Assessment of thermal stress adaptation by monitoring Hsp70 and MnSOD in the freshwater gastropod,Bellamya bengalensis (Lamark 1882)

Expression of the stress biomarkers 70-kDa heat shock proteins (Hsp70) and manganese superoxide dismutase (MnSOD) was measured as the molecular basis of adaptive response against increased experimental temperatures (32–40 °C for a span of 24–72 h) on the fresh water molluscan species, Bellamya bengalensis (Lamark 1882). The experimental snail specimens were collected during summer and winter seasons from two contrasting wetlands: an ecorestored (free from human interference) site (SI) and other experiencing anthropogenic stresses (SII). The mortality rate of the B. bengalensis and the immunoblotting of MnSOD and Hsp70 of their digestive glands were performed at regular intervals during the period of heat stress. The SI provided a lower stress environment based on physicochemical parameters such as pH, dissolved oxygen (DO), biological oxygen demand (BOD), chemical oxygen demand (COD), and alkalinity for the survival of test species, although both sites experienced mortality due to thermal stresses. The parity in protein expressions displayed a uniform mode of adaptive impact to temperature elevations in both field and laboratory exposure. The Hsp70 expression was minimal at lower thermal stress, but increased with a rise in temperature. It is very likely that higher Hsp70 levels are not directly related to survival or adaptation. In contrast, MnSOD levels appeared to be an indicator of adaptive responses vis-a-vis survival of the animals. So, the expression levels of a universal free radical scavenger like MnSOD are recognized as a potential biomarker in a bioindicator species like Bellamya.     

Study of transient behaviour of modified Soxhlet apparatus for extraction of a bio-fuel oil from Crotalaria juncea seed

Extraction of Crotalaria juncea (Sunn hemp) oil from its seeds is important to study because of its proven promising clean fuel characteristics. Soxhlet-based solvent extraction with some modification has been tried to extract the oil. In a fluid-solid mass transfer system, where, solids are present as packed bed, dynamic behavior of bed can be described in terms of concentration of solute in solids/solvent-time profile. Some of the well-known semi-empirical models of adsorption dynamics are modified and applied since leaching of oil is just the reverse of the phenomenon of adsorption in porous media. Modified Bohart-Adams model (non-linear), modified Bed Depth Service Time (BDST) (linear), and modified Thomas model (non-linear forms) are applied. It is found that these models fit to the experimental result reasonably well. Results suggest that higher bed height, with proper shape (annular) of the bed, having a higher solvent velocity will work best. Comparing the error values (SSE, SAE, and ARE) in the four cases, it is very clear that the modified BDST model is the most suitable. In the light of transient study it is established that the modified Soxhlet apparatus with cylindrical and annular beds, performs best while leaching Crotalaria juncea oil from their seeds.     

Complete degradation of butyl benzyl phthalate by a defined bacterial consortium: role of individual isolates in the assimilation pathway

Two bacterial strains, in consortium, were isolated by enrichment techniques from municipal waste-contaminated soil, which utilized butyl benzyl phthalate (BBP) as the sole carbon source. One of the isolates was identified as Arthrobacter sp. strain WY and the other one as Acinetobacter sp. strain FW based on the morphological, nutritional and biochemical characteristics and 16S rRNA sequence analysis. Various metabolites of BBP engendered by Arthrobacter sp. strain WY were isolated and identified by a combination of chromatographic and spectrophotometric analyses, which revealed a pathway involving monobutylphthalate (MBuP), monobenzyl phthalate (MBzP), phthalic acid and protocatechuic acid. The protocatechuic acid in turn was processed by ortho-cleavage dioxygenase to form beta-carboxy-cis,cis-muconate, ultimately leading to the TCA cycle. The Arthrobacter sp. strain WY could not utilize the hydrolyzed alcohols of BBP. On the other hand, the Acinetobacter sp. strain FW, which by itself could not utilize BBP as the sole carbon source, is capable of utilizing the hydrolyzed alcohols of BBP. Benzyl alcohol was found to be metabolized by the Acinetobacter sp. strain FW via benzaldehyde, benzoic acid and catechol. Catechol was further degraded by ortho-cleavage dioxygenase to cis,cis-muconic acid and subsequently to muconolactone leading to beta-ketoadipate pathway. Moreover, the Acinetobacter sp. strain FW metabolized 1-butanol through butyraldehyde and butyric acid leading to the tricarboxylic acid cycle via beta-oxidation pathway. This is the first report on the complete degradation of BBP by a defined consortium describing the role of its individual constituents in the BBP assimilation pathway.     

Municipal wastewater treatment using novel constructed soil filter system

The study gives a new approach for contaminant removal from municipal wastewater using constructed soil filter (CSF) and presents performance of two CSF units located in Mumbai, India. In this system, natural weathered rock is formulated which combines sedimentation, infiltration and biochemical processes to remove suspended solids and oxidisable organics and inorganics of the wastewater. Results show elevated dissolved oxygen (DO) levels, removal of COD (136-205 to 38-40 mg l(-1)) and BOD (80-125 to less than 12 mg l(-1)) suspended solids from 135-203 to 13-18 mg l(-1) and turbidity from 84-124 to 8-11 NTU, bacterial removal of 2.4-3.1 log order for Total coliform and Fecal coliform from site I which is almost 8 years old facility, and site II which is 3 years old. Estimated hydraulic retention time of 0.5-1.0 h, hydraulic loading of 0.036-0.047 m(3)m(-2)h(-1), no pretreatment, high DO levels in the effluent, no bio-sludge production, no mechanical aeration, low energy requirement (0.04 kW h m(-3)) and green aesthetic ambience are its unique features.     

