Comparison of zooplankton community of different areas in Changjiang River estuary北大核心CSCD

To compare the zooplankton communities in the South Branch, North Branch, North Channel and offshore of the Changjiang (Yangtze River) estuary, two cruises were carried out in the autumn of 2009 and the spring of 2010. A total of 27 species of zooplankton were identified in the spring, including 17 in the offshore, 11 in the south branch, 9 in the north branch, and only 5 in the North Channel. In autumn, altogether 71 species were collected, including 6 in the south branch, 11 in the north branch, 8 species in the North Channel area and 63 in the offshore. Either in the spring or autumn, the average species numbers of the offshore were the highest. Additionally, species numbers of the offshore were significantly higher than that in other areas (P < 0.05) for both seasons. There were no significant differences between the species number of the South Branch and the North Branch (P > 0.05). The species number and diversity index of the inner area were lower than that of the offshore. The average diversity index of offshore area was still the highest in both spring (1.69) and autumn (3.73). In spring, the diversity index of the North Channel was the lowest among four areas, while in autumn, that of the South Branch was the lowest (0.49). In spring, Sinocalanus sinensis was the dominant species of the South Branch, North'Branch and North Channel (> 50% of the total collection by number). The dominant species of offshore area were Tortanus vermiculus and Labidocera euchaeta. While in autumn, the dominant species were different for each area. In the South Branch, the most important species was S. dorrii (93.55% of the total collection by number). The main species was S. dorrii in the South Branch area, S. stenellus and T. vermiculusin in the North Branch and Subeucalanus subcrassus in the offshore (< 30% of the total collection by number). Numbers of species and diversity index seemed to vary among different areas of Changjiang estuary. The underline mechanisms of the regional variation in species number were mainly the salinity and suspended sediment concentrations. Generally speaking, zooplankton was more abundant in the polyhaline water. Diversity index was largely affected by both species number and abundance percentage. The zooplankton community was mainly influenced by the Changjiang diluted water and offshore water mass through affecting the salinity. In autumn, the Kuroshio flowed northward carrying polyhaline water, and brought subtropical species to the offshore of the Changjiang estuary. Since the North Channel is located in the estuarine turbidity zone, suspended sediment concentration of that area is higher than the other areas, which might limit the distribution of some species. To sum up, salinity is the most important factor causing the difference of zooplankton community among different areas in the Changjiang estuary. Besides, water masses and estuarine turbidity also influence the zooplankton community.     

Identification and assay of microbial fatty acids during co-composting of active sewage sludge with palm waste by TMAH-thermochemolysis coupled with GC-MS

The fatty acids of two composts of active sludge with palm tree waste were investigated by thermochemolysis coupled to gas chromatography-mass spectrometry. This method (tetramethylammonium hydroxide-pyrolysis-gas chromatography-mass spectrometry) allowed the direct determination of total fatty acids (analysed as fatty acid methyl esters: FAMEs) present in the organic matter of the samples without any separation procedures. Mixture A was 1/3 sludge+2/3 palm waste and mixture B was 1/2 sludge+1/2 palm waste. The level of FAMEs rose by 8.4–33.3% and 10.8–13.4% in mixtures A and B, respectively, after 6 months of co-composting. Branched FAMEs of bacterial origin (iC15:0) rose during the thermophilic phase, in mixture A the aC17:0/aC15:0 ratio increased during the co-composting process, also in mixture B the aC16:0/C16:0 ratio rose but only during the thermophilic phase. All the FAMEs identified showed a drop at the end of co-composting except for C18:0 and C16:0. The stabilisation phase was characterised by a significant rise in the length of the aliphatic chains; the carbon preference index thus increased at the end of the composting process, indicating that the final product was proportionally richer in fatty acids of plant origin.     

Variations of anthropogenic CO2 in urban area deduced by radiocarbon concentration in modern tree rings

Radiocarbon concentration in the atmosphere is significantly lower in areas where man-made emissions of carbon dioxide occur. This phenomenon is known as Suess effect, and is caused by the contamination of clean air with non-radioactive carbon from fossil fuel combustion. The effect is more strongly observed in industrial and densely populated urban areas. Measurements of carbon isotope concentrations in a study area can be compared to those from areas of clear air in order to estimate the amount of carbon dioxide emission from fossil fuel combustion by using a simple mathematical model. This can be calculated using the simple mathematical model. The result of the mathematical model followed in this study suggests that the use of annual rings of trees to obtain the secular variations of ¹⁴C concentration of atmospheric CO₂ can be useful and efficient for environmental monitoring and modeling of the carbon distribution in local scale.     

