Water Network Synthesis Using Mutation-Enhanced Particle Swarm Optimization

Different techniques for the synthesis of industrial water reuse/recycle networks have been developed in recent process integration research. These tools range from graphical pinch analysis approaches to mathematical programming models. The latter have the advantage of being flexible enough to incorporate various water network constraints, but in many cases these are often non-linear, thus making the identification of global optima difficult. Recent work has demonstrated the effectiveness of metaheuristic algorithms such as particle swarm optimization (PSO), for finding good solutions these problems. This work describes the use of a modified PSO for solving mixed integer non-linear programming (MINLP) models for water network synthesis. By incorporating a mutation operator for the binary variables in the model, the algorithm is able to escape sub-optimal network topologies and proceed towards better solutions than can be found with ordinary PSO. Two case studies involving water recycle/reuse are used to demonstrate the new design methodology.     

Fire and explosion risk assessment for large-scale oil export terminal

Now in Russian Federation and other countries large-scale oil terminals (volume of one tank exceeds 100 000 m³, total volume of tanks exceeds 300 000 m³) are designed and constructed. Therefore fire safety of such objects becomes a very important task, solution of which is hardly possible without detail fire risk assessment. This study is aimed to a solution of this problem. Potential, individual and social risks were calculated. The potential risk was defined as a frequency of occurrence of hazardous factors of fires and explosions in a given point of space (the so-called risk contours). The individual risk was defined as a frequency of injuring a given person by hazardous factors of fires and explosions. Time of presence of this person in hazardous zones (near the hazardous installation) is taken into account during calculations of the individual risk. Social risk was defined as a dependence of frequency of injuring a given number of people by hazardous factors of fires and explosions on this number. In practice the social risk is usually determined on injuring not less than 10 people.

The oil terminal under consideration includes the following main parts: crude oil storage consisting of three tanks of volume 100 000 m³ each, input crude oil pipeline of diameter 0.6 m, crude oil pumps, output crude oil pipeline of diameter 0.8 m, auxiliary buildings and facilities. The following main scenarios of tank fires have been considered: rim seal fire, pool fire on a surface of a floating roof, pool fire on a total cross-section surface of the tank, pool fire in a dyke, explosions in closed or semiclosed volumes. Fires and explosions in other parts of the terminal are also taken into account. Effects of escalation of accidents are considered.

Risk contours have been calculated both for the territory of the terminal and for the neighbouring space. The potential risk for the storage zone is near 10⁻⁴–10⁻⁵ year⁻¹, and at a distance 500 m from the terminal the potential risk values do not exceed 10⁻⁶ year⁻¹. The values of the individual risk for various categories of workers are in the range of 10⁻⁵–10⁻⁶ year⁻¹. Because of low number of the workers on the terminal and large distances to towns and villages the social risk value is negligible. These risk values are consistent with practice of the best oil companies, and fire hazard level of the terminal can be accepted as tolerable.     

EFFECTS OF SELECTED HERBICIDES ON BACTERIAL POPULATIONS IN NONTREATED AND TREATED WATER1

ABSTRACT: Bacterial populations in nontreated and herbicide-treated waters were subjected to three different herbicides. Diuron, dichlobenil, and diquat were added (100 mg/l) to water samples from two fresh water lakes and two herbicide-treated ponds. Total numbers of bacteria were monitored. Bacterial populations in fresh lake water decreased after herbicide additions; however, final populations were significantly greater than the controls. Similar observations were recorded for bacteria in dichlobenil- and diuron-treated waters. Selective enrichment is probably expressed in these experiments.     

PHREATOPHYTE EVAPOTRANSPIRATION AND ITS POTENTIAL REDUCTION WITHOUT ERADICATION1

ABSTRACT: The continuous availability of ground water to riparian phreatophytic vegetation results in large evapotranspiration (ET) losses in summer. Chemical or physical eradication of this vegetation can have undesirable environmental side effects. Spraying phreatophyte foliage with a nontoxic antitranspirant (AT) may reduce transpiration without eradication. Transpiration rate per unit leaf area was similar for several phreatophyte species, but ET per unit land area of phreatophytes depneds more on stand density than species. The mean ET for saltcedar in June was 8.1 mm/day measured by Bowen ratio, compared with 7.9 mm by lysimeters. ATs and growth-retardants reduced transpiration by over 50 percent in laboratory tests where foliage was thoroughly sprayed. In the field AT sprayed by a back-pack mistblower reduced ET by 20–35 percent initially and 10 percent after a month. No ET reduction occurred when AT was sprayed by helicopter on saltcedar, because excessive droplet size and heavy salt deposits on the foliage resulted in poor spray adherence. Wax-based AT was relatively nontoxic to fish and wildlife. Dissolved oxygen could be reduced for aquatic life, but further AT dilution in streams and ponds would minimize this. Helicopter spraying may affect bird nests and egg hatchability. Although ATs significantly reduce ET, their high cost and spraying difficulties preclude current use on phreatophytes. With improvement they may economically help to conserve water in riparian areas in future years.     

Human impact on beach and foredune vegetation of North Padre Island,Texas

Vehicular and pedestrian traffic decreased top and root production, percent cover, and diversity of vegetation, and modified species composition on beach and foredune areas of Padre Island National Seashore and Nueces County Park. Degradation of vegetal cover was directly related to the type and intensity of traffic; species in heavily trafficked areas represented earlier successional stages than those in comparable undisturbed areas.     

Sample intake position and loading rates from nonpoint source pollution

Paired water samples were simultaneously activated from two different vertical positions within the approach section of a flow-control structure to determine the effect of sample intake position on nonpoint runoff parameter concentrations and subsequent event loads. Suspended solids (SS), total phosphorus (TP) and organic plus exchangeable nitrogen [(Or+Ex)-N] were consistently higher throughout each runoff event when sampled from the floor of the approach section as opposed to those samples taken at midstage. Dissolved molybdate reactive phosphorus (DMRP) and ammonium (NH₄-N) concentrations did not appear to be significantly affected by the vertical difference in intake position. However, the nitrate plus nitrite nitrogen [(NO₃+NO₂)-N] concentrations were much higher when sampled from the midstage position.Although the concentration differences between the two methods were not appreciable, when evaluated in terms of event loads, discrepancies were evident for all parameters. Midstage sampling produced event loads for SS, TP, (Or + Ex)–N, DMRP, NH₄-N, and (NO₃+NO₂)-N that were 44,39,35,80,71, and 181%, respectively, of floor sampling loads. Differences in loads between the two methods are attributed to the midstage position, sampling less of the bed load. The correct position will depend on the objective; however, such differences should be recognized during the design phase of the monitoring program.This work was supported by the Soil Science Department, College of Agriculture and Life Sciences, University of Wisconsin-Madison, and by the U.S. Environmental Protection Agency, Region V., Chicago, Illinois (Grant No. G005139-01).     

Factors influencing voting by the united states congress on the national energy act

A myriad of factors, both economic and political, influenced the voting by members of the United States Congress on the 1978 National Energy Act. Determinant factors considered in our analysis included the percentage of residents in the Congressman's district residing in the central city or on farms; the percentage of residents who belong to labor unions; the average level of education of the residents; oil, coal, and natural gas production in the state relative to total domestic production. The results, determined by means of logit analysis, indicate that the impact on low-income energy consumers, the effect on overall employment, the impact on farmers, and the benefits to energy interests, as well as ideology and the subjective perception that the need exists to do something about the energy situation in the United States, were all important explanatory factors.The author is an economist with the United States Department of Energy. The views expressed are those of the author and do not necessarily represent the policies of the Department of Energy or the views of other Department of Energy staff members.