and less availability of food to benthic source was supported by BPC:TOC ratios. Based on estimated ratios and biopolymeric carbon values, the trophic status of the study area was categorised as oligotrophic.     

Illinois State Water Survey Bulletin 75: New Precipitation Frequency Study for Illinois

Storm frequency estimates and their temporal distributions are important in determining estimates of runoff or peak flow rates in many engineering and hydrological problems. Illinois State Water Survey Bulletin 70 has been serving as the design rainfall standard in Illinois since its publication in 1989. Although Bulletin 70 represented the best available data at the time of its publication, the standards needed to be reevaluated and updated after more than three decades and with the growing evidence of the nonstationary nature of heavy precipitation. The trends in heavy precipitation in Illinois prompted the creation of a new frequency study named Bulletin 75, providing precipitation frequencies for event durations ranging from 5 min to 10 days and for recurrence intervals ranging from 2 months to 500 years. The results are presented for the same 10 geographic sections in Illinois as in Bulletin 70 to maintain the continuity of hydrologic studies and compatibility with regulations. The primary goal of this paper is to outline some of the key methodological issues and challenges, to compare the results with the previous sources, and to highlight the effects of the changing precipitation standards on the development of amendments to existing ordinances. Lake County in Illinois, as one of the most affected urban areas with the highest change in heavy precipitation, was selected to illustrate issues related to the application of modified precipitation standards.     

Speciation and sources of atmospheric aerosols in a highly industrialised emerging mega-city in central China

Monitoring air quality in large urban agglomerations is the key to the prevention of air pollution-related problems in emerging mega-cities. The city of Wuhan is a highly industrialised city with >9 million inhabitants in Central China. Simultaneous PM10 sampling was performed during 1 year at one urban and one industrial site. Mean PM10 daily levels (156 microg m(-3) at the urban site and 197 microg m(-3) at the industrial hotspot) exceed the US-EPA or EU annual limit values by 3-4 times. A detailed study of daily speciation showed that the mean chemical composition of PM10 presents minimal differences between peak and low PM episodes. This implies that PM10 aerosols in the study area result from local emissions, and air quality management and abatement strategies in Wuhan should thus focus on local anthropogenic sources. The levels of some elements of environmental concern are relatively high (409-615 ngPb m(-3), 66-70 ngAs m(-3), 116-227 ngMn m(-3), 10-12 ngCd m(-3)) due to industrial, but also urban emissions. Principal component analysis identified a mineral source (probably cement and steel manufacture) and smelting as the main contributors to PM10 levels at the industrial site (34%), followed by a coal fired power plant (20%) and the anthropogenic regional background (16%). At the urban site the major PM10 source is a mixed coal combustion source (31%), followed by the anthropogenic regional background (28%) and traffic (16%).     

Trends in seasonal precipitation and temperature in Slovenia during 1951–2007

A quality-controlled and enhanced database of 38 temperature and 52 precipitation stations was developed for Slovenia, a transitional area between Mediterranean, Alpine and continental climatic regimes, covering the period 1951–2007. Mean annual temperatures significantly increased in nearly all of Slovenia (except western areas) at rates between 0.15 and 0.36 °C/decade. Warming was most intense strongest in summer and spring in north-eastern Slovenia (0.3–0.4 °C/decade) and weakest in autumn. Precipitation trends were heterogeneous. Annual precipitation decreased significantly in the north-western part, at 3–6 % per decade. During spring and summer, decrease in rainfall by 3–6 % was detected in western Slovenia. No significant trends were found for the autumn season. In winter, precipitation decreased, by 3–12 % per decade, in particular in north-western Slovenia. As observed also elsewhere in Central Europe, changes in large-scale atmospheric circulation patterns may have contributed to the observed long-term warming and drying in Slovenia. However, the strong warming in summer and spring, that is almost twice the trend observed in neighbouring countries, could be enhanced by drier soils caused by the decrease in winter precipitation in Slovenia.     

Artisanal and small-scale gold mining in Burkina Faso: Suggestion of multi-agent methodology as a complementary support in elaborating a policy

In order to better manage artisanal and small-scale gold mining, the Burkinabe authorities have planned to build a suitable methodological support as an aid to elaborating appropriate policies and actions. The developed methodology concerns (a) at a spatial level, the generation and analysis of a geological resources map needed by the artisanal miners and (b) at a socioeconomic level, analysis of the miners' activity. This paper reports and discusses the results of our suggestion to also introduce the use of an approach known as multi-agent system (MAS) as a complementary part of this initial methodology, at a downstage level to the above two analysis stages. MAS methodology could be used to develop simulation models to forecast the future of the activity. MAS is appropriate for describing the dynamics of systems where it is impossible to obtain all output data of a model from a purely mathematical or statistical transformation of input data. Our suggestion involves (i) demonstrating the capacity of the approach to simulate all parameters needed by mining policy makers and (ii) evaluating to what extent the methodology is accepted by them, as well as, at a more scientific level, the literature regarding mining system simulation.     

