含PVA印染废水的生化动力学研究及其应用

通过对含有聚乙烯醇(PVA)印染废水的生化降解动力学的研究,确定表征微生物生长繁殖、自身氧化等的动力学参数,以此作为生化处理工艺设计的重要依据,使之更符合废水的水质特点,从而提高处理效率;同时,通过掌握其处理过程的规律,为工艺管理、运行效果预测,提供比较明确的控制量。     

Hydrogen storage and distribution systems

Hydrogen storage and transportation or distribution is closely linked together. Hydrogen can be distributed continuously in pipelines or batch wise by ships, trucks, railway or airplanes. All batch transportation requires a storage system but also pipelines can be used as pressure storage system. Hydrogen exhibits the highest heating value per weight of all chemical fuels. Furthermore, hydrogen is regenerative and environment friendly. There are two reasons why hydrogen is not the major fuel of toady’s energy consumption: First of all, hydrogen is just an energy carrier. And, although it is the most abundant element in the universe, it has to be produced, since on earth it only occurs in the form of water. This implies that we have to pay for this energy, which results in a difficult economic task, because since the industrialization we are used to consuming energy for free. The second difficulty with hydrogen as an energy carrier is the low critical temperature of 33 K, i.e. hydrogen is a gas at room temperature. For mobile and in many cases also for stationary applications the volumetric and gravimetric density of hydrogen in a storage system is crucial. Hydrogen can be stored by six different methods and phenomena: high pressure gas cylinders (up to 800 bar), liquid hydrogen in cryogenic tanks (at 21 K), adsorbed hydrogen on materials with a large specific surface area (at T < 100 K), absorbed on interstitial sites in a host metal (at ambient pressure and temperature), chemically bond in covalent and ionic compounds (at ambient pressure), oxidation of reactive metals e.g. Li, Na, Mg, Al, Zn with water. These metals easily react with water to the corresponding hydroxide and liberate the hydrogen from the water. Finally, the metal hydroxides can be thermally reduced to the metals in a solar furnace.     

催化CODcr快速测法的精密度与准确度实验

化学需氧量标准分析方法测定时间长、操作繁琐。本实验采用CTL—BX3C型便携式COD快速测定仪能在20分钟获得COD数据，同时耗能低、省时省力、减少污染。催化CODcr快速法的精密度与准确度均能达到要求。     

九龙江流域畜禽养殖业的生态环境问题及防治对策探讨

根据2001年畜禽养殖业统计数据，分析了九龙江流域畜禽养殖污染的现状和趋势。通过计算农田畜禽粪便负荷量，并采用猪粪当量负荷及有效农田面积，考虑各地农田畜禽粪便有机肥可消纳量，对九龙江流域畜禽粪便负荷量和承受程度进行警报与分级，系统地阐述了畜牧业发展中产生的生态环境问题，从技术和管理角度，提出消减畜禽养殖污染、促进生态环境良性循环的对策和措施。     

小型污水处理工艺及其应用展望

小型沁水处理设施作为投资省见效快的方法对我国今后污水厂建设具有重要指导意义，需要给予更多的关注，文中探讨了小型污水处理工艺的类型及其应用，并对我国小型污水处理厂的建设谈了几点看法。     

上海潮滩表层沉积物重金属的分布特征

１９９８年７月、１１月和１９９９年１月、４月，对上海潮滩进行连续采样和预测的基础上，用原子吸收法测试了１１０个表层沉积物中的Ｃｕ、Ｐｂ、Ｚｎ、Ｃｒ和Ｃｄ的含量，结果表明：（１）上海潮滩表层沉积物重金属含量有如下顺序：Ｚｎ〉Ｃｕ〉Ｃｒ〉Ｐｂ》Ｃｄ。（２）在自然条件下，从高潮滩到中、低潮滩，沉积物重金属的含量递减。（３）不同的采样位置对沉积物重金属的含量有显著影响。（４）根据各采样点沉积物重金属的含理     

底泥中酸性挥发硫及同步浸提金属的测定

同步浸提金属与酸性挥发硫的比值在判断底泥重金属生物毒性方面有重要意义．描述了一套测定底泥酸性挥发硫和同步浸提金属的仪器装置和分析程序．从气体流速、反应时间、酸浓度、硫含量等方面研究了酸性挥发硫测定的最适反应条件．在此条件下酸性挥发硫的测定回收率可达９０％以上．该方法的最低检出限为００２μｍｏｌ／ｇ（干泥）．     

高岭土矿成因分类的氢氧同位素证据

本文论述了氢、氧同位素作为高岭土矿成因类型地球化学指标的意义.根据氢、氧同位素数据,我国浙闽沿海地区高岭土矿床主要可分为热液蚀变型和风化作用型两大类.其成矿溶液以大气降水为主.     

放射性核素在海水、底质及海洋生物间的转移--Ⅰ.核素进入海水后的初始状态

作者在建立的人工小生境中,研究了具有生态学意义的~(137)Cs、~(134)Cs、~(65)Zn、~(60)Co、~(59)Fe、~(54)Mn等核素在海水、底质及海洋生物间的转移规律.本文是该项研究的第一部分,研究悬浮物、底质对核素的富集和吸附,考察了核素进入海水后的初始状态.