A survey on the utility of the USEPA CADDIS stressor identification procedure

The Environmental Protection Agency (EPA) has made available on the worldwide web a systematic stream stressor identification procedure, the “Causal Analysis/Diagnosis Decision Information System” or CADDIS. We report here the results of a survey of regulators and scientists in 11 states who use CADDIS or another stressor identification procedure in their work. The 13 survey questions address guidelines as to what impairment scenarios to approach with stressor identification, what information is needed to perform stressor identification, and what the stakeholder role is in performing stressor identification. At the time of this survey (the summer of 2009), the EPA CADDIS website was less commonly used among the state regulators surveyed than the published EPA stressor identification document on which it is based. The respondents generally find the EPA stressor identification procedure useful and capable of being adapted to their individual needs. Survey respondents all use stressor identification in their Total Maximum Daily Load work, but also in a wide variety of other applications. All the “types of evidence” included in the CADDIS stressor identification procedure are used by the practitioners surveyed with the exception of the results of ecological simulation models. While the CADDIS documentation encourages the involvement of stakeholders in stressor identification, most respondents do not assemble stakeholder teams of local officials and citizens to participate in stressor analyses.     

Simultaneous quantification of Bi(III) and U(VI) in environmental water samples with a complicated matrix containing organic compounds

Trace amounts of bismuth(III) and uranium(VI) can be simultaneously determined in a single scan by adsorptive cathodic stripping voltammetry in the presence of cupferron as a complexing agent. Optimal conditions were found to be: 0.1 mol?L^?1 acetate buffer (pH 5.3), 5?×?10^?5?mol?L^?1 cupferron, accumulation potential of ?0.25 V, and accumulation time of 30 s. The linear range of Bi(III) and U(VI) was observed over the concentration range from 2?×?10^?9 to 2?×?10^?7?mol?L^?1 and from 1?×?10^?8 to 5?×?10^?7?mol?L^?1, respectively. The influence of the main components of real water samples such as foreign ions and organic substances (surface active substances, humic substances) was precisely investigated. The method was applied to the simultaneous measurements of bismuth and uranium in natural water samples.     

N-nitrosodimethylamine and trihalomethane formation and minimisation in Southeast Queensland drinking water

This study assesses the prevalence of disinfection by-product (DBP) precursors in some Southeast Queensland drinking water sources by conducting formation potential experiments for the four regulated trihalomethanes (THMs), and the potent carcinogen, N-nitrosodimethylamine (NDMA). NDMA formation potentials were consistently low (<5-21 ng/L), and total THM (tTHM) formation potentials were consistently below the Australian Drinking Water Guideline (250 μg/L). NDMA concentration of finished drinking waters was also monitored and found to be <5 ng/L in all cases. The effect of coagulation and advanced oxidation on the formation of NDMA and THMs is also reported. UV/H(2)O(2) pre-treatment was effective in producing water with very low THMs concentrations, and UV irradiation was an effective method for NDMA degradation. H(2)O(2) was not required for the observed NDMA degradation to occur. Coagulation using alum, ferric chloride or poly(diallyldimethylammonium chloride) (polyDADMAC) was ineffective in removing DBPs precursors from the source water studied, irrespective of the low dissolved organic carbon (DOC) and dissolved organic nitrogen (DON) attained. Rather, coagulation with polyDADMAC caused an increase in NDMA formation potential upon chloramination, and all coagulants led to an increased tTHM formation potential upon chlorination due to the high bromide concentration of the source water studied.     

Altered growth and enzyme expression profile of ZnO nanoparticles exposed non-target environmentally beneficial bacteria

The extensive production and usage of nanoparticles with ultimate disposal in the environment leads to unintentional exposure of non-target environmentally beneficial bacteria thereby posing a serious threat to the native soil inhabitants. Soil microflora is an important link in the biogeochemical cycling of nutrients, affecting ecosystem functioning and productivity. This study evaluates the effect of one of the widely used nanoparticles, zinc oxide on two predominant soil bacteria, Gram-positive Bacillus subtilis and Gram-negative Pseudomonas aeruginosa with respect to their biocatalytic activities. Growth profiles of these bacteria in the presence of zinc oxide nanoparticles (ZnONPs) at a concentration of 20 ppm exhibited a prolonged lag phase in B. subtilis, whereas no significant effect was observed in the case of P. aeruginosa even at 200 ppm. Interestingly, the enzymatic profile of both the organisms was affected at non-lethal ZnONPs concentrations. The most pronounced effect was on the enzymes associated with amylolytic activity, denitrification and urea degradation wherein total inhibition of activity was noted in B. subtilis. The enzyme activities were lowered in the case of P. aeruginosa. The results presented here reiterate a critical need for exposure assessment and risk characterization of nanomaterial disposal on soil microflora while formalizing waste management strategies.     

