Arsenic speciation of atmospheric particulate matter (PM10) in an industrialised urban site in southwestern Spain

An arsenic speciation study has been performed in PM10 samples collected on a fortnight basis in the city of Huelva (SW Spain) during 2001 and 2002. The arsenic species were extracted from the PM10 filters using a NH2OH x HCl solution and sonication, and determined by HPLC-HG-AFS. The mean bulk As concentration of the samples analyzed during 2001 and 2002 slightly exceed the mean annual 6 ng m(-3) target value proposed by the European Commission for 2013, arsenate [As(V)] being responsible for the high level of arsenic. The speciation analyses showed that As(V) was the main arsenic species found, followed by arsenite [As(III)] (mean 6.5 and 7.8 ng m(-3) for As(V), mean 1.2 and 2.1 ng m(-3) for As(III), in 2001 and 2002, respectively). The high levels of arsenic species found in PM10 in Huelva have a predominant industrial origin, such as the one from a nearby copper smelter, and do not present a seasonal pattern. The highest daily levels of arsenic species correspond to synoptic conditions in which the winds with S and SW components transport the contaminants from the main emission source. The frequent African dust outbreaks over Huelva may result in an increment of mass levels of PM10, but do not represent a significant input of arsenic in comparison to the anthropogenic source. The rural background levels of arsenic around Huelva are rather high, in comparison to other rural or urban areas in Spain, showing a relatively high atmosphere residence time of arsenic. This work shows the importance of arsenic speciation in studies of aerosol chemistry, due to the presence of arsenic species [As(III) and As(V)] with distinct toxicity.     

Evaluation of genotoxicity and toxicity of water and sediment samples from a Brazilian stream influenced by tannery industries

This paper reports results of genotoxicity and toxicity studies of water and sediment samples collected from the Estancia Velha stream of southern Brazil, a stream transporting both domestic sewage and effluents from regional factories working in the leather industry. Three sites were selected: in the stream headwaters (Site 1), located downstream of an urban area (Site 2), and near the basin outfall (Site 3). Results obtained with Allium cepa showed no evidence of chromosomal mutation, either in water or in sediment, during winter or summer seasons, but samples collected below Site 1 showed high toxicity. Physical and chemical analyses showed high concentrations of pollutants at these sites. Ecotoxicity tests with Daphnia magna and Ceriodaphnia dubia measured toxicity in water from Sites 2 and 3 in summer 2004. A toxic effect on Hyalella azteca was only found in sediment from Site 3 during winter 2003 and summer 2004. The results suggest that the synergy among different compounds in domestic and industrial sewage discharges can make it difficult to maintain system stability.     

Virological Characterization of Roof-Harvested Rainwater of Densely Urbanized Low-Income Region

Food and Environmental Virology - Roof-harvested rainwater (RHRW) is considered relatively clean water, even though the possible presence of pathogens in the water may pose human health risks. In...     

Rapid molecular prenatal diagnosis of ataxia-telangiectasia by direct mutational analysis

Mutations of the ataxia-telangiectasia-mutated (ATM) gene are responsible for the autosomal recessive disorder ataxia-telangiectasia (A-T). This study reports the first A-T prenatal diagnosis performed in Spain by direct molecular analysis. The pregnant woman had a previous child suffering from A-T due to a deletion in the ATM gene. The ATM coding region was sequenced in the A-T patient and her parents. Then, a specific polymerase chain reaction (PCR) to detect the deletion was performed for prenatal diagnosis. Additionally, polymorphic HLA loci were examined in order to exclude the possible contamination by maternal DNA. In this family of Gypsy origin, we carried out a rapid molecular diagnosis of A-T. Then, a prenatal diagnosis was carried out, identifying the deletion in the fetal DNA. Additionally, we performed a population study in unrelated Spanish Gypsies and in unrelated controls, showing that the deletion described could be a hotspot in the Spanish Gypsy population. The size of the coding region and the genomic structure, together with the absence of hotspots, make the mutation screening of the ATM gene difficult. The ability to identify ATM mutations provides a tool that can be applied in confirmatory diagnosis, genetic counselling, carrier prediction and prenatal diagnosis. Copyright © 2007 John Wiley & Sons, Ltd.     

In vitro reproduction of the turbellarian<Emphasis Type="Italic"> Urastoma cyprinae</Emphasis> isolated from<Emphasis Type="Italic"> Mytilus galloprovincialis</Emphasis>

Urastoma cyprinae is a species infecting the gills of several marine bivalves. Although there is some literature on this turbellarian, its life cycle remains unknown. In our work we have demonstrated that reproduction of U. cyprinae can be completed out of its host. More than 50% of turbellarians isolated from mussels (Mytilus galloprovincialis) secreted and cemented a cocoon to the well bottom during the first 72 h of incubation in seawater (34 salinity) at 14°C. Oviposition started at days 1–18 (average 4.8 days) and occurred in most cases inside the protective cocoon. Each Urastoma laid an average of 2.9 egg capsules (range 1–10) and 3.9 embryos were developed inside each egg capsule (range 1–11). Hatching started at days 20–43 (average 24 days). An average of 12.8 juvenile forms (range 1–64) escaped from the cocoon after hatching. The free-swimming juveniles showed a positive phototactic response and survived about a month after hatching. On the basis of our results, we propose a life cycle for U. cyprinae involving a sexual maturation parasitic period in the bivalve gills and a reproduction period including cocoon secretion, egg laying, and hatching that is entirely completed in the external environment.Communicated by S.A. Poulet, Roscoff     

