Fluoride is highly present in the environment, especially in water and its derivatives. Excessive fluoride contribution to diet poses a health risk. Tea leaves accumulate fluoride and the consumption of tea (Camellia sinensis) could pose a risk to human by the excessive fluoride intake. Ninety tea samples were analyzed by potentiometry using a selective fluoride ion electrode. Mixed tea samples (2.82?±?1.11 mg/L) and black tea samples (2.28?±?0.79 mg/L) recorded the highest fluoride levels. The contribution of drinking water is important for increasing fluoride levels in teas. The daily consumption of two cups (250 mL per cup) of mixed and black teas prepared with La Laguna tap water does pose a health risk for children (4–8 years old) because of the high contribution percentages (74.4% and 63.6%, respectively) of the Tolerable Upper Intake Level set in 2.5 mg/day by the EFSA (European Food Safety Authority). A minor consumption in children (4–8 years old) and adults during pregnancy is advisable.
Environmental Science and Pollution Research - This study aims to assess interrelationships between serum lead (Pb), cadmium (Cd), arsenic (As), and mercury (Hg) concentrations in pregnant women in... 相似文献
ABSTRACTThe effects of the spread of residue concentrations in the samples derived from the selected supervised trials and the number of trials were studied on the magnitude and uncertainty of the short-term dietary intakes calculated with the proposed new procedure (IESTIp) and that one used currently by the FAO (Food and Agriculture Organization) and WHO (World Health Organization) Joint meeting on Pesticide Residues (JMPR) (IESTIc). The residue data of 10 pesticides were obtained from supervised trials conducted on apples and pears. The methods described in Part I were used for the calculations of the uncertainty. The results indicate that the ratio of IESTIP to IESTIc (φIESTI) is directly proportional to the ratio of the estimated maximum residue level (MRL), recommended by the JMPR; to the highest residue (HR) observed in supervised trials, and it may have a wide range depending on the particular conditions. The φIESTI becomes greater with the increase of the difference between the mrl or maximum residue limit (MRL, established by the Codex Alimentarius Commission, CAC) and HR, and becomes smaller if the difference between the large portion (LP) and unit mass (U) decreases. The φIESTI ranged between 2 and 5.1 in the 16 cases examined indicating that the IESTIp calculation method leads to higher intake estimates. The ratio of CVIESTIp and CVIESTIc ranged typically between 0.62 and 1.71. It rapidly increased up to 12 trials. For a larger number of trials, the ratio remained practically constant (1.69–1.71). The processing factor (PF) equally affects the MRL and HR values, therefore, it will not practically influence the φIESTI. The uncertainty of the estimated median residues depends on the spread and number of values in the residue datasets, which affects the uncertainty of the conversion factor (CF) and subsequently the uncertainty of the estimated IESTIp. Residue values obtained from minimum nine independent trials are required for the correct calculation of the 95% confidence intervals of the calculated median residues. The uncertainty of the analytical results directly affects the median, HR values and indirectly the calculated mrl and the MRL derived from it. Therefore, it should also be considered for the calculation of the combined uncertainty of the conversion factors. For the correct interpretation of the results of dietary exposure calculations, the upper 95% confidence limit of the short-term intake should also be considered. However, it is not the current practice of regulatory agencies or JMPR. 相似文献
In the present study, TiO2-coated ultrafiltration membranes were prepared and used for oily water filtration (droplet size <?2 μm). The aim of this work was to investigate the effect of different salt contents on fouling and filtration properties of neat and TiO2-coated membranes during oil-in-water emulsion filtration. The effect of the TiO2 coating on the flux, surface free energy, and retention values was measured and compared with the neat membrane values. The cleanability of the fouled TiO2-coated membranes by UV irradiation was also investigated by measuring flux recovery and contact angles, and the chemical changes during cleaning were characterized by ATR-IR. It was found that increasing the salt content of the model wastewaters, oil-in-water emulsions, increased the zeta potential and the size of the droplets. The presence of the TiO2 coating decreases the membrane fouling during oily emulsion filtration compared to the neat membrane, due to the hydrophilicity of the coating regardless of the salt content of the emulsions. The neat and coated membrane oil retention was similar, 96?±?2%. The coated membrane can be effectively cleaned with UV irradiation without additional chemicals and a significant flux recovery can be achieved. Monitoring of the cleaning process by following the membrane surface wettability and ATR-IR measurements showed that the recovery of flux does not mean the total elimination of the oil layer from the membrane surface. 相似文献
