Variations in the physicochemical characteristics of the Buffalo River in the Eastern Cape Province of South Africa

The physicochemical characteristics of the Buffalo River in the Eastern Cape Province of South Africa were evaluated using standard methods. The assessment was carried out with total of 72 water samples collected from six sites over a 12-month period, from August 2010 to July 2011. Water temperature ranged from 11 to 28 °C, while pH varied from 6.6 to 10.7 and turbidity from 1.7 to 133 NTU. Electrical conductivity, total dissolved solids (TDS) and salinity showed drastic variations (42.3–46,693 μS/cm, 20.3–23,350 mg/l and 0.02–33.8 PSU, respectively) and the significantly (P?<?0.05) higher mean values of these parameters recorded at Parkside reflect the influence of seawater at the Buffalo River estuary. The concentrations of other parameters ranged as follows: chloride (3.7–168 mg/l), DO (6.9–11.1), BOD (0.6–9.4), COD (3.7–45.9), nitrite–nitrogen (0.02–0.21), nitrate–nitrogen (1–4.47) and orthophosphate (0.01–1.72). There was a significant positive correlation between water temperature and DO (r?=?0.200; P?<?0.01). Significant (P?<?0.01) positive correlations also existed between TDS and salinity (r?=?0.921), COD and each of salinity (r?=?0.398), TDS (r?=?0.375) and chloride (r?=?0.330), nitrate and phosphate (r?=?0.323) and BOD and turbidity (r?=?0.290). Significant (p?<?0.01) inverse relationships existed between DO and each of phosphate (r?=??0.295) and nitrate (r?=??0.168). We conclude that the Buffalo River water quality deteriorated in the plains, compared with the upper reaches. Urgent measures are needed to safeguard the river in view of the potential health concerns as many households rely solely on the untreated river water.     

Habitat Matrix Effects on Pond Occupancy in Newts

Abstract: In farmlands, the population viability of many amphibians is suspected to depend on the resistance the matrix of crop fields presents to movements between ponds and terrestrial sites and movements among ponds. Over recent decades the increase in cereal growing at the expense of cattle breeding has caused a drastic change in habitat matrix in many European regions. We investigated the effect of such change on populations of three newt species (   Triturus helveticus , T. alpestris , and T. cristatus ) by comparing their abundances in sites that varied in amount of cultivated ground. A multivariate regression analysis of the relationship of newt abundance to both pond and landscape variables demonstrated the negative influence of cultivated ground on abundance. The width of the uncultivated sector linking the pond to the forest was a good predictor of abundance after the influences of both pond area and fish presence were removed. Moreover, newt presence was positively related to the number of ponds within that 50-ha surrounding area, highlighting the role of metapopulation functioning in newt occupancy of ponds. The relationship between newt abundance and width of uncultivated sectors agrees with present knowledge of the orientation mechanisms that underlie migration movements in urodeles. Such a relationship between connectedness and sector width shows that narrow, linear corridors such as hedgerows may not be useful in newt conservation. Our study also highlights the need to incorporate a behavioral component of habitat use into models of connectivity in conservation biology.     

Influence of fly ash aided phytostabilisation of Pb, Cd and Zn highly contaminated soils on Lolium perenne and Trifolium repens metal transfer and physiological stress

Due to anthropogenic activities, large extends of soils are highly contaminated by Metal Trace Element (MTE). Aided phytostabilisation aims to establish a vegetation cover in order to promote in situ immobilisation of trace elements by combining the use of metal-tolerant plants and inexpensive mineral or organic soil amendments. Eight years after Coal Fly Ash (CFA) soil amendment, MTE bioavailability and uptake by two plants, Lolium perenne and Trifolium repens, were evaluated, as some biological markers reflecting physiological stress. Results showed that the two plant species under study were suitable to reduce the mobility and the availability of these elements. Moreover, the plant growth was better on CFA amended MTE-contaminated soils, and the plant sensitivity to MTE-induced physiological stress, as studied through photosynthetic pigment contents and oxidative damage was lower or similar. In conclusion, these results supported the usefulness of aided phytostabilisation of MTE-highly contaminated soils.     

