Semi-Direct Lysis of Swabs and Evaluation of Their Efficiencies to Recover Human Noroviruses GI and GII from Surfaces

Enteric viruses such as noroviruses (NoVs) continue to be the cause of widespread viral outbreaks due to person-to-person transmission, contaminated food, and contaminated surfaces. In order to optimize swabbing methodology for the detection of viruses on (food) contact surfaces, three swab elution/extraction strategies were compared in part one of this study, out of which, one strategy was based on the recently launched ISO protocol (ISO/TS 15216-1) for the determination of hepatitis A virus and NoV in food using real-time RT-PCR (RT-qPCR). These three swab elution/extraction strategies were tested for the detection of GI.4 and GII.4 NoV on high-density polyethylene (HD-PE) surfaces with the use of cotton swabs. For detection of GI.4 and GII.4, the sample recovery efficiency (SRE) obtained with the direct lysis strategy (based on ISO/TS 15216-1) was significantly lower than the SRE obtained with both other strategies. The semi-direct lysis strategy was chosen to assess the SRE of two common swabs (cotton swab and polyester swab) versus the biowipe (Biomérieux, Lyon, France) on three surfaces (HD-PE, neoprene rubber (NR), and nitrile gloves (GL)). For both surfaces, HD-PE and GL, no significant differences in SREs of GI.4 and GII.4 NoVs were detected between the three different swabs. For the coarser NR, biowipes turned out to be the best option for detecting both GI.4 and GII.4 NoV.     

An analytical model for the interpretation of pulse injection experiments performed for testing the spatial variability of clay formations

This paper presents an analytical model to describe pulse injection experiments. This model solves the advection-diffusion equation while taking into account back diffusion from the clay core to the inlet and from the outlet to the clay core. In most analytical models, back diffusion is neglected. For sufficiently high Péclet numbers, this is a good approximation. However, in experiments where the Péclet number is low, back diffusion is important and must be taken into account. An additional advantage of the present model is that both concentration and flux are conserved at the inlet and at the outlet of the clay core. This model is used to fit pulse injection experiments with iodide and tritiated water (HTO) in clay cores. The (new) model is required for fitting the experimental results since in clay layers advection is very slow leading to a low Péclet number. The experiments are performed on clay cores taken from different depths from the Boom Clay and the Ypres Clay layer under the site of the nuclear power plant of Doel (Belgium). The quality of all fits is excellent and the obtained parameter values are coherent. For HTO, the fitted value for the diffusion accessible porosity is consistent with measurements of the water content in Ypres Clay cores. In both types of clays, the apparent diffusion coefficient at zero flow is between 10(-10) and 2 x 10(-10) m(2)/s for iodide and between 2 x 10(-10) and 3 x 10(-10) m(2)/s for HTO. The dispersion length is in the order of 10(-3) m. The average value for the diffusion accessible porosity is between 0.35 and 0.4 for HTO and between 0.2 and 0.25 for iodide.     

Impact of Construction Waste Disposal Charging Scheme on work practices at construction sites in Hong Kong

Waste management in the building industry in Hong Kong has become an important environmental issue. Particularly, an increasing amount of construction and demolition (C&D) waste is being disposed at landfill sites. In order to reduce waste generation and encourage reuse and recycling, the Hong Kong Government has implemented the Construction Waste Disposal Charging Scheme (CWDCS) to levy charges on C&D waste disposal to landfills. In order to provide information on the changes in reducing waste generation practice among construction participants in various work trades, a study was conducted after 3 years of implementation of the CWDCS via a structured questionnaire survey in the building industry in Hong Kong. The study result has revealed changes with work flows of the major trades as well as differentiating the levels of waste reduced. Three building projects in the public and private sectors were selected as case studies to demonstrate the changes in work flows and the reduction of waste achieved. The research findings reveal that a significant reduction of construction waste was achieved at the first 3 years (2006–2008) of CWDCS implementation. However, the reduction cannot be sustained. The major trades have been influenced to a certain extent by the implementation of the CWDCS. Slight improvement in waste management practices was observed, but reduction of construction waste in the wet-finishing and dry-finishing trades has undergone little improvement. Implementation of the CWDCS has not yet motivated subcontractors to change their methods of construction so as to reduce C&D waste.     