Coastal lagoon ecosystems are vulnerable to eutrophication, which leads to the accumulation of nutrients from the surrounding watershed over the long term. However, there is a lack of information about methods that could accurate quantify this problem in rapidly developed countries. Therefore, various statistical methods such as cluster analysis (CA), principal component analysis (PCA), partial least square (PLS), principal component regression (PCR), and ordinary least squares regression (OLS) were used in this study to estimate total organic matter content in sediments (TOM) using other parameters such as temperature, dissolved oxygen (DO), pH, electrical conductivity (EC), nitrite (NO2), nitrate (NO3), biological oxygen demand (BOD), phosphate (PO4), total phosphorus (TP), salinity, and water depth along a 3-km transect in the Gomishan Lagoon (Iran). Results indicated that nutrient concentration and the dissolved oxygen gradient were the most significant parameters in the lagoon water quality heterogeneity. Additionally, anoxia at the bottom of the lagoon in sediments and re-suspension of the sediments were the main factors affecting internal nutrient loading. To validate the models, R2, RMSECV, and RPDCV were used. The PLS model was stronger than the other models. Also, classification analysis of the Gomishan Lagoon identified two hydrological zones: (i) a North Zone characterized by higher water exchange, higher dissolved oxygen and lower salinity and nutrients, and (ii) a Central and South Zone with high residence time, higher nutrient concentrations, lower dissolved oxygen, and higher salinity. A recommendation for the management of coastal lagoons, specifically the Gomishan Lagoon, to decrease or eliminate nutrient loadings is discussed and should be transferred to policy makers, the scientific community, and local inhabitants. 相似文献
A modified sequential mass-suspension polymerization was employed to ensure adequate dispersion of lignin into the monomeric phase. Due to its complex macromolecular structure and low compatibility with styrene, eucalyptus wood-extracted lignin, via a modified Kraft method, was esterified with methacrylic anhydride to ensure organic phase homogeneity into the reaction medium. Infrared spectroscopy showed a decrease in the hydroxyl band, a characteristic of natural lignin (3200–3400 cm?1) and an increase in the characteristic ester band (1720–1740 cm?1) whereas nuclear magnetic resonance measurements exhibited intense peaks in the range from 1.7 to 2.05 ppm (–CH3) and 5.4 to 6.2 ppm (=CH2), related to methacrylic anhydride. Comparatively, the esterified lignin also displayed an increase of its glass transition temperature for 98?°C, related to natural lignin, whose Tg was determined to be equal to 91?°C. Styrene/lignin-based polymers exhibited higher average molar masses in comparison to the values observed for polystyrene synthesized with similar amounts of benzoyl peroxide, due to the ability of lignin to act as a free-radical scavenger. Composites obtained with styrene and natural or esterified lignin were successfully synthesized, presenting regular morphology and proper lignin dispersion. Based on a very simple polymerization system, it is possible to enhance the final properties of polystyrene through the incorporation of lignin, which represents an important platform for developing attractive polymeric materials from renewable resources. 相似文献
Environmental Science and Pollution Research - Organotin compounds, such as tributyltin (TBT), are environment contaminants that induce bioaccumulation and have potential toxic effects on marine... 相似文献
In recent years there is a growing need in generating a biocompatible and cost effective porous scaffold for tissue engineering purposes. Therefore, this study focused on conversion of the shell waste of locally available crab variety P.pelagicus (Blue swimming crab) into the chitosan scaffold. As the poor mechanical strength of chitosan limits its usage in tissue engineering, it was blended with alginate. The scaffolds were prepared by the freeze gelation method which requires less time and minimum energy, with fewer residual solvent and easier to scale up. To the best of our knowledge there are no reports on scaffold preparation from the extracted chitosan, blended with alginate by freeze gelation method. The biological properties of chitosan-alginate scaffolds (Cts–Alg) were evaluated and compared with those of chitosan scaffolds. The prepared scaffolds were characterized by SEM, swelling property, in vitro enzymatic degradation, and hemo, biocompatibility properties. Chitosan-alginate scaffolds had an average pore size of 40 μm and tensile strength of 0.564 ± 0.0.018 % MPa. Its swelling ratio was 27.5 ± 0.28 %, with mass loss percentage of 10 ± 0.33 % after 4 weeks of degradation. It has exhibited good hemocompatible properties too. Mouse fibroblast 3T3 cells were able to adhere and proliferate well in the blended scaffold. All these results indicated that chitosan-alginate scaffold is a suitable alternative substitute for tissue engineering. 相似文献
Regional Environmental Change - Agriculture is one of the most vulnerable economic sectors to the impacts of climate change, specifically those related with expected changes in water availability.... 相似文献
Source apportionment study was performed, applying principal component analysis to the results of 221 chemical analyses of PM10 and PM2.5 samples collected daily from the industrial (but low traffic) Spanish town of Puertollano over a 14-month period during 2004-2005. Results reveal compositional variations attributable to different mixtures of natural and anthropogenic materials, mainly soil and rock dust (crustal), marine salt (only in PM10), petrochemical refinery emissions, and particles attributed to the combustion of local coal, which is unusually rich in Pb and Sb. During the study period there were 34 pollution episodes when PM10 exceeded 50 tg m(-3), mostly due to winter air temperature inversions, regional atmospheric stagnation, or African dust incursions (North African, NAF days: usually in summer). Whereas the crustal component during NAF episodes averaged 52% with a PM2.5/PM10 ratio of 0.54, this dropped to 29% and a PM2.5/PM10 of 0.67 during non-NAF days when anthropogenic materials predominated. Abnormally enhanced concentrations of pathfinder metallic trace elements provide additional evidence for source apportionment: thus aerosols with raised levels of Pb and Sb are associated with local coal combustion, Ni and V can be linked to petrochemical PM emissions, and Ti, Mn, Rb, and Ce are particularly characteristic of crustal dust incursions. 相似文献