Predictions of U.K. regulated power station contributions to regional air pollution and deposition: a model comparison exercise

Contributions of the emissions from a U.K. regulated fossil-fuel power station to regional air pollution and deposition are estimated using four air quality modeling systems for the year 2003. The modeling systems vary in complexity and emphasis in the way they treat atmospheric and chemical processes, and include the Community Multiscale Air Quality (CMAQ) modeling system in its versions 4.6 and 4.7, a nested modeling system that combines long- and short-range impacts (referred to as TRACK-ADMS [Trajectory Model with Atmospheric Chemical Kinetics-Atmospheric Dispersion Modelling System]), and the Fine Resolution Atmospheric Multi-pollutant Exchange (FRAME) model. An evaluation of the baseline calculations against U.K. monitoring network data is performed. The CMAQ modeling system version 4.6 data set is selected as the reference data set for the model footprint comparison. The annual mean air concentration and total deposition footprints are summarized for each modeling system. The footprints of the power station emissions can account for a significant fraction of the local impacts for some species (e.g., more than 50% for SO2 air concentration and non-sea-salt sulfur deposition close to the source) for 2003. The spatial correlation and the coefficient of variation of the root mean square error (CVRMSE) are calculated between each model footprint and that calculated by the CMAQ modeling system version 4.6. The correlation coefficient quantifies model agreement in terms of spatial patterns, and the CVRMSE measures the magnitude of the difference between model footprints. Possible reasons for the differences between model results are discussed. Finally, implications and recommendations for the regulatory assessment of the impact of major industrial sources using regional air quality modeling systems are discussed in the light of results from this case study.     

Tributary Plunging in an Urban Lake (Onondaga Lake): Drivers,Signatures, and Implications1

Abstract: A combination of long‐term fixed‐frequency and robotic monitoring information for a polluted urban lake, Onondaga Lake, New York, and two of its tributaries is used to resolve the propensity for, and occurrences of, tributary plunging. Cooler temperatures (T) and higher salinity (S) are primarily responsible for the elevated density and plunging of one of these polluted streams for the summer through early fall interval. In‐lake transport of this plunging tributary, which receives inputs from combined sewer overflows (CSOs), is tracked by its high S during dry weather, its high turbidity (T_n) with associated lower S (dilution with rainwater) following runoff events, and by its characteristic ionic composition. These signatures are documented extending from the creek mouth, through a connecting navigation channel, through the inflow zone of the lake, and into metalimnetic depths of pelagic portions of the lake. The entry of this polluted tributary below the depth interval(s) of primary production and contact recreation has important implications for the ongoing major rehabilitation program for this lake. The plunging phenomenon diminishes the benefits previously expected for related features of the lake’s water quality from ongoing management efforts to abate CSO inputs and reduce nonpoint nutrient loading from the tributary. Previously this tributary tended to instead enter the upper layers of the lake during the operation of an adjoining soda ash manufacturing facility (closure in 1986), as a result of high lake S caused by the industry’s ionic waste discharge.     

Taming the Unruly Side of Ethics: Overcoming Challenges of a Bottom-Up Approach to Ethics in the Areas of Food Policy and Climate Change

Here, I investigate the challenges involved in addressing ethical questions related to food policy, food security, and climate change in a public engagement atmosphere where “experts” (e.g., scientists and scholars), policy-makers and laypersons interact. My focus is on the intersection between food and climate in the state of Alaska, located in the circumpolar north. The intersection of food security and climate represents a “wicked problem.” This wicked problem is plagued by “unruliness,” characterized by disruptive mechanisms that can impede how ethical issues in policy-making are broached. Unruliness is exacerbated by conditions of engagement that can be characterized as occurring in a “fog.” In this fog, interlocutors encounter both moral and epistemological conundrums. In considering how to mitigate unruliness, a bottom-up approach is recommended. I discuss “taming” strategies for addressing these ethical concerns; modest suggestions on what should be taken into count when confronting issues of science and ethics within the context of promoting greater deliberative discourse regarding food security issues at more local levels. My recommendations are made in light of developments in food policy in Alaska and may be instructive for other regions pursuing cold climate agricultural expansion, for example.     

The Population Ecology of Two Tropical Trees, Brachychiton diversifolius (Malvaceae) and Bombax ceiba (Bombaceae), Harvested by Indigenous Woodcarvers in Arnhem Land, Australia

