Carbon Management Response Curves: Estimates of Temporal Soil Carbon Dynamics

Measurement of the change in soil carbon that accompanies a change in land use (e.g., forest to agriculture) or management (e.g., conventional tillage to no-till) can be complex and expensive, may require reference plots, and is subject to the variability of statistical sampling and short-term variability in weather. In this paper, we develop Carbon Management Response (CMR) curves that could be used as an alternative to in situ measurements. The CMR curves developed here are based on quantitative reviews of existing global analyses and field observations of changes in soil carbon. The curves show mean annual rates of soil carbon change, estimated time to maximum rates of change, and estimated time to a new soil carbon steady state following the initial change in management. We illustrate how CMR curves could be used in a carbon accounting framework while effectively addressing a number of potential policy issues commonly associated with carbon accounting. We find that CMR curves provide a transparent means to account for changes in soil carbon accumulation and loss rates over time, and also provide empirical relationships that might be used in the development or validation of ecological or Earth systems models.     

APPLICATION OF SCS INFILTRATION MODEL1

ABSTRACT: The SCS infiltration model was applied to the Ralston Creek watershed in eastern Iowa. The criteria to determine the various model parameters were revised to obtain a better agreement between the observed and computed total runoffs. A procedure to calibrate the infiltration model is presented. The infiltration model was used in conjunction with an overland flow model to develop flood hydrographs. The results indicate that SCS infiltration model adequately describe the distribution of losses.     

Safety evaluation of cable barriers installation on rural highways in British Columbia

Objective: The objective of this study was to evaluate the safety effectiveness of cable barrier systems installation on rural highway sections in British Columbia, Canada.

Methods: Data on police-attended serious collisions (injury?+?fatality) on a number of rural highway sections in British Columbia, Canada, were used in the analysis. An empirical Bayes (EB) approach was employed to ensure that the evaluation results were reliable and to account for the regression to the mean artifact. Safety performance functions (SPFs) were developed using data collected at similar sites. For both median cable barrier (MCB) and roadside cable barrier (RCB) sections, the evaluation was undertaken using all serious collisions, truck serious collisions, and off-road serious collisions.

Results: For MCB sections, the evaluation results showed statistically significant reductions of 21.7, 53.8, and 34.8% in all serious collisions, truck serious collisions, and off-road left (ORL) combined with head-on (HO) serious collisions. For RCB sections, statistically significant reductions of 74.7, 100, and 100% were found in all serious collisions, truck serious collisions, and off-road right (ORR) serious collisions, respectively. The impact of the after period on the evaluation results was explored. It was found that the changes in safety become more stable using an after period of 2–5 years.

Conclusions: Cable barriers were successful in reducing the frequency of serious collisions on provincial highways in British Columbia.     

Exergy analysis of the transcritical N2O refrigeration cycle with a vortex tube

In this article, a comparative study is presented for the transcritical cycle with expansion valve (TCEV) and transcritical cycle with vortex tube (TCVT) mainly based on the second law of thermodynamics. Natural refrigerant nitrous oxide (N₂O) is used in both the cycles for analysis. The evaporator and gas cooler temperatures are varied from ?55°C to 5°C and 35°C to 60°C, respectively. The effects of various operating and design parameters on the optimum heat rejection pressure, coefficient of performance (COP), exergy loss (irreversibility), and the exergetic efficiency are studied. Exergy analysis of each component in TCEV and TCVT is performed to identify the amount and locations of irreversibility. It is observed that the use of the vortex tube in place of the expansion valve reduces the total exergy losses and increases the exergetic efficiency as well as COP. The exergetic efficiency and COP of the TCVT are on average 10–12% higher compared to TCEV for the considered operating conditions. The computed values of the exergetic efficiency for TCVT using refrigerant N₂O are the highest at an evaporator temperature of ?55°C, and the corresponding values of exergetic efficiency and exergy losses varies between 25.35% and 15.67% and between 74.65% and 84.33%, respectively. However, COP at the same evaporator temperature of ?55°C varies between 0.83 and 0.51. Furthermore, the optimum heat rejection pressure in TCVT is lower compared to that in TCEV. The results offer significant help for the optimum design and operating conditions of TCVT with refrigerant N₂O.     

Heavy metal levels and solid phase speciation in street dusts of Delhi,India

Street dust samples were collected from three different localities (industrial, heavy traffic and rural) situated in the greater Delhi area of India. The samples analyzed for Cd, Zn, Pb, Ni, Cu, and Cr indicated remarkably high levels of Cr, Ni, and Cu in the industrial area, whilst Pb and Cd did not show any discernible variations between the three localities. A multivariate statistical approach (Principal Component Analysis) was used to define the possible origin of metals in dusts. The street dusts were sequentially extracted so that the solid pools of Cd, Zn, Pb, Ni, Cu, Cr could be partitioned into five operationally defined fractions viz. exchangeable, bound to carbonates, bound to Fe-Mn oxides, bound to organic matter and residual. Metal recoveries in sequential extractions were +/- 10% of the independently measured total metal concentrations. Cd was the only metal present appreciably (27.16%) in the exchangeable fraction and Cu was the only metal predominantly associated (44.26%) with organic fraction. Zn (45.64%) and Pb (28.26%) were present mainly in the Fe-Mn oxide fraction and the residual fraction was the most dominant solid phase pool of Cr (88.12%) and Ni (70.94%). Assuming that the mobility and bioavailability are related to the solubility of geochemical forms of the metals and decrease in order of extraction, the apparent mobility and potential metal bioavailability for these highly contaminated street dust samples is: Cd>Zn approximately equal Pb>Ni>Cu>Cr.     