An investigation into the energy use in relation to yield of rice (Oryza sativa) in Assam, India

Energy use scenario and resulting rice yield of 576 farms belonging to six agroclimatic zones of Assam, India were investigated. Input energy from eight distinct sources, viz., human, animal, diesel, commercial chemical fertilizer, farm yard manure (FYM), seed, pesticide chemical and machinery were determined on the basis of collected data and using standard procedure. Based on the power sources used and application of commercial chemical fertilizer, four categories of farms were delineated: (i) animal power without commercial fertilizer (APNF), (ii) animal power with commercial fertilizer (APF), (iii) mechanical power without commercial fertilizer (MPNF) and (iv) mechanical power with commercial fertilizer (MPF). The best-fit curve of energy versus yield indicated that use of commercial chemical fertilizer and mechanical power resulted in higher rice yield at higher level of input energy. Moreover, as the use of energy increased the yield increased up to maxima and then declined at higher levels of energy. This was observed in all four categories of farms with variation in yield–energy values. The average values of energy input (MJ ha⁻¹) and corresponding yield (kg ha⁻¹) for the APNF, APF, MPNF and MPF type of farms were (5220, 1980); (9050, 3170); (5100, 2360) and (8320, 3800), respectively. Renewable energy dominated the rice cultivation in Assam contributing more than 50% of the total input energy with the exception of MPF category of farm where share of renewable and non-renewable were found to be almost equal. Among the farm operations, tillage was the highest energy consuming operation followed by threshing, harvesting and transplanting for all four categories of farms. However, it was observed that rice yield was not positively correlated with tillage energy.     

Immobilisation of manganese,cobalt and nickel by deep-sea-sediment microbial communities

Box core samples BC26 and BC36 from geologically different settings were examined to test the hypothesis that autochthonous microbial communities from polymetallic-nodule-rich Central Indian Basin sediments actively participate in immobilising metal ions. The bottom water dissolved oxygen concentration was reported to be 4.2–4.3 mL·L^?1 in the northern siliceous ooze (BC26) and 4.1–4.2 mL·L^?1 in the southern pelagic red clay (BC36); the sedimentation rates for these regions were 0.834 and 0.041 cm·kyr^?1, respectively. An onboard experiment, conducted under oxic and sub-oxic conditions with 100 μmol of Mn, Co and Ni, showed that microbial immobilisation under sub-oxic conditions was higher than in azide-treated controls in BC26 for Mn, Co and Ni at 30, 2 and 4 cm below sea floor (bsf), respectively, after 45 days. The trend in immobilisation was BC 26>BC 36, Co>Mn>Ni under oxic conditions and Mn>Co>Ni under sub-oxic conditions. The depth of maximum immobilisation for Co in BC26 under sub-oxic conditions coincided with the yield of cultured Co-tolerant bacteria and Ni only with organic carbon at 4 cm bsf. This study demonstrates that the organic carbon content and bioavailable metal concentrations in sediments regulate microbial participation in metal immobilisation.     

Chemical oxidation of C. I. Reactive Red 2 using Fenton-like reactions

A detailed investigation on the kinetics of the oxidative degradation of a reactive dye, C. I. Reactive Red 2 by hydroxyl radicals generated by H202 and Fe2+ has been carried out in aqueous acidic media. Effects of different parameters like initial concentration of dye, H2O2, Fe2+, pH of the solution, reaction temperature and added electrolytes on the oxidation process have been studied. The results indicate that 1.63 x 10(-4) mol dm(-3) dye can be most effectively degraded at a dye: Fe2+: H2O2 molar ratio of 1:0.22: 8.13 at pH approximately 2.7 and at 299 K. The addition of excess 2-propanol or t-butyl alcohol, well known scavengers of hydroxyl radicals, almost stopped the degradation of the dye indicating the absence of any possible reductive pathways in the degradation. The results may be useful for designing the treatment systems of wastewater containing various reactive dyes.     

Assessment of heavy metal status and identification of source in soils under intensive vegetable growing areas of Brahmaputra valley,North East India

Environmental Monitoring and Assessment - Evaporation is an important meteorological variable that has a great impact on water resources. In the current research, climatology data, and seasonal...     

Suppression of inhibition of substrate photodegradation by scavengers of hydroxyl radicals: the solvent-cage effect of bromide on nitrate photolysis

In this paper we show that bromide scavenges the ^·OH radicals formed upon photolysis of nitrate, before they leave the solvent cage. Bromide can thus inhibit the in-cage recombination between ^·OH and ^·NO₂. The consequence is an increased generation of ^·NO₂ and nitrite and of Br₂ ^?· + ^·OH, compared to ^·OH alone in the absence of bromide. We show that this effect compensates for the lower reactivity of Br ₂ ^?· compared to ^·OH toward certain organic substrates, e.g. phenol and tryptophan. Our findings could lead to a deep revision of the present views of the role of bromide in saltwater photochemistry.     

Heterogeneous photocatalysis for removal of microbes from water

Increasing water pollution by microbes has become a source of serious health concern across the globe. Production of potentially carcinogenic disinfection by-products has marred credibility of traditional water purification techniques like chlorination. Photocatalysis has emerged as a promising alternative technique for the disinfection of water with minimal risk of harmful by-products. The process involves a wide band gap semiconductor material which, upon irradiation of light, produces electrons and holes with high redox potential to degrade organic contaminants and microbes. In this review, we analyze the research trends in photocatalytic inactivation of water borne microorganisms. This report analyzes the major factors that affect the disinfection efficiency using this process. The discussion also includes plausible mechanisms of microbial degradation as well as a kinetic model of the inactivation process. Different approaches, like doping of semiconductors or energy band engineering or plasmon coupling, have been reported for the enhancement and utilization of ambient solar light. Photocatalysis could be a cost-effective and environmentally friendly water purification technique though further research is required to enhance its efficiency with the use of solar light.