We describe the population ecology of two tropical deciduous trees, Bombax ceiba leiocarpum A. Robyns and Brachychiton diversifolius R. Br., which are in high demand for Indigenous sculpture production in Arnhem Land, Australia. We monitored tagged populations of both species at two locations for 2?years to examine their reproduction, growth, and survival rates and their response to harvest. Both species have similar life histories: they reproduce during the dry season (June-November) producing a high seed load, seed predation was high, seeds did not survive in the soil past the following wet season to form a seed bank, and germination rates were low and variable for both species. Average annual circumference growth rates were 1.07?cm?year(-1) for B. ceiba and 0.98?cm?year(-1) for B. diversifolius, with most of the growth occurring during the early wet season. Most (65-88?%) of the harvested B. ceiba and B. diversifolius stems coppiced. Coppice and stem size class were the main factors influencing tree growth rates with coppice stems growing up to six times faster than similar sized non-coppice stems. The survival of B. ceiba and B. diversifolius stems was size class dependent and affected by local site factors (e.g. fire and other disturbances) so that the smaller size classes had a low probability of survival. Given the resprouting potential of both species, their wild harvest is likely to have only minimal local impact on wild populations. However, further population modelling is required to determine whether the small and disjunct B. ceiba populations can sustain harvesting at current levels.     

Long-term copper partitioning of metal-spiked sediments used in outdoor mesocosms

Understanding the effects of sediment contaminants is pivotal to reducing their impact in aquatic environments. Outdoor mesocosms enable us to decipher the effects of these contaminants in environmentally realistic scenarios, providing a valuable link between laboratory and field experiments. However, because of their scale, mesocosm experiments are often complex to set up and manage. The creation of environmentally realistic conditions, particularly when using artificially contaminated sediment, is one issue. Here, we describe changes in geochemistry over 1.5 years of a sediment spiked with four different concentrations of copper, within a large freshwater mesocosm facility. The spiking procedure included proportional amendments with garden lime to counteract the decreases in pH caused by the copper additions. The majority of copper within the spiked mesocosm sediments partitioned to the particulate phase with low microgram per liter concentrations measured in the pore waters and overlying waters. The minimum partition coefficient following equilibration between pore waters and sediments was 1.5?×?10⁴ L/kg, which is well within the range observed for field-contaminated sediments (1?×?10⁴ to 1?×?10⁶ L/kg). Recommendations are made for the in situ spiking of sediments with metals in large outdoor mesocosms. These include selecting an appropriate sediment type, adjusting the pH, allowing sufficient equilibration time, and regular mixing and monitoring of metal partitioning throughout the experimental period.     

Comparative study of non-invasive methods for assessing Daphnia magna embryo toxicity

Embryos, unlike adults, are typically sessile, which allows for an increase in the available metrics that can be used to assess chemical toxicity. We investigate Daphnia magna development rate and oxygen consumption as toxicity metrics and compare them to arrested embryo development using four different techniques with potassium cyanide (KCN) as a common toxicant. The EC₅₀ (95 % CI) for arrested development was 2,535 (1,747–3,677) μg/L KCN. Using pixel intensity changes, recorded with difference imaging, we semi-quantitatively assessed a decrease in development rate at 200 μg/L KCN, threefold lower than the arrested development lowest observed effect concentration (LOEC). Respirometry and self-referencing (SR) microsensors were two unique techniques used to assess oxygen consumption. Using respirometry, an increase in oxygen consumption was found in the 5 μg/L KCN treatment and a decrease for 148 μg/L, but no change was found for the 78 μg/L KCN treatment. Whereas, with SR microsensors, we were able to detect significant changes in oxygen consumption for all three treatments: 5, 78, and 148 μg/L KCN. While SR offered the highest sensitivity, the respirometry platform developed for this study was much easier to use to measure the same endpoint. Oxygen consumption may be subject to change during the development process, meaning consumption assessment techniques may only be useful only for short-term experiments. Development rate was a more sensitive endpoint though was only reliable four of the six embryonic developmental stages examined. Despite being the least sensitive endpoint, arrested embryo development was the only technique capable of assessing the embryos throughout all developmental stages. In conclusion, each metric has advantages and limitations, but because all are non-invasive, it is possible to use any combination of the three.     

Charcoal burning as a source of polyaromatic hydrocarbons in waterpipe smoking

Polyaromatic hydrocarbons (PAH) content from seven commercial waterpipe charcoals were determined during the smoking process to estimate how much PAHs would not be trapped by the water trap and could reach the lungs of the smokers. Naphthalene, 2-methylnaphthalene, acenaphthylene, acenaphthene, phenanthrene and fluoranthene were the most abundant PAH compounds produced during smoking. Naphthalene was the highest in all of the smoke contents and levels of 5 to 405 μg/15 minutes could be inhaled by the smoker. The amounts of PAHs produced during the smoking events in absence of tobacco varied greatly among different brands of charcoal. The amount and composition of the emitted PAH were not related to the amount and composition of the original chemicals in the charcoal prior to burning. Our findings suggest that public health agencies should regulate smoked charcoal products alongside tobacco.