Spray charging of droplets in a wet scrubber

The experimental setup was designed to study the effect of natural charging of droplets during spraying (called spray electrification or spray charging) in a wet scrubber. The influence of nozzle material, liquid feed rate, and liquid composition on the specific charge (charge per unit volume of liquid) formed in spraying was measured. It was found that the nozzle material has no measurable effect on this specific charge. Increasing the liquid feed rate increases the specific charge significantly. Increasing solute (NaCl or NaOH) concentration increases the conductivity that decreases the formed specific charge. The same correlation between the specific charge and conductivity was also observed with real scrubbing liquids. It is proposed that the specific charge depends only on the value of liquid conductivity, not on liquid composition. The conductivity of the tested scrubbing liquids was high enough to suppress the formation of a high specific charge during spraying.     

Persistent Norovirus Contamination of Groundwater Supplies in Two Waterborne Outbreaks

Microbiological contamination of groundwater supplies causes waterborne outbreaks worldwide. In this study, two waterborne outbreaks related to microbiological contamination of groundwater supplies are described. Analyses of pathogenic human enteric viruses (noroviruses and adenoviruses), fecal bacteria (Campylobacter spp. and Salmonella spp.), and indicator microbes (E. coli, coliform bacteria, intestinal enterococci, Clostridium perfringens, heterotrophic plate count, somatic and F-specific coliphages) were conducted in order to reveal the cause of the outbreaks and to examine the effectiveness of the implemented management measures. Moreover, the long-term persistence of noro- and adenovirus genomes was investigated. Noroviruses were detected in water samples from both outbreaks after the intrusion of wastewater into the drinking water sources. In the outbreak I, the removal efficiency of norovirus genome (3.0 log₁₀ removal) in the sand filter of onsite wastewater treatment system (OWTS) and during the transport through the soil into the groundwater well was lower than the removal efficiencies of E. coli, coliform bacteria, intestinal enterococci, and spores of C. perfringens (6.2, 6.0, > 5.9, and > 4.8 log₁₀ removals, respectively). In the outbreak II, cleaning of massively contaminated groundwater well and drinking water distribution network proved challenging, and noro- and adenovirus genomes were detected up to 3 months (108 days). The long-term persistence study showed that noro- and adenovirus genomes can remain detectable in the contaminated water samples up to 1277 and 1343 days, respectively. This study highlights the transport and survival properties of enteric viruses in the environment explaining their potency to cause waterborne outbreaks.     

Roadside aerosol study using hygroscopic,organic and volatility TDMAs: Characterization and mixing state

Traffic-related aerosol particles are ubiquitous in the urban atmosphere. As they are produced at ground level, they can also cause adverse health effects to urban dwellers. However, knowledge of the formation, transformation and chemically resolved size distribution of urban ultrafine particles is incomplete. Thus, more of these measurements are needed for better assessment of ambient air quality and its potential health effects. The particle number concentration, aerosol black carbon (BC) concentration and size distribution of traffic-related aerosols were measured near two major roads in Kuopio, Finland, from 16 June to 5 July, 2004. Furthermore, the properties of roadside aerosol particles were examined with the Tandem Differential Mobility Analyzer technique (TDMA). A suite of TDMA instruments relying on water (hygroscopic TDMA) and ethanol (organic TDMA) condensation as well as heating (volatility TDMA) were deployed to study the composition of the nucleation and Aitken mode particles (D_p = 10–50 nm) formed from vehicle exhaust. The results show that a simple three-component model was able to reproduce characteristic insoluble, organic and water-soluble volume fractions. Insoluble constituents were dominant in the Aitken mode particles, whereas organic compounds dominated the nucleation mode sizes. On average, only a small volume fraction was water-soluble, but a clear external mixing was observed particularly when enough time was allowed after the tail pipe emissions. The contribution of the insoluble material was seen to increase as a function of particle size, being typically less than 10% at 10 nm and between 20 and 50% at 50 nm, in contrast to the organic fraction, which decreased from about 80% at nucleation mode size range to 50–60% at 50 nm.     

