Development of the Ammonia Injection Technology (AIT) for the Control of PCDD/PCDF and Acid Gases from Municipal Solid Waste Incinerators

This article describes the development of the Ammonia Injection Technology (AIT), a technology for the simultaneous control of the emissions of PCDD/PCDF (polychlorinated p-dibenzodioxins and polychlorinated dibenzofurans), HCI, SO₂ and NOX from municipal solid waste incinerators. It briefly reviews the theoretical basis of the technology and the bench-scale and pilot-scale experiments. It describes the results of the pilot-scale experiment in detail and reports on the finding that the formation of PCDD and PCOF takes place in different regions of the boiler system. Finally, a concept is introduced for the treatment of emission control residues which could lead to the recovery of chlorine from waste products and its “recycle” to the chlorine manufacturing process (“closed chlorine life cycle“ concept).     

Chemical contaminants in fish feeds used in federal salmonid hatcheries in the USA

Recent studies have demonstrated that fish feeds contain significant concentrations of contaminants, many of which can bioaccumulate and bioconcentrate in fish. Organochlorine (OC) contaminants are present in the fish oils and fish meals used in feed manufacture, and some researchers speculate that all fish feeds contain measurable levels of some contaminants. To determine the concentration of contaminants in feeds used in US Fish and Wildlife Service's National Fish Hatcheries, we systematically collected samples of feed from 11 cold-water fish hatcheries. All samples (collected from October 2001 to October 2003) contained at least one polychlorinated dibenzo-p-dioxin (PCDD), polychlorinated dibenzofuran (PCDF), polychlorinated biphenyl (PCB) congener, or dichlorodiphenyltrichloroethane (DDT) metabolite. Of the 55 samples in which they were analyzed 39 contained PCDDs, 24 contained PCDFs and 24 contained DDT or its metabolites. There were 10- to 150-fold differences in concentrations of total PCBs, PCDDs, PCDFs and DDT. Although PCBs were the most commonly detected contaminant in our study, concentrations (range: 0.07-10.46 ng g(-1) wet weight) were low compared to those reported previously. In general, we also found lower levels of OCs than reported previously in fish feed. Perhaps most notable was the near absence of OC pesticides - except for DDT or its metabolites, and two samples containing hexachlorocyclohexane (HCH). While contaminant concentrations were generally low, the ecological impacts can not be determined without a measure of the bioaccumulation of these compounds in the fish and the fate of these compounds after the fish are released.     

Performance of wastewater subsurface drip emitters at low and normal pressure.

Subsurface drip distribution is an important on-site wastewater treatment technique widely used with various soil types and restricted site conditions. This study evaluated the performance of five subsurface wastewater drip products under eight pressures, ranging from 0 to 310 kPa. Results showed that Netafim Bioline pressure-compensating emitters (Netafim Irrigation Inc., Fresno, California) had an application uniformity coefficient of 95% and a coefficient of variance (C(v)) of 4.9%. The average uniformity coefficient of Geoflow Wasteflow products (Geoflow USA, Charlotte, North Carolina) was 94.4%, with a C(v) value of 6.8%. Flowrate and pressure relationships were developed by analyzing low and normal operational pressure ranges, and R-square values ranged from 1.000 to 0.301. Geoflow pressure-compensating products were non-pressure-compensating emitters under low pressure. Netafim pressure-compensating emitters were partially pressure-compensating under low pressures. In normal operational pressure ranges, both Geoflow and Netafim products were fully pressure-compensating. Netafim pressure-compensating products were characterized as pressure-compensating over the full range of operational pressures.     