Storage and metabolism of radioactively labeled pyrrolizidine alkaloids by butterflies and larvae of Mechanitis polymnia (Lepidoptera: Nymphalidae,Ithomiinae)

Summary. Tracer feeding studies with radioactively labeled pyrrolizidine alkaloids (PAs) were performed to attain experimental information about the specificity and mechanisms of uptake, metabolism and storage of PAs in the alkaloid sequestering ithomiine butterfly Mechanitis polymnia. Adult butterflies easily ingest the tracers offered dissolved in a saturated sugar solution. Feeding of [¹⁴C]rinderine (free base) confirmed that M. polymnia is well adapted to sequester and maintain PAs of the lycopsamine type. Approximately 80% of the ingested radioactivity can be recovered in methanol extracts of the butterflies over a period of at least 6 hours. Labeled rinderine is efficiently N-oxidized and transformed into a metabolite of still unknown structure. These two metabolites are formed in almost equal amounts and account for more than 90% of total radioactivity. After four hours the toxic free base is only detectable in traces. Radioactively labeled senecioylretronecine (free base), a PA that often accompanies PAs of the lycopsamine type in plants, is metabolized in a different manner. The toxic free base disappeared as fast as the tertiary rinderine, but the final products which accumulated in a stable ratio after 12 hours were mainly two polar metabolites of unknown structure; senecioylretronecine N-oxide accounts for less than 10% of total PAs. Labeled senecionine a macrocyclic PA, which never has been found in wild caught M. polymnia is only slowly N-oxidized. In females ca 50% of the ingested senecionine is still present as free base after 24 hours, whereas under the same conditions in males this percentage is only ca 20%. This difference in N-oxidation was the only significant sex-specific difference observed in various experiments. Larvae of M. polymnia which feed on Solanum tabacifolium, a plant that does not contain PAs, are able to sequester and partly N-oxidize labeled senecioylretronecine and senecionine. However, the storage is not very efficient; with the two tracers less than 5% of radioactivity remained in the bodies after 24 hours. Received 19 October 1999; accepted 24 November 1999     

The influence of social relationships on pro-environment behaviors

We examine how social relationships are related to pro-environment behaviors. We use new data from a nationally representative US sample to estimate latent cluster models in which we describe individuals' profiles of social ties with family, neighbor, and coworkers along two dimensions: intensity of connections and pro-environment norms. While our results confirm the link between social ties and economic behaviors, we show that ties among relatives, neighbors, and coworkers are not perfect substitutes. In particular, we observe consistent relationships between green family profiles and altruistic and community-based behaviors. We also find that the effect of coworker ties is visible for cost-saving activities and altruistic behaviors, and that neighbors matter for working with others in the community to solve a local problem, volunteering, and recycling.     

The influence of metabolically engineered glucosinolates profiles in Arabidopsis thaliana on Plutella xylostella preference and performance

The oviposition preference and larval performance of the diamondback moth (DBM), Plutella xylostella, was studied using Arabidopsis thaliana plants with modified glucosinolate (GS) profiles containing novel GSs as a result of the introduction of individual CYP79 genes. The insect parameters were determined in a series of bioassays. The GS content of the plants as well as the number of trichomes were measured. Multivariate analysis was used to determine the possible relationships among insect and plant variables. The novel GSs in the tested lines did not appear to have any unequivocal effect on the DBM. Instead, the plant characteristics that affected larval performance and larval preference did not influence oviposition preference. Trichomes did not affect oviposition, but influenced larval parameters negatively. Although the tested A. thaliana lines had earlier been shown to influence disease resistance, in this study no clear results were found for P. xylostella.