Performance comparison of solar still with inbuilt condenser and agitator over conventional solar still with energy and exergy analysis

Environmental Science and Pollution Research - Demand for fresh water increases day by day. Solar desalination is one of the promising technologies to meet this demand in an economical fashion...     

Effect of latex material on antioxidant enzymes,lipid peroxidation,DNA damage,and chromosomal aberration

Cell integrity is affected by oxidative stress when the production of active oxidants overwhelms antioxidant defense mechanisms. Latex, a natural polymer obtained from Hevea brasiliensis, is used in medical industry for manufacturing surgical gloves, urinary catheters, and dental dams. The aim of this study was to evaluate the effects of latex material on oxidative stress by in vivo and in vitro methods. In addition, the material was screened for its ability to induce any chromosomal aberrations (CAs) by in vitro method. In vivo studies were carried out with implanted latex material onto subcutaneous tissue of various batches of experimental Wistar rats. At the end of experimental period, animals were anesthetized, blood was collected for serum analysis, and sacrificed. Liver was excised for the determination of antioxidant enzymes and lipid peroxidation (LPO). Subcutaneous tissues were obtained for the extraction of genomic DNA from implanted animals and checked for the presence of 8-hydroxy-2-deoxyguanosine (8-OHdG), considered an indicator of DNA damage. Simultaneously, in vitro studies were carried out using fresh liver and subcutaneous tissue obtained from Swiss albino mice treated with physiological saline extract of latex material. For the estimation of both in vitro and in vivo oxidative stress, 10% liver homogenate was assessed for stress indicators like reduced glutathione, glutathione reductase, glutathione peroxidase, LPO and protein content. The results of both in vivo and in vitro studies indicated that the chemical leachents from the latex material did not significantly affect LPO and the levels of antioxidant enzymes. There was also no significant increase in 8-OHdG content due to the presence of implanted latex material. Finally, the results of in vitro CA test and G banding indicated that extracts of test material did not induce any chromosomal abnormalities.     

ENVIRONMENTAL AUDITING: Economic Values of Recreational Power Boating Resources in Pennsylvania

/ The travel cost method was used to estimate the economic value of seven major power boating resources in Pennsylvania. A significant relationship between number of visitor trips and cost per visitor trip existed for five of the seven water bodies. The annual total value for those five resources was $396 million, which was 2.5 times greater than the total out-of-pocket expenditures of approximately $157 million visitors spent to visit them. Research results can help resource managers plan and craft programs and policies that are founded on economic values of the natural resources involved.     

ECONOMIC INCENTIVES FOR AGRICULTURAL NONPOINT SOURCE POLLUTION CONTROL1

ABSTRACT. The limited success of command-and-control policies for reducing nonpoint source (NPS) water pollution mandated under the Federal Water Pollution Control Act (FWPCA) has prompted increased interest in economic incentive policies as an alternative control mechanism. A variety of measures have been proposed ranging from fairly minor modifications of existing policies to substantial revisions including watershed-wide polices that rely on