Diversity and community structure of culturable arsenic-resistant bacteria across a soil arsenic gradient at an abandoned tungsten-tin mining area

We studied the bacterial diversity at a single location (the Terrubias mine; Salamanca province, Spain) with a gradient of soil As contamination to test if increasing levels of As would (1) change the preponderant groups of arsenic-resistant bacteria and (2) increase the tolerance thresholds to arsenite [As(III)] and arsenate [As(V)] of such bacteria. We studied the genetic and taxonomic diversity of culturable arsenic-resistant bacteria by PCR fingerprinting techniques and 16S rRNA gene sequencing. Then, the tolerance thresholds to As(III) and As(V) were determined for representative strains and mathematically analyzed to determine relationships between tolerances to As(III) and As(V), as well as these tolerances with the soil contamination level. The diversity of the bacterial community was, as expected, inversely related to the soil As content. The overall preponderant arsenic-resistant bacteria were Firmicutes (mainly Bacillus spp.) followed by γ-Proteobacteria (mainly Pseudomonas spp.), with increasing relative frequencies of the former as the soil arsenic concentration increased. Moreover, a strain of the species Rahnella aquatilis (γ-Proteobacteria class) exhibited strong endurance to arsenic, being described for the first time in literature such a phenotype within this bacterial species. Tolerances of the isolates to As(III) and As(V) were correlated but not with their origin (soil contamination level). Most of the strains (64%) showed relatively low tolerances to As(III) and As(V), but the second most numerous group of isolates (19%) showed increased tolerance to As(III) rather than to As(V), even though the As(V) anion is the prevalent arsenic species in soil solution at this location. To our knowledge, this is the first study to report a shift towards preponderance of Gram-positive bacteria (Firmicutes) related to high concentrations of soil arsenic. It was also shown that, under aerobic conditions, strains with relatively enhanced tolerance to As(III) predominated over the most As(V)-tolerant ones.     

Inorganic nanoparticles enhance the production of reactive oxygen species (ROS) during the autoxidation of L-3,4-dihydroxyphenylalanine (L-dopa)

Public concerns over the toxicity of nanoparticles (NPs) are growing due to the rapid development of nanotechnology. An important mechanism of nanotoxicity is oxidative stress resulting from reactive oxygen species (ROS). In this study, the chemical production of ROS by inorganic NPs oxidizing the mammalian phenolic compound, l-3,4-dihydroxyphenylalanine (l-dopa) was evaluated using a ROS sensitive dye, 2′,7′-diclorodihydrofluorescin (DCFH). CeO₂, Fe₂O₃ and Fe⁰ NPs enhanced ROS production during the autoxidation of l-dopa by more than four-fold in reactions that were dependent on O₂. This is the first report of chemical ROS production due to interaction of phenolic compounds with NPs. Mn₂O₃ oxidized DCFH in a reaction that did not require O₂ or l-dopa, suggesting a direct redox reaction between the Mn₂O₃ and the dye. CeO₂, Mn₂O₃ and to a lesser extent Fe⁰ formed clear electron paramagnetic resonance (EPR) signature for hydroxyl radicals when incubated in aerobic aqueous suspensions with spin traps. The results indicate that NPs can generate ROS via chemical reactions with medium components and biomolecules susceptible to oxidation, such as l-dopa. NPs were reactive whereas micron-sized particles were not. The combined assay with l-dopa and DCFH is a method proposed to screen for chemical ROS production by NPs.     

Development of monoclonal antibody-based immunoassays for the analysis of bisphenol A in canned vegetables

The aim of this work was the development of monoclonal antibodies (MAbs) and highly sensitive immunoassays (ELISAs) to bisphenol A (BPA), a well-known endocrine disruptor able to migrate from the internal coating of cans to food contained inside, particularly vegetables. To produce MAbs to BPA, four synthetic compounds were conjugated to proteins and used as immunizing haptens in mice. By applying hybridoma technology, several MAbs were produced and selected. These antibodies were characterized in the conjugate-coated and in the antibody-coated formats, using both homologous and heterologous conjugates. Three indirect ELISA based on the MAbs showing the highest affinity to BPA were selected. The limit of detection of the most sensitive ELISA was 0.22 nM (0.05 ng/mL), with an I?? value of around 1 nM (0.23 ng/mL). An homologous ELISA based on the MAb BPAB-11 was applied to the simple, direct determination of BPA in the liquid portion of canned artichoke, peas, and sweet corn. Only sample dilution in an appropriate saline buffer was required to minimize matrix effects and to enter the ELISA working range. Recovery and precision of the method were evaluated by spiking the liquid portion of these cans with BPA at 20, 50, and 100 ng/mL. Coefficients of variation were below 20% in most cases. With regard to recovery, the analytical data obtained were also acceptable. This immunoassay has therefore proved its potential as a new tool for the rapid, sensitive and accurate determination of BPA in canned food.     

Removal of imidazolium- and pyridinium-based ionic liquids by Fenton oxidation

The oxidation of imidazolium (1-hexyl-3-methylimidazolium chloride, HmimCl) and pyridinium (1-butyl-4-methylpyridinium chloride, BmpyrCl) ionic liquids (ILs) by Fenton’s reagent has been studied. Complete conversion was achieved for both ILs using the stoichiometric H₂O₂ dose at 70 °C, reaching final TOC conversion values around 45 and 55% for HmimCl and BmpyrCl, respectively. The decrease in hydrogen peroxide dose to substoichiometric concentrations (20–80% stoichiometric dose) caused a decrease in TOC conversion and COD removal and the appearance of hydroxylated oxidation by-products. Working at these substoichiometric H₂O₂ doses allowed the depiction of a possible degradation pathway for the oxidation of both imidazolium and pyridinium ILs. The first step of the oxidation process consisted in the hydroxylation of the ionic liquid by the attack of the ·OH radicals, followed by the ring-opening and the formation of short-chain organic acids, which could be partially oxidized up to CO₂ and H₂O. At H₂O₂ doses near stoichiometric values (80%), the resulting effluents showed non-ecotoxic behaviour and more biodegradable character (BOD₅/COD ratio around 0.38 and 0.58 for HmimCl and BmpyrCl, respectively) due to the formation of short-chain organic acids.

Open image in new window

Graphical abstract ?