Performance of Fabric Filters on Cyclone Fired Boilers

This paper documents operation of reverse air fabric filters on Baltimore Gas and Electric’s C. P. Crane Units 1 and 2 cyclone boilers. Beginning immediately after startup, tubesheet pressure drop increased to high levels. Following stabilization with sonic horns and spare reverse air fans, an investigation was mounted. Diagnostic tools included both laboratory and slipstream pilot baghouses to determine cause and evaluate candidate methods of reducing pressure drop. Fundamental ash properties determined through laboratory pilot testing were in conformance with predictions. Alternate fabrics and coatings did not eliminate the problem. The root cause of the problem was that the amount of variable cake, i.e. that ash removed during cleaning, plays an important role in the dynamics of bag cleaning. These dynamics were absent in the C. P. Crane filters. Confirmation was obtained in the full scale baghouse through modification of the variable cake weight using ash reinfection. Finally, offsetting pressure drop and power consumption reductions have been obtained to achieve satisfactory operation of the baghouses.     

Assessing the recycling potential of industrial wastewater to replace fresh water in concrete mixes: application of polyvinyl acetate resin wastewater

This study presents the use of industrial wastewater released from polyvinyl acetate resin manufacturing plant to totally replace the fresh water in concrete composites. Seventy-two laboratory prepared concrete composites were tested to investigate the effect of using various PVAW/C ratios of 0.30, 0.35, 0.40, and 0.45 on the slump, compressive strength, flexural strength, and dry density of the concrete mixes. Results indicated a slight to moderate increase in compressive strength and hard density values compared to those of the control concrete made with fresh water at 7 and 28 day curing. On the contrary, a reduction in the slump values of the PVAW–concrete was observed compared to the slump of the control mixes. However, the slump values increased with increasing the PVAW/C ratios. On the other hand, the waste material leaching test revealed that none of the PVAW toxic constituents was detected. The findings of this work would form basic information for recycling PVAW in concrete mixes and indicate a potential alternative for diminution the adverse effects on the environment posed by the hazardous effluent of the polyvinyl acetate resin industry.     

Healthcare waste management in Algeria and Mostaganem department

Algeria as other developing countries faces an array of challenges for healthcare waste management. The management of healthcare waste is of major importance due to its public health risks and potential environmental hazards. Many efforts have been made by the government authorities in order to better manage the waste from healthcare facilities. However most healthcare facilities do not comply with the principles stated in Algerian legislation. A data study was made on 95 hospitals across the country, and the three health sectors of Mostaganem department (Mostaganem, Ain Tédles, and Sidi Ali) were surveyed. The yearly production of infectious healthcare waste in this Algerian department is estimated at 92 tons, which is 1.38% of the national waste production. This represents an average of 0.15 kg/bed/day, which is lower than the national value of 0.72 kg/bed/day. The total healthcare waste by sector ranges from 0.7 to 1.22 kg/bed/day, and healthcare waste comprises 16% of total waste, which is equal to the national percentage.     

Variation in arsenic,lead and zinc tolerance and accumulation in six populations of Pteris vittata L. from China

Arsenic, Pb and Zn tolerance and accumulation were investigated in six populations of Pteris vittata collected from As-contaminated and uncontaminated sites in southeast China compared with Pteris semipinnata (a non-As hyperaccumulator) in hydroponics and on As-contaminated soils. The results showed that both metallicolous and nonmetallicolous population of P. vittata possessed high-level As tolerance, and that the former exhibited higher As tolerance (but not Pb and Zn tolerance) than the latter. In hydroponic culture, nonmetallicolous population clearly showed significantly higher As concentrations in fronds than those in metallicolous populations. In pot trials, As concentrations in fronds of nonmetallicolous population ranged from 1060 to 1639 mg kg^?1, about 2.6- to 5.4-folds as those in metallicolous populations. It was concluded that As tolerance in P. vittata resulted from both constitutive and adaptive traits, Pb and Zn tolerances were constitutive properties, and that nonmetallicolous population possesses more effective As hyperaccumulation than metallicolous populations.     

Life-cycle assessment of flash pyrolysis of wood waste

This work analyzes a process known as flash pyrolysis, which produces bio fuels using biomass for power generation. A life-cycle assessment of flash pyrolysis of wood waste was conducted to study whether a flash pyrolysis plant set up locally would be environmentally friendly. The results obtained show that the process of flash pyrolysis of wood waste is in fact environmentally friendly, and the process has little contribution to the environment. However, efforts still have to be made to address the global warming potential issue. Continuous research and developments must be carried out to further reduce the global warming potential of the flash pyrolysis.