Forecasting daily maximum surface ozone concentrations in Brunei Darussalam--an ARIMA modeling approach

A time series approach using autoregressive integrated moving average (ARIMA) modeling has been used in this study to obtain maximum daily surface ozone (O3) concentration forecasts. The order of the fitted ARIMA model is found to be (1,0,1) for the surface O3 data collected at the airport in Brunei Darussalam during the period July 1998-March 1999. The model forecasts of one-day-ahead maximum O3 concentrations have been found to be reasonably close to the observed concentrations. The model performance has been evaluated on the basis of certain commonly used statistical measures. The overall model performance is found to be quite satisfactory as indicated by the values of Fractional Bias, Normalized Mean Square Error, and Mean Absolute Percentage Error as 0.025, 0.02, and 13.14% respectively.     

global warming — uncertainties,effects, and policy options

Environmental policy making is a challenging task. Often the scope of an issue is not fully comprehended, and its future impact is even less well understood. Global warming is one of these environmental issues. The issue is made more complex because, first, there is a question of whether it is a problem at all and, second, unilateral policy making by one nation may not be sufficient or even significant to tackle the problem globally. This article outlines the scientific factors that contribute to global warming and discusses the uncertainties involved. The authors then discuss the ramifications of taking action (policy making) and failing to act (doing nothing) against the background of global warming, greenhouse gases, and cost-benefit analysis. The article concludes by reporting the results of a multidisciplinary panel of experts composed of scientists, economists, and policy analysts who commented on various policy options.     

Climate change/variability implications on hydroelectricity generation in the Zambezi River Basin

The study has analysed the effects of various factors on hydroelectric power generation potential to include climate change/variability, water demand, and installation of proposed hydroelectric power schemes in the Zambezi River Basin. An assessment of historical (1970–2000) power potential in relation to climate change/variability at existing hydro electric power schemes(Cahora Bassa, Kariba, Kafue Gorge and Itezhi-Tezhi) in the Zambezi River Basin was conducted. The correlation of hydroelectric power potential with climate change/variability aimed at observing the link and extent of influence of the latter on the former was investigated. In order to predict the future outlook of hydro electric power potential, General Circulation Models (GCM) were used to generate projected precipitation. The monthly simulated precipitation was extracted from the GCM for every sub basin and used to compute future precipitation. Further, future water demand in the sub basins of the Zambezi River Basin were estimated based on the respective population growth rate in each sub basin. Subsequently, water balance model, with projected precipitation and water demand input was used to determine projected run-offs of sub basins of the Zambezi River Basin. .Based on the projected run-offs of sub basins, reservoir storage capacities at existing hydro electric power schemes were estimated. The baseline assessment revealed a strong relationship between hydroelectric power potential and climate change/variability. The study also revealed that the main climate and other risks associated with current and future hydro electric power generation include projected dry years, floods and increasing water demand. The results indicate that the hydroelectric power potential has a tendency towards gradual reduction in its potential in all existing and proposed hydroelectric power schemes owing to climate change and increasing water demand.     

Studies on in vitro degradability of mixed crude enzyme extracts produced from Pleurotus spp

A preliminary investigation was conducted to assess lignocellulolytic efficiency of crude extracts from three white-rot fungi, Pleurotus florida PF05 (PF), Pleurotus sajor-caju PS07 (PS) and Pleurotus eryngii PE08 (PE). The activities of CMC-ase, xylanase, beta-glucosidase, beta-xylosidase, laccase and Mn peroxidase in extracts were evaluated. PF produced its highest CMC-ase (317 UL(-1)'), beta-glucosidase (62 UL(-1)), beta-xylosidase (37 UL(-1)) and laccase (347 UL(-1)) activities while, PS produced highest xylanase (269 UL-(1)) and Mn peroxidase (69 UL(-1)) activities. In addition, crude extracts extracted were employed for their in vitro degradability assessment; and were evaluated with mono and mixed extracts separately to corn cob substrate. The losses in cell wall components and dry matter during 5 and 10 days incubations were analyzed after treatments of extracts. Maximum 8.2, 4.4 and 2.8% loss were found respectivelyin hemicellulose (HC), cellulose (C) and lignin (L) with mono extract of PF within 10 days. The influence of mono extract of each strain (PF PS and PE) and their mixed extracts (PF+PS, PF+PE, PS+PE and PF+PS+PE) on degradation of cell wall constituents were remarkably differed. The mixed extract treatment proved maximum 13.6% HC loss by PF+PS+PE extract, 9.2% loss in C by PF+PS extract and 5.2% loss of L by the PF+PS+PE extract treatment. The highest dry matter loss (8.2%) was recorded with PF+PS+PE mixed extract combination.