Occurrence of pesticides in surface water bodies: a critical analysis of the Italian national pesticide survey programs

In recent years, several monitoring programs have been established as a consequence of EU Directives which include requirements for monitoring the quality of water resources (drinking water, groundwater and surface water). Plant protection products (PPPs) are an obvious target for monitoring activities, since they are directly released into the environment. In Italy, the National Environmental Protection Agency (ISPRA ex APAT) has recently published two reports containing the results of the National Plans for Control of Environmental Effects of PPP. These documents contain the collection of monitoring data related to the presence of PPP residues in surface water and groundwater. The first objective of this work was to critically analyze the results of monitoring campaigns on pesticide residues in surface waters in Italy. In particular, the paper focuses on whether and how the Italian approach satisfies the requirements of the Water Framework Directive, whether they are representative of the whole national territory, and how the utilized approach is appropriate for the characterization of risk to surface water. Starting from this analysis, some considerations about the limits of environmental monitoring as a tool for managing risk were highlighted.     

Optimization of a multielement sequential extraction method employing an experimental design approach for metal partitioning in soils and sediments

The optimisation of a simple multielement extraction method employing an experimental design approach is described. The method uses centrifugation to pass one extractant solution at varying pH through a contaminated soil sample. The nature and concentration of the acid, rate of centrifugation and time, number of sequential leachates and the ratio of extractant volume: sample weight have been studied in order to obtain the optimum conditions for extraction. A fractional factorial experimental design was performed, and the results were used to identify significance which was then evaluated by carrying out a central composite experimental approach. Once optimum conditions had been obtained, sequential leaches were analysed by ICP-AES and chemometrics were employed to identify the composition of each component. Comparisons have been made with previous studies and tentative assignments, based on well defined separated fractions and percentage compositions for individual elements, used to identify the different physico-chemical components in the sample.     

Assessing reliable indicators to sewage pollution in coastal soft-bottom communities

Physicochemical characteristics of sediment and benthic communities were studied in the proximity of seven sewage outfalls with differences in flow and wastewater treatment in the Western Mediterranean Sea. Redox potential was the only abiotic parameter which showed a pattern related with distance to outfalls, whereas granulometry, percentage of organic matter, metal concentrations or pH did not show changes related with outfall presence. Benthic community analysis proved to be the most suitable monitoring tool. The results showed that the highest impacted stations corresponded with those closest to outfall with the highest flow and only pre-treatment, whilst a decrease of this tendency was detected in the locations where secondary treatment takes place. Meta-analysis showed a decrease of amphipods and tanaids abundance as well as redox potential, as the indicators with the clearest response to sewage presence.     

Climate change effect on outdoor ambiences in Iranian cities

In present research work the effect of climate change over the humidex in Iran is analyzed. From this research, we can conclude that the PD_IAQ index showed a special sensibility to changes in temperature and relative humidity, hence, it can be an interesting tool, may be even better than the humidex to show the expected effect of climate change in perception of air quality. Thus, it was found that the humidex expected in the future will be more elevated than that in the preceding period and, on the other hand, the PD_WRC has clearly reached a lower value than in the preceding period. The same effects, other than those using the earlier indexes in a more detailed manner, were observed with the PD_IAQ. This index showed a higher sensitivity to variations in temperature and relative humidity, than the humidex. Finally, the main results obtained must be considered at the time of design and during construction of future buildings, since buildings that are being constructed today will be occupied in the future years of the 2100s.     

Multivariate analyses of the effect of an urban wastewater treatment plant on spatial and temporal variation of water quality and nutrient distribution of a tropical mid-order river