Changes in the trade in native medicinal plants in Brazilian public markets

Plants continue to be an important source of new bioactive substances. Brazil is one of the world’s mega-diverse countries, with 20 % of the world’s flora. However, the accelerated destruction of botanically rich ecosystems has contributed to a gradual loss of native medicinal species. In previous study, we have observed a fast and intensive change in trade of medicinal plants in an area of Amazon, where human occupation took place. In this study, we surveyed 15 public markets in different parts of Brazil in search of samples of 40 plants used in traditional medicine and present in first edition of Brazilian Official Pharmacopoeia (FBRAS), published in 1926. Samples of plants commercialized as the same vernacular name as in Pharmacopoeia were acquired and submitted to analysis for authentication. A total of 252 plant samples were purchased, but the laboratory analyses showed that only one-half of the samples (126, 50.2 %) were confirmed as the same plant species so named in FBRAS. The high number of unauthenticated samples demonstrates a loss of knowledge of the original native species. The proximity of the market from areas in which the plant occurs does not guarantee that trade of false samples occurs. The impact of the commerce of the substitute species on their conservation and in public health is worrying. Strategies are necessary to promote the better use and conservation of this rich heritage offered by Brazilian biodiversity.     

Adjusting the effect of seasonal variability in the bioassessment of streams

Bioassessment tools should distinguish between the effects of anthropogenic degradation in communities and natural temporal changes. The present study tests the influence of natural seasonal variability on macroinvertebrate stream communities assessed by a predictive model (PORTRIV) and a multimetric index (IPtI) calibrated for spring. The scores of PORTRIV decreased significantly between spring and autumn, and between spring and winter (ca. 37 to 53 %, respectively), while those of IPtI did not change significantly between seasons. For non-reference samples, the results of the predictive model also indicate no significant differences. A correction factor (CF) was calculated to adjust the existing differences in the model assessments between seasons, based on the percentage of variation of reference site scores from spring to autumn and winter. After the application of the CF to the OE50 scores of spring reference samples, the differences were no longer significant. Independent reference validation sites confirmed this tendency. This method has the advantage of avoiding large efforts required for the construction of databases from other seasons and the development of new models to allow the assessment of streams in seasons other than spring. Further tests with models developed in regions with more marked seasonal changes should be done to confirm its wider applicability.     

Suspended particulate matter estimates using optical and acoustic sensors: application in Nestos River plume (Thracian Sea,North Aegean Sea)

The present study investigates the use of combined methods of optical and acoustic sensors, in collaboration with direct in situ measurements, for the calibration and validation of a model transforming acoustic backscatter intensity series into suspended particulate matter (SPM) concentration datasets. The model follows previously elaborated techniques, placing particular attention to the parameterization of the acoustic absorption index as a function of water physical properties. Results were obtained from the annual deployment (during 2007–2008) of an upward-facing acoustic Doppler current profiler (ADCP) (307 kHz), equipped with a Wave Array, and an optical backscatter sensor (OBS), at the bottom of Thassos Passage near Nestos River plume (Thracian Sea, Northern Greece). The OBS was calibrated through linear regression, using 2007 and 2012 field sampling data, exhibiting an error of 13–14 % due to chlorophyll presence. The ADCP signal was calibrated through simultaneous measurements of backscatter intensity and turbidity profiles. Harmonic analysis on the model-produced SPM concentrations explained the tidal influence on their variability, especially during the summer. Empirical orthogonal functions analysis revealed the impact of waves and wave-induced currents on SPM variability. Finally, Nestos River sediment load was found uncorrelated to the SPM change in Thassos Passage, due to the dispersal and sediment deposition near the river mouth.     

Statistical characteristics of selected elements in vegetables from Kosovo

Zinc, copper, iron, chromium and cobalt are essential elements for human health, showing toxicity only in high concentrations, while lead and cadmium are extremely toxic even as traces. Therefore, it is important to monitor the contents of toxic metals in vegetables. Large number of vegetables is grown and used in nutrition, in Kosovo. The concentrations of selected elements in vegetables (radish, onion, garlic and spinach) from Kosovo were determined using ICP-OES method. Oral intake of metals and health risk index were calculated. Statistical analysis indicated numerous positive correlations between concentrations of selected elements in vegetables. As a result of principal component analysis, 15 new variables were obtained which were characterized by eigenvalues. The sequence of health quotients for the heavy metals followed the decreasing order Zn?=?Mn?>?Pb?>?Cu?>?Ni?>?Fe?>?Cd?>?Co?>?Cr. The health quotients for all investigated heavy metals were below 1 (one), which is considered safe. The vegetables from Kosovo are mainly safe for use in everyday diet.     

Systematic evaluation of dissolved lead sorption losses to particulate syringe filter materials

Distinguishing between soluble and particulate lead in drinking water is useful in understanding the mechanism of lead release and identifying remedial action. Typically, particulate lead is defined as the amount of lead removed by a 0.45-μm filter. Unfortunately, there is little guidance regarding selection of filter membrane material and little consideration to the possibility of the sorption of dissolved lead to the filter. The objective of this work was to examine the tendency of 0.45-μm syringe filter materials to adsorb lead. Tests were performed with water containing 40 and 24 μg/L soluble lead at pH 7 buffered with 50 mg C/L dissolved inorganic concentration (DIC). The amounts of lead sorbed greatly varied by filter, and only two filter types, polypropylene and mixed cellulose esters, performed well and are recommended. Great care must be taken in choosing a filter when filtering soluble lead and interpreting filter results.