Flow photocatalysis system-based functionalized graphene oxide-ZnO nanoflowers for degradation of a natural humic acid

Environmental Science and Pollution Research - The functionalized graphene oxide-ZnO (fGO/ZnO) nanoflower composites have been studied as a photocatalyst material for flow photodegradation of humic...     

Combining Conservation Value,Vulnerability, and Effectiveness of Mitigation Actions in Spatial Conservation Decisions: An Application to Coastal Oil Spill Combating

Increasing oil transportation and severe oil accidents in the past have led to the development of various sensitivity maps in different countries all over the world. Often, however, the areas presented on the maps are far too large to be safeguarded with the available oil combating equipment and prioritization is required to decide which areas must be safeguarded. While oil booms can be applied to safeguard populations from a drifting oil slick, decision making on the spatial allocation of oil combating capacity is extremely difficult due to the lack of time, resources and knowledge. Since the operational decision makers usually are not ecologists, a useful decision support tool including ecological knowledge must be readily comprehensible and easy to use. We present an index-based method that can be used to make decisions concerning which populations of natural organisms should primarily be safeguarded from a floating oil slick with oil booms. The indices take into account the relative exposure, mortality and recovery potential of populations, the conservation value of species and populations, and the effectiveness of oil booms to safeguard different species. The method has been implemented in a mapping software that can be used in the Gulf of Finland (Baltic Sea) for operational oil combating. It could also be utilized in other similar conservation decisions where species with varying vulnerability, conservational value, and benefits received from the management actions need to be prioritized.     

The Spatial and Temporal Variation of Measured Urban PM10 and PM2.5 in the Helsinki Metropolitan Area

We have studied particulate matter (PM) concentrations,PM₁₀ and PM_2.5, measured in an urban air qualitymonitoring network in the Helsinki Metropolitan Area during1997–1999. The data includes PM₁₀ concentrationsmeasured at five locations (two urban traffic, one suburbantraffic, one urban background and one regional backgroundsite) and PM_2.5 concentrations measured at twolocations (urban traffic and urban background sites). Theconcentrations of PM₁₀ show a clear diurnal variation,as well as a spatial variation within the area. Bycontrast, both the spatial and temporal variation of thePM_2.5 concentrations was moderate. We have analysedthe evolution of urban PM concentrations in terms of therelevant meteorological parameters in the course of oneselected peak pollution episode during 21–31 March, 1998.The meteorological variables considered included wind speedand direction, ambient temperature, precipitation, relativehumidity, atmospheric pressure at the ground level,atmospheric stability and mixing height. The elevated PMconcentrations during the 1998 March episode were clearlyrelated to conditions of high atmospheric pressure,relatively low ambient temperatures and low wind speeds inpredominantly stable atmospheric conditions. The resultsprovide indirect evidence indicating that the PM₁₀concentrations originate mainly from local vehiculartraffic (direct emissions and resuspension), while thePM_2.5 concentrations are mostly of regionally andlong-range transported origin.     

Investigating the Surface Energy Balance in Urban Areas – Recent Advances and Future Needs

Recent advances in understanding of the surface energy balance of urban areas, based on both experimental investigations andnumerical models, are reviewed. Particular attention is directedto the outcome of a COST-715 Expert Meeting held in April 2000,as well as experiments initiated by that action. In addition, recentcomplete parameterisations of urban effects in meso-scalemodels are reviewed. Given that neither the surface energybalance, nor its components, normally are directly measuredat meteorological stations, nor are there guidelines for theset-up of representative meteorological stations in urbanareas, this paper also provides recommendations to closethese gaps.     

Industrial symbiosis and the policy instruments of sustainable consumption and production

