Physicochemical quality of an urban municipal wastewater effluent and its impact on the receiving environment

The physicochemical qualities of the final effluents of an urban wastewater treatment plant in South Africa were assessed between August 2007 and July 2008 as well as their impact on the receiving watershed. The pH values across all sampling points ranged between 6.8 and 8.3, while the temperature varied from 18°C to 25°C. Electrical conductivity (EC) of the samples was in the range of 29–1,015 μS/cm, and turbidity varied between 2.7 and 35 NTU. Salinity and total dissolved solids (TDS) varied from 0.36 to 35 psu and 16 to 470 mg/L, respectively. The concentrations of the other physicochemical parameters are as follows: chemical oxygen demand (COD, 48–1,180 mg/L); dissolved oxygen (DO, 3.9–6.6 mg/L); nitrate (0.32–6.5 mg NO $_{3}^{-}$ as N/L); nitrite (0.06–2.4 mg NO $_{2}^{-}$ as N/L); and phosphate (0.29–0.54 mg PO $_{4}^{3-}$ as P/L). pH, temperature, EC, turbidity, TDS, DO, and nitrate varied significantly with season and sampling point (P?<?0.05 and P?<?0.01, respectively), while salinity varied significantly with sampling point (P?<?0.01) and COD and nitrite varied significantly with season (P?<?0.05). Although the treated effluent fell within the recommended water quality standard for pH temperature, TDS, nitrate and nitrite, it fell short of stipulated standards for other parameters. The result generally showed a negative impact of the discharged effluent on the receiving watershed and calls for a regular and consistent monitoring program by the relevant authorities to ensure best practices with regard to treatment and discharge of wastewater into the receiving aquatic milieu in South Africa.     

Pesticide occurrence in groundwater and the physical characteristics in association with these detections in Ireland

This study explores the associations of pesticide occurrence in groundwater to geological characteristics of the monitoring points (MPs) contributing area. Pesticide analyses were undertaken during a 2-year groundwater monitoring campaign which generated 845 samples. MCPA and mecoprop were the most frequently detected pesticides in groundwater. Each MP (n?=?158) had a specifically delineated zone of contribution (ZOC) and the dominant physical characteristics present from nine national datasets were recorded for each ZOC. Associations between detections in groundwater and the dominant physical characteristic in each MPs ZOC tested were then statistically analyzed using Fisher’s exact test, logistic regression, and multiple logistic regression. The original physical characteristic datasets used that were associated with detections in groundwater were the type of MP, aquifer type, and Quaternary deposit type. Logistic regression revealed that springs, regionally important aquifer types, aquifers with a karstic flow regime, and alkaline Quaternary deposits in existence above karst aquifers in a MP’s ZOC were more likely to have a pesticide detection in groundwater. Multiple regression from this exploratory work showed some mutual dependency between soil association, aquifer type, and the Geological Survey of Ireland groundwater vulnerability map. The combination of national monitoring data and physical attribute datasets can be used to explore key areas where groundwater is more vulnerable to pesticide contamination.     

Water quality associated public health risk in Bo, Sierra Leone

Human health depends on reliable access to safe drinking water, but in many developing countries only a limited number of wells and boreholes are available. Many of these water resources are contaminated with biological or chemical pollutants. The goal of this study was to examine water access and quality in urban Bo, Sierra Leone. A health census and community mapping project in one neighborhood in Bo identified the 36 water sources used by the community. A water sample was taken from each water source and tested for a variety of microbiological and physicochemical substances. Only 38.9% of the water sources met World Health Organization (WHO) microbial safety requirements based on fecal coliform levels. Physiochemical analysis indicated that the majority (91.7%) of the water sources met the requirements set by the WHO. In combination, 25% of these water resources met safe drinking water criteria. No variables associated with wells were statistically significant predictors of contamination. This study indicated that fecal contamination is the greatest health risk associated with drinking water. There is a need to raise hygiene awareness and implement inexpensive methods to reduce fecal contamination and improve drinking water safety in Bo, Sierra Leone.     

Climate Change and Climate Variability: Adaptations to Reduce Adverse Health Impacts

Global climate change is likely to have a range of consequences for human health as a result of disturbance or weakening of the biosphere's natural or human-managed life support systems. The full range of potential human health impacts of global climate change is diverse and would be distributed differentially spatially and over time. Changes in the mortality toll of heatwaves and changes in the distribution of vector-borne infectious diseases may occur early. The public health consequences of sea level rise and of regional changes in agricultural productivity may not occur (or become apparent) for several decades. Vulnerability is a measure of both sensitivity to climate change and the ability to adapt in anticipation of, or in response to, its impacts. The basic modes of adaptation to climate-induced health hazards are biological, behavioural and social. Adaptation can be undertaken at the individual, community and whole-population levels. Adaptive strategies should not introduce new health hazards. Enhancement of the acknowledged public health infrastructure and intervention programmes is essential to reduce vulnerability to the health impacts of climate change. In the longer-term, fundamental improvements in the social and material conditions of life and in the reduction of inequalities within and between populations are required for sustained reduction in vulnerability to environmental health hazards.     

