Growth and yield response of marigold to potting media containing vermicompost produced from different wastes

Investigations were made to assay the influence of vermicomposts, prepared from (i) cow dung (CD) and (ii) sugar mill wastewater treatment plant sludge spiked with horse dung, on the growth and productivity of marigold plants in pot culture experiments. The soil was used as potting media, and vermicomposts were amended with it in 10, 20, 30 and 40% ratio. A total of nine different potting media were prepared. The fertility status of soil and vermicomposts was quantified. There were significant differences in the fertilizer quality of soil and both the vermicomposts. Maximum numbers of flowers was produced in the potting media containing 30% of CD vermicompost and minimum was reported in control (soil without amendments). The diameter of biggest flower was reported in the potting media containing 40% of sugar mill wastewater treatment plant sludge vermicompost. Results showed that the addition of vermicompost, in appropriate quantities, to potting media has synergistic effects on growth and flowering of plants including number of buds, number of flowers, plant shoot biomass, root biomass, plant height and diameter of flowers.     

Survey of nitrogen use pattern in rice in the irrigated rice-wheat cropping system of Haryana, India

Seeing the sustainability of rice-wheat cropping system (RWCS) of the Indo-Gangetic Plain, adequate crop nutrition in general and nitrogen (N) in particular holds the key to sound crop management. The excessive application or insufficient management of N means an economic loss to the farmer and may lead to yield penalties and environmental problems. Improving N management in consonance with other nutrients is much important to break yield plateaus as breeding for high yielding is not happening in recent years. Findings from farm survey are used to evaluate the on-farm N management practices in rice crop of the study area. The crop management practices (especially time of sowing/transplanting and irrigation requirement) and resource base of the farmers decided the N use pattern of the farmers. The N(Physical optimum) and N(economic optimum) exceeding the recommended levels revealed the apparent need for the revalidation of the existing recommendations. Paddy yield increased significantly within different rice types. This study generated comprehensive data on N use pattern in rice in the study area.     

Catalytic oxidative treatment of diluted black liquor at mild conditions using copper oxide/cerium oxide catalyst.

Wet-air oxidation of diluted black liquor (chemical oxygen demand [COD] approximately 3250 to 14 500 mg/L) was performed at mild operating conditions (temperature = 388 to 423 K and total pressure = 0.6 MPa) in the presence of heterogeneous 60% copper oxide (CuO)/ 40% cerium oxide (CeO2) catalyst. Maximum COD reduction of 77.3% was obtained at 423 K at pH 3.0, which was marginally higher than that obtained at 413 K temperature (77.1%). In the acidic environment (pH < or = 3), most of the COD was removed in the form of settleable solids during the transient heating of the wastewater from room temperature to the desired one. The solid residue obtained after the reaction has a heating value of 20.1 MJ/kg, which is comparable with that of Indian coal. Thermal degradation kinetic determination suggested that thermal characteristics of the solid residue are well represented by a power law model with Agarwal and Sivasubramanian approximation (Safi et al., 2004).     

Composting and bioremediation process evaluation of wood waste materials generated from the construction and demolition industry

The suitability of using bioremediation and composting techniques for diverting construction and demolition (C&D) waste from landfill has been validated in this study. Different timber products from C&D waste have been composted using various composting approaches. The present work demonstrates the quality of compost produced as a result of composting of mixed board product wood waste, which is frequently obtained from the construction and demolition industry. Three compost mixes were prepared by mixing shredded chip board, medium density fibre, hardboard and melamine. Poultry manure, Eco-Bio mixture and green waste were used as nutrient supplements. The results revealed that compost produced from mixtures of poultry manure and green waste used as nutrient supplements improved the performance in plant growth trials (phytotoxicity tests). Results obtained from the experimental study clearly indicate that the composts produced comply with the criterion suggested in BSI PAS 100 (A specification for compost materials) for use in different applications. Composting can also be demonstrated to be a very practical approach to material management including transport reduction to and from the site. The economic suitability of the process will be improved with the increase in landfill tax. In the current regulatory scenario, it is recommended that these materials should be composted at a centralised facility.     

Influence of different nitrogen rich supplements during cultivation of <Emphasis Type="Italic">Pleurotus </Emphasis><Emphasis Type="Italic">florida</Emphasis> on corn cob substrate

The cultivation of white rot edible fungus Pleurotus florida was performed in polybags. The corn cob was employed as basal substrate while eight different additives such as urea, ammonium sulphate, gram flour, soybean meal, ground nut cake and molasses were used with corn cob. Three different levels of variable combinations with corn cob were evaluated in response to different parameters of mushroom viz., mycelial growth, spawn running, primordial initiation, fruit body yield and its biological efficiency. Each additive at different combinations showed variable impact on the different stages of mushroom life cycle. The primordial initiation was observed for the first time during 20.2–35.1 days. The biological efficiencies in every supplemented set were increased over un-supplemented control set. Increasing the level of additives, the biological efficiency was negatively affected at higher levels. The cotton seed cake was found the best supplement producing 93.75% biological efficiency while soybean meal was the second best additive producing 93.00% yield. The highest growth rate, rapid mycelia run, early primordial initiation, highest yield and biological efficiency were recorded in the combination of corn cob and cotton seed cake at 2% (98 + 2) level.     