Industrial symbioses (ISs) and eco-industrial parks (EIPs) are key concepts of industrial ecology (IE). The aim of ISs and EIPs is to minimise inefficient material and energy use by utilising local by-product and energy flows. Industrial symbioses tend to develop through spontaneous action of economic actors, for gaining of economic benefit, but these systems can be designed and promoted via policy instruments as well. A literature review showed that national programmes for eco-industrial parks can be found in different parts of the world. In the action programmes and other sustainable consumption and production (SCP) policy documents of the EU, on the other hand, industrial symbioses gain less recognition as a path to enhanced sustainable production. In this article, we consider this and also analyse how the evolution and environmental performance of an industrial symbiosis system centred on a Finnish pulp and paper mill have been affected by SCP policy instruments. With regard to the system forming the subject of the case study, and Finnish industrial systems in general, policy instruments have succeeded in reducing emissions but not in systematically encouraging operators toward symbiosis-like activities. All in all, few studies exist on the overall impact of policy instruments promoting design of eco-industrial parks. It is not self-evident that symbiosis-like production systems would be sustainable in every case, as the background assumptions for political promotion of EIPs suggest. We concluded that industrial symbioses should be analysed and developed on a life cycle basis, with documentation of the real environmental benefits due to efficient resource use and decreased emissions in comparison to standalone production. ISs can then bring eco-competitiveness to companies in relation to SCP tools, such as environmental permits, ecolabels, and future product regulation based on the Ecodesign Directive in Europe. Indirect encouragement of symbiosis through land-use regulation and planning, in such a way that material fluxes between companies are possible both in operations and in financial terms, may prove effective. The same holds for waste policies that encourage increased reuse of a company’s waste by other enterprises.     

Evaluation of the European population intake fractions for European and Finnish anthropogenic primary fine particulate matter emissions

The intake fraction (iF) has been defined as the integrated incremental intake of a pollutant released from a source category or region summed over all exposed individuals. In this study we evaluated the iFs in the population of Europe for emissions of anthropogenic primary fine particulate matter (PM_2.5) from sources in Europe, with a more detailed analysis of the iF from Finnish sources. Parameters for calculating the iFs include the emission strengths, the predicted atmospheric concentrations, European population data, and the average breathing rate per person. Emissions for the whole of Europe and Finland were based on the inventories of the European Monitoring and Evaluation Programme (EMEP) and the Finnish Regional Emission Scenario (FRES) model, respectively. The atmospheric dispersion of primary PM_2.5 was computed using the regional-scale dispersion model SILAM. The iFs from Finnish sources were also computed separately for six emission source categories. The iFs corresponding to the primary PM_2.5 emissions from the European countries for the whole population of Europe were generally highest for the densely populated Western European countries, second highest for the Eastern and Southern European countries, and lowest for the Northern European and Baltic countries. For the entire European population, the iF values varied from the lowest value of 0.31 per million for emissions from Cyprus, to the highest value of 4.42 per million for emissions from Belgium. These results depend on the regional distribution of the population and the prevailing long-term meteorological conditions. Regarding Finnish primary PM_2.5 emissions, the iF was highest for traffic emissions (0.68 per million) and lowest for major power plant emissions (0.50 per million). The results provide new information that can be used to find the most cost-efficient emission abatement strategies and policies.     

Dependence on forest resources and tropical deforestation in Ghana

In Ghana, forests provide many products on which the local population subsists. However, these resources are depleting due to a variety of factors including agricultural expansion and over-exploitation of forest resources. This paper presents an analysis of the level of local dependence on forest resources and its implications for forest management in Ghana. The paper also outlines the causes of continuing deforestation in the studied region from the perspective of the local residents and discusses what role they could play in addressing the problem. The aim is to share more light on the current causes of deforestation and make suggestions for improved community-based forest management practices that could help to reduce deforestation. Primary data was collected through personal interviews and focus group discussions with 431 household heads randomly selected from three Forest Districts in Ghana. The survey showed that income from agriculture constituted 60% of the average total rural household income. Forest income provided 38% of total household income, and off-farm income 2%. The four most highly ranked causes of deforestation are poverty-driven agriculture, lack of alternative rural wage employment other than farming, household population levels, and conflict in traditional land practices. This shows a shift in the view of local people who in the past were quick to blame logging companies and government policies for deforestation. The majority of the respondents depended on wild animals like snail, bush meat, wild honey and wild and cultivated vegetables. Given the reasons for deforestation, much thought needs to go into agroforestry practices (e.g. snail farming, bee keeping, fish farming, and vegetable production) in efforts to reduce deforestation, which are currently less promoted. Readers should send their comments on this paper to: BhaskarNath@aol.com within 3 months of publication of this issue.