Freshwater resources are increasingly scarce due to human activities, and the understanding of water quality variations at different spatial and temporal scales is necessary for adequate management. Here, we analyze the hypotheses that (1) the presence of a wastewater treatment plant (WWTP) and (2) a polluted tributary that drains downstream from the WWTP change the spatial patterns of physicochemical variables (pH, turbidity, dissolved oxygen, and electrical conductivity) and nutrient concentrations (reactive soluble phosphorus, total phosphorus, nitrogen series, total nitrogen, and total dissolved carbon) along a mid-order river in SE Brazil and that these effects depend on rainfall regime. Six study sites were sampled along almost 4 years to evaluate the impacts of human activities, including sites upstream (1–3) and downstream (5–6) from the WWTP. The impacts were observed presenting an increasing trend from the source (site 1) towards Água Quente stream (site 4, the polluted tributary), with signs of attenuation at site 5 (downstream from both WWTP and site 4) and the river mouth (site 6). Input of nutrients by rural and urban runoff was observed mainly at sites 2 and 3, respectively. At sites 4 and 5, the inputs of both untreated and treated wastewaters increased nutrient concentrations and changed physicochemical variables, with significant impacts to Monjolinho River. Seasonal variations in the measured values were also observed, in agreement with the pluviometric indexes of the region. Univariate analyses suggested no effect of the WWTP for most variables, with continued impacts at sites downstream, but non-parametric multivariate analysis indicated that these sites were recovering to chemical characteristics similar to upstream sites, apparently due to autodepuration. Therefore, multivariate methods that allow rigorous tests of multifactor hypotheses can greatly contribute to determine effects of both point and non-point sources in river systems, thus contributing to freshwater monitoring and management.     

The spatial statistics formalism applied to mapping electromagnetic radiation in urban areas

Determining the electromagnetic radiation levels in urban areas is a complicated task. Various approaches have been taken, including numerical simulations using different models of propagation, sampling campaigns to measure field values with which to validate theoretical models, and the formalism of spatial statistics. In the work, we present here that this latter technique was used to construct maps of electric field and its associated uncertainty from experimental data. For this purpose, a field meter and a broadband probe sensitive in the 100-kHz–3-GHz frequency range were used to take 1,020 measurements around buildings and along the perimeter of the area. The distance between sampling points was 5 m. The results were stored in a geographic information system to facilitate data handling and analysis, in particular, the application of the formalism of spatial statistical to the analysis of the distribution of the field levels over the study area. The spatial structure was analyzed using the variographic technique, with the field levels at non-sampled points being interpolated by kriging. The results indicated that, in the urban area analyzed in the present work, the linear density of sampling points could be reduced to a distance which coincides with the length of the blocks of buildings without the statistical parameters varying significantly and with the field level maps being reproduced qualitatively and quantitatively.     

The potential for improvements in energy efficiency and CO2 emissions in the EU27 cement industry and the relationship with the capital budgeting decision criteria

This paper performs a cost-effectiveness analysis of some of the best available technologies (BAT) that can contribute to decreasing the energy consumption and CO₂ emissions in the European Union’s (EU27) cement industry. Several capital budgeting decision criteria have been used (the payback period, the net present value and the internal rate of return) to study whether or not an investment should be considered worthwhile. The results show that, independent of the capital budgeting decision criteria used, the number of cost-effective retrofitting possibilities available is large compared to the rate of improvements that the industry undertakes annually. This shows the insensitivity of the industry to financial criteria when it comes to making their investment decisions. The possible thermal energy improvement in the clinker production, if all these BATs were implemented, has been quantified to be around 10%. This achievement would place the cement industry in the upper bound of the benchmark range for clinker manufacture. However considering the delays observed nowadays in terms of diffusion of BATs in the cement industry, it requires a conducive policy environment that combines support for both technology development and to their deployment.     

Promoting late-fall establishment of tall fescue with artificial soil covers to minimise soil erosion

Frequently, turfgrass seedings have been sown in the late fall, which usually results in a poor vegetative stand and the possibility of soil erosion the following spring. This study evaluates the effects of a spun-bonded polyester soil cover placed over a late-fall seeding on subsequent seedling growth and overwintering. Clemfine, Mustang, Rebel, and Rebel II cultivars of tall fescue (Festuca arundinacea Schreb.) were sown on a silt loam soil in late fall (on 17 October in 1989 and 19 October in 1990) and allowed to grow with and without a soil cover until June. In the spring the temperature under the soil cover was greater than 2°C warmer than the uncovered soil from mid-April through May. Over the winter, leaf and root weights showed no detrimental effects from being under the cover. Individual cultivars grown under the cover produced 2 to 11 times greater leaf yields and 38 to 270% better stand establishment than those sown on the exposed soil. However, plant winter injury was observed under the soil cover in small soil depressions which accumulated water originating from thawing. All cultivars had similar amounts of growth under the cover. However, leaf yields for Rebel were 30-55% less than the other cultivars when grown under the cover and this was probably related to a low seed germination rate. The covers also promoted weed growth, which comprised from 34–65% of total leaf weights and was found to be negatively correlated (r = –0.66) to the yields of the sown grass. The soil cover was found to be beneficial to improving the success of seedling establishment of late seedings of tall fescue in cold areas.