GIS-based hazard and vulnerability assessment of a torrential watershed

Environment, Development and Sustainability - Torrents are ephemeral streams which usually carry heavy bedload and flash flows. The frequent changes in its course caused by meandering and migration...     

Arsenic toxicity in crop plants: physiological effects and tolerance mechanisms

Heavy metals are toxic substances released into the environment, contributing to a variety of toxic effects on living organisms in food chain by accumulation and biomagnifications. Certain pollutants such as arsenic (As) remain in the environment for an extensive period. They eventually accumulate to levels that could harm physiochemical properties of soils and lead to loss of soil fertility and crop yield. Arsenic, when not detoxified, may trigger a sequence of reactions leading to growth inhibition, disruption of photosynthetic and respiratory systems, and stimulation of secondary metabolism. Plants respond to As toxicity by a variety of mechanisms including hyperaccumulation, antioxidant defense system, and phytochelation. Arbuscular mycorrhizae symbiosis occurs in almost all habitats and climates, including disturbed soils. There is growing evidence that arbuscular mycorrhizae fungi may alleviate metal/metalloid toxicity to host plant. Here, we review (1) arsenic speciation in the environment and how As is taken up by the roots and metabolised within plants, and (2) the role of arbuscular mycorrhizae in alleviating arsenic toxicity in crop plants.     

Future Greenhouse Gas and Local Pollutant Emissions for India: Policy Links and Disjoints

This paper estimates the future greenhousegas (GHG) and local pollutant emissions forIndia under various scenarios. Thereference scenario assumes continuation ofthe current official policies of the Indiangovernment and forecasts of macro-economic,demographic and energy sector indicators.Other scenarios analyzed are the economicgrowth scenarios (high and low), carbonmitigation scenario, sulfur mitigationscenario and frozen (development) scenario.The main insight is that GHG and localpollutant emissions from India, althoughconnected, do not move in synchronizationin future and have a disjoint under variousscenarios. GHG emissions continue to risewhile local pollutant emissions decreaseafter some years. GHG emission mitigationtherefore would have to be pursued for itsown sake in India. National energy securityconcerns also favor this conclusion sincecoal is the abundant national resource whilemost of the natural gas has to be imported.The analysis of contributing factors tothis disjoint indicates that sulfurreduction in petroleum oil products andpenetration of flue gas desulfurisationtechnologies are the two main contributorsfor sulfur dioxide (SO₂) mitigation.The reduction in particulate emissions ismainly due to enforcing electro-staticprecipitator efficiency norms in industrialunits, with cleaner fuels and vehicles alsocontributing substantially. These policytrends are already visible in India.Another insight is that high economicgrowth is better than lower growth tomitigate local pollution as lack ofinvestible resources limits investments incleaner environmental measures. Ouranalysis also validates the environmentalKuznets' curve for India as SO₂emissions peak around per capita GDP ofUS$ 5,300–5,400 (PPP basis) under variouseconomic growth scenarios.     

The dissolution of benzene, toluene, m-xylene and naphthalene from a residually trapped non-aqueous phase liquid under mass transfer limited conditions

The results of dissolution experiments for benzene, toluene, m-xylene and naphthalene (BTXN) from a relatively insoluble oil phase (tridecane), residually trapped in a non-sorbing porous medium, are described. This mixture was chosen to simulate dissolution of soluble aromatic compounds from a petroleum hydrocarbon mixture, e.g., crude oil, for which a large fraction of the mixture is relatively insoluble. The experiments were carried out at a small source length to interstitial velocity ratio, L/v, so that dissolution would be mass transfer limited (MTL). When fitted to data for toluene, a multiregion mass transfer model was found to predict the experimental data satisfactorily for the other components without adjustment of the mass transfer rate parameters. These results indicate that the dissolution process can be generalized for various hydrophobic organic compounds present in a multicomponent non-aqueous phase liquid (NAPL) when mass transfer limitations are present. This also suggests that dissolution data obtained for one compound can be useful for predicting the dissolution histories for other compounds from petroleum hydrocarbon mixtures.     

From climate change impacts to adaptation: A development perspective for India

India has good reasons to be concerned about climate change as it could adversely affect the achievement of vital national development goals related to socio‐economic development, human welfare, health, energy availability and use, and infrastructure. The paper attempts to develop a framework for integrated impact assessment and adaptation responses, using a recently built railroad coastal infrastructure asset in India as an example. The framework links climate change variables — temperature, rainfall, sea level rise, extreme events, and other secondary variables — and sustainable development variables — technology, institutions, economic, and other policies. The study indicates that sustainable development variables generally reduce the adverse impacts on the system due to climate change alone, except when they are inadequately applied. The paper concludes that development is a vital variable for integrated impact assessment. Well crafted developmental policies could result in a less‐GHG intensive future, enhanced adaptive capacities of communities and systems, and lower impacts due to climate change.