Consequences of Embryonic UV-B Exposure for Embryos and Tadpoles of the Plains Leopard Frog

Abstract: In organisms with complex life cycles, understanding the effects of environmental change requires investigating the possibility that the effect of such change on one stage will have consequences for other stages. We investigated the effects of embryonic exposure to UV-B radiation on embryo and tadpole development of the plains leopard frog (   Rana blairi ). Embryos were exposed to sunlight filtered to provide two levels of UV-B exposure (e.g., at 310 nm: high exposure is approximately 84% transmittance and low exposure is approximately 58% transmittance). Hatching success of embryos exposed to different UV-B levels did not differ. Tadpoles resulting from exposed embryos were raised at three densities. Growth and development were slower in tadpoles exposed to higher UV-B levels as embryos. Density negatively affected growth and development. Survivorship did not differ among UV-B or density treatments. Our results suggest that even if lethal effects are not exhibited at one stage, sublethal effects may manifest themselves at other stages, possibly affecting the long-term success of exposed individuals and populations.     

A Processing,Characterization and Marine Biodegradation Study of Melt-Extruded Polyhydroxyalkanoate (PHA) Films

A series of polyhydroxyalkanoates (PHA), all containing 1% nucleating agent but varying in structure, were melt-processed into films through single screw extrusion techniques. This series consisted of three polyhydroxybutyrate (PHB) and three polyhydroxybutyrate-valerate (PHBV) resins with varying valerate content. Processing parameters of temperature in the barrel (165–173 °C) and chill rolls (60 °C) were optimized to obtain cast films. The gel-permeation chromatography (GPC) results showed a loss of 8–19% of the polymer’s initial molecular weight due to extrusion processing. Modulated differential scanning calorimetry (MDSC) displayed glass transition temperatures of the films ranging from −4.6 to 6.7 °C depending on the amount of crystallinity in the film. DSC data were also used to calculate the percent crystallinity of each sample and slightly higher crystallinity was observed in the PHBV series of samples. X-ray diffraction patterns did not vary significantly for any of the samples and crystallinity was confirmed with X-ray data. Dynamic mechanical analysis (DMA) verified the glass transition trends for the films from DSC while loss modulus (E′) reported at 20 °C showed that the PHBV (3,950–3,600 MPa) had the higher E′ values than the PHB (3,500–2,698 MPa) samples. The Young’s modulus values of the PHB and PHBV samples ranged from 700 to 900 MPa and 900 to 1,500 MPa, respectively. Polarized light microscopy images revealed gel particles in the films processed through single-screw extrusion, which may have caused diminished Young’s modulus and tensile strength of these films. The PHBV film samples exhibited the greatest barrier properties to oxygen and water vapor when compared to the PHB film samples. The average oxygen transmission rate (OTR) and water vapor transmission rate (WVTR) for the PHBV samples was 247 (cc-mil/m²-day) and 118 (g-mil/m²-day), respectively; while the average OTR and WVTR for the PHB samples was 350 (cc-mil/m²-day) and 178 (g-mil/m²-day), respectively. Biodegradation data of the films in the marine environment demonstrated that all PHA film samples achieved a minimum of 70% mineralization in 40 days when run in accordance with ASTM 6691. For static and dynamic incubation experiments in seawater, microbial action resulting in weight loss as a function of time showed all samples to be highly biodegradable and correlated with the ASTM 6691 biodegradation data.     

Temperature influences carbon accumulation in moist tropical forests

Evergreen broad-leaved tropical forests can have high rates of productivity and large accumulations of carbon in plant biomass and soils. They can therefore play an important role in the global carbon cycle, influencing atmospheric CO2 concentrations if climate warms. We applied meta-analyses to published data to evaluate the apparent effects of temperature on carbon fluxes and storages in mature, moist tropical evergreen forest ecosystems. Among forests, litter production, tree growth, and belowground carbon allocation all increased significantly with site mean annual temperature (MAT); total net primary productivity (NPP) increased by an estimated 0.2-0.7 Mg C x ha(-1) x yr(-1) x degrees C(-1). Temperature had no discernible effect on the turnover rate of aboveground forest biomass, which averaged 0.014 yr(-1) among sites. Consistent with these findings, forest biomass increased with site MAT at a rate of 5-13 Mg C x ha(-1) x degrees C(-1). Despite greater productivity in warmer forests, soil organic matter accumulations decreased with site MAT, with a slope of -8 Mg C x ha(-1) x degrees C(-1), indicating that decomposition rates of soil organic matter increased with MAT faster than did rates of NPP. Turnover rates of surface litter also increased with temperature among forests. We found no detectable effect of temperature on total carbon storage among moist-tropical evergreen forests, but rather a shift in ecosystem structure, from low-biomass forests with relatively large accumulations of detritus in cooler sites, to large-biomass forests with relatively smaller detrital stocks in warmer locations. These results imply that, in a warmer climate, conservation of forest biomass will be critical to the maintenance of carbon stocks in moist tropical forests.     