Assessment of aquatic plants in the reservoirs of AES-tietê and development of an integrated control model for the most important species

The general objective of this work was to develop a monitoring and management model for aquatic plants that could be used in reservoir cascades in Brazil, using the reservoirs of AES-Tietê as a study case. The investigations were carried out at the reservoirs of Barra-Bonita, Bariri, Ibitinga, Promiss?o, and Nova-Avanhandava, located in the Tietê River Basin; Agua Vermelha, located in the Grande River Basin; Caconde, Limoeiro, and Euclides da Cunha, which are part of the Pardo River Basin; and the Mogi-Gua?u reservoir, which belongs to the Mogi-Gua?u River basin. The main products of this work were: development of techniques using satellite-generated images for monitoring and planning aquatic plant control; planning and construction of a boat to move coating plant masses and an airboat equipped with a DGPS navigation and application flow control system. Results allowed to conclude that the occurrence of all types of aquatic plants is directly associated with sedimentation process and, consequently, with nutrient and light availability. Reservoirs placed at the beginning of cascades are more subject to sedimentation and occurrence of marginal, floating and emerged plants, and are the priority when it comes to controlling these plants, since they provide a supply of weeds for the other reservoirs. Reservoirs placed downstream show smaller amounts of water-suspended solids, with greater transmission of light and occurrence of submerged plants.     

Strategies for management of Sicyos polyacanthus Cogn. (Cucurbitaceae) in sugarcane crops of Tucumán, Argentina

Sicyos polyacanthus is one of the most important weed in sugarcane crops of Tucumán (Argentina). The objective of this work was to establish strategies that would decrease the weed incidence in the crop to a minimum level. The study was carried out during 1998--2003 at five localities of sugarcane production of Tucumán (Argentina). The plots were 20 m long (192 m2) with 6 furrows and each plot was replicated five times. Treatments were: (i) Mechanical-chemical cultivation without fire; (ii) Mechanical-chemical culltivation with fire; (iii) Mechanical cultivation with handle pulled and with fire; (iv) Mechanical cultivation with handle pulled without fire; (v) Mechanical and chemical variants with fertilization and without fertilization; (vi) Mechanical and chemical variants with watering and without watering; (vii) Fallow and rotation, at the sugarcane crop renovation; (viii) Mechanical and chemical variants for plant cane and ratoon cane; and (ix) Mulching of harvest rests. The results suggest that besides the use of preemergent herbicides, fire marks the entry point of control, influencing fluxes and seed viability. It appears that fallow, mulching, and rotation of crops is fundamental for eliminating seeds that live short time in the soil and increase the mortality rate of species.     

Survey of deep-dwelling red coral (<Emphasis Type="Italic">Corallium rubrum</Emphasis>) populations at Cap de Creus (NW Mediterranean)

The distribution and population structure of the eurybathic gorgonian Corallium rubrum were studied off Cap de Creus (Costa Brava, Northwestern Mediterranean Sea). Red coral is endemic to the Mediterranean Sea and the adjacent NE Atlantic coast, where it has been over exploited for centuries. This study presents, the first quantitative data on the spatial distribution and structure of a population extending between 50 (common SCUBA limits) and 230 m depth, and compared it with shallow populations previously studied in the same area. Different remotely operated vehicles (ROV) and two methodological approaches were employed during four cruises between 2002 and 2006: 1-Extensive surveys: sea to coast transects in which red coral density and patch frequency were recorded; 2-Intensive surveys, in which parameters describing colony morphology were recorded. Most of the hard substrate between 50 and 85 m depth was inhabited by red coral colonies, showing a patch frequency of 8.3 ± 7.9 SD patches per 100 m-transect (total transect area: 34 m²), and within-patch colony densities of 16–376 colonies m⁻² (mean of 43 ± 53 colonies m⁻²). Below 120 m depth red coral was less abundant, and rather than forming dense patches as in shallow water, isolated colonies were more common. The population structure differed between sites that are easily accessible to red coral fishermen, and remote ones (both at similar depth, 60–80 m), as colonies in easily accessible locations were smaller in height and diameter, and showed a less developed branching pattern. At shallower locations (10–50 m depth) the population structure was significantly different from those at deeper locations, due to the heavy harvesting pressure they are exposed to in the shallows. Twenty-five to forty-six percentage of the deeper colonies were taller than 6 cm, while only 7–16% of the shallow water colonies exceeded 6 cm colony height. Forty-six to seventy-nine percentage of the colonies in deeper waters were large enough to be legally harvested, while only 9–20% of the shallow water colonies met the 7 mm legal basal diameter to be collected. The branching pattern was also better developed in deeper colonies, as up to 16% of the colonies showed fourth order branches, compared to less than 1% of the shallow water colonies (of which 96% consisted of only one single branch). The results thus confirm that C. rubrum populations above 50 m depth are exposed to a higher harvesting intensity than deeper populations in the same area.