Adaptive nitrogen and integrated weed management in conservation agriculture: impacts on agronomic productivity,greenhouse gas emissions,and herbicide residues

Increasing nitrogen (N) immobilization and weed interference in the early phase of implementation of conservation agriculture (CA) affects crop yields. Yet, higher fertilizer and herbicide use to improve productivity influences greenhouse gase emissions and herbicide residues. These tradeoffs precipitated a need for adaptive N and integrated weed management in CA-based maize (Zea mays L.)—wheat [Triticum aestivum (L.) emend Fiori & Paol] cropping system in the Indo-Gangetic Plains (IGP) to optimize N availability and reduce weed proliferation. Adaptive N fertilization was based on soil test value and normalized difference vegetation index measurement (NDVM) by GreenSeeker? technology, while integrated weed management included brown manuring (Sesbania aculeata L. co-culture, killed at 25 days after sowing), herbicide mixture, and weedy check (control, i.e., without weed management). Results indicated that the ‘best-adaptive N rate’ (i.e., 50% basal + 25% broadcast at 25 days after sowing + supplementary N guided by NDVM) increased maize and wheat grain yields by 20 and 14% (averaged for 2 years), respectively, compared with whole recommended N applied at sowing. Weed management by brown manuring (during maize) and herbicide mixture (during wheat) resulted in 10 and 21% higher grain yields (averaged for 2 years), respectively, over the weedy check. The NDVM in-season N fertilization and brown manuring affected N₂O and CO₂ emissions, but resulted in improved carbon storage efficiency, while herbicide residuals in soil were significantly lower in the maize season than in wheat cropping. This study concludes that adaptive N and integrated weed management enhance synergy between agronomic productivity, fertilizer and herbicide efficiency, and greenhouse gas mitigation.     

Acceptable Cancer Risks: Probabilities and Beyond

The acceptability of cancer risk requires consideration of factors that extend beyond mere numerical representations, such as either individual lifetime risk in excess of background and excess incidence. Recently, use of these numbers has been tempered by the addition of qualitative weights-of-evidence that describe the degree of support provided by animal and epidemiologic results. Nevertheless, many other factors, most of which are not quantitative, require incorporation but remain neglected by the analyst eager to use quantitative results.

In this paper we show that simple risk measures are often fraught with problems. Moreover, these measures do not incorporate the very essence of acceptability, which includes notions of responsibility, accountability, equity, and procedural legitimacy, among others. We link the process of risk assessment to those legal and regulatory standards that shape it. These standards are among the principal means to resolve risk-related disputes and to enhance the balancing of competing interests when science and law meet on uncertain and often conjectural ground.

We conclude the paper with a proposal for the portfolio approach to manage cancer risks and to deal with uncertain scientific information. This approach leads to the concept of "provisional acceptability," which reflects the choices available to the decisionmaker, and the trade-offs inherent to such choices.     

A Comparative Study of Environmental Tobacco Smoke Particulate Mass Measurements in an Environmental Chamber

Particulate mass concentration measurements have been made on environmental tobacco smoke (ETS) for the purpose of assessing the relative accuracy of several measurement procedures. ETS over a range of concentrations was generated in an environmental chamber by three methods. Mass concentration was measured by a gravimetric/spectrophotometric collection procedure, piezoelectric particle mass monitors, two nephelometry-based mass monitors, and a particle counting and sizing system. Two-hour average mass concentrations were determined by each method for concentrations ranging from very low levels up to those achieved by smoking one entire cigarette in the chamber. Statistical comparisons were made among procedures employing the gravimetric filter measurement as the basis for comparison. One nephelometry-based procedure gave significantly higher and the other significantly lower values than the filter determination. In one case, a correction for the difference between the particle mass density of the calibrating aerosol and that of ETS brought the nephelometry-based procedure into reasonable agreement with the filter measurement, while for the other, the correction did not resolve the discrepancy between methods. Statistically significant differences between the responses of two supposedly identical piezoelectric mass monitors were found, as was some slight dependence of the nephelometry- based procedures on method of ETS generation. In summary, the results indicate that significant errors can be expected if the instruments studied are used “off the shelf,” even for ETS generated under controlled laboratory conditions. Caution should be employed in field measurements where numerous sources and types of particulate matter can be encountered.     

Mercury Balance on a Large Pulverized Coal-Fired Furnace

This paper presents results of a survey of mercury concentrations in coal, ash, water, fly ash, and flue gas discharges from a 5.5 × 10⁶ Ib/hr steam generator serving a 775 MW (net) turbine-generator set. Representative composite or grab samples were obtained for inlet coal and outlet ash and water. Stack samples were obtained for fly ash and mercury vapor emissions while the unit was operated at 660 MW (net) (85% of full load). Samples were analyzed by anodic stripping voltammetry, plasma emission spectroscopy, and neutron activation analysis to determine mercury concentration entering the furnace in the coal and leaving the furnace in the flue gas, fly ash, bottom and hopper ash, and water. Method inter-comparisons are discussed. A material balance for mercury has been calculated from fuel, ash, and stack gas flow rates. About 90% of the mercury in the coal is released and appears as vapor discharged in the stack gas while 10% remains in the residual ash. For a 700 MW (net) unit, about 5 lb/day of mercury vapor is released to the atmosphere.     

The Medina Model: Advanced Vocational Environmental Education

For years educators have been striving for vocational realism in the classroom, that is, an in vivo work training program. Drawbacks to this system, however, have been student attitudes and conceptions of the nature of the programs. To the student population, vocational programs resembled the usual stereotype “school.” The solution to this problem was not simple. In order to achieve a real life simulation of work, teachers would need to grant additional freedom to students, which presents a calculated risk to the student and the instructor.