Tipping point: The narrow path between automation acceptance and rejection in air traffic management

Capacity limits on the air traffic management (ATM) system are of global concern. One solution to increase the efficiency of existing ATM system is through the implementation of advanced automation. However, past experience suggests ATCOs are selective and critical about the forms of automation they are given. Therefore, this study aimed to determine if a threshold or tipping point exists, a point after which users (Air Traffic Control Operators; ATCOs) of automation are no longer willing to accept or cooperate with the automation. 500 Air Traffic Control Operators completed an on-line survey that comprised a series of demographic questions as well as two hypothetical but plausible futuristic air traffic management tools. Each tool contained seven different situations involving different levels of automation involvement ranging from fully manual operation to fully automated. Participants were asked to rate on a five point Likert scale the extent to which they agreed with the statements describing their interaction with the new tools. The results revealed a ‘tipping point’ in automation acceptance/rejection reflecting the point where the applied level of automation shifted the locus of decision-making away from the operator. The results are discussed from a theoretical and applied perspective.     

Learning and the transformative potential of citizen science

The number of collaborative initiatives between scientists and volunteers (i.e., citizen science) is increasing across many research fields. The promise of societal transformation together with scientific breakthroughs contributes to the current popularity of citizen science (CS) in the policy domain. We examined the transformative capacity of citizen science in particular learning through environmental CS as conservation tool. We reviewed the CS and social‐learning literature and examined 14 conservation projects across Europe that involved collaborative CS. We also developed a template that can be used to explore learning arrangements (i.e., learning events and materials) in CS projects and to explain how the desired outcomes can be achieved through CS learning. We found that recent studies aiming to define CS for analytical purposes often fail to improve the conceptual clarity of CS; CS programs may have transformative potential, especially for the development of individual skills, but such transformation is not necessarily occurring at the organizational and institutional levels; empirical evidence on simple learning outcomes, but the assertion of transformative effects of CS learning is often based on assumptions rather than empirical observation; and it is unanimous that learning in CS is considered important, but in practice it often goes unreported or unevaluated. In conclusion, we point to the need for reliable and transparent measurement of transformative effects for democratization of knowledge production.     

Combining state and transition models with dynamic Bayesian networks

Bashari et al. (2009) propose combining state and transition models (STMs) with Bayesian networks for decision support tools where the focus is on modelling the system dynamics. There is already an extension of Bayesian networks - so-called dynamic Bayesian networks (DBNs) - for explicitly modelling systems that change over time, that has also been applied in ecological modelling. In this paper we propose a combination of STMs and DBNs that overcome some of the limitations of Bashari et al.’s approach including providing an explicit representation of the next state, while retaining its advantages, such an the explicit representation of transitions. We then show that the new model can be applied iteratively to predict into the future consistently with different time frames. We use Bashari et al.’s rangeland management problem as an illustrative case study. We present a comparative complexity analysis of the different approaches, based on the structure inherent in the problem being modelled. This analysis showed that any models that explicitly represent all the transitions only remain tractable when there are natural constraints in the domain. Thus we recommend modellers should analyse these aspects of their problem before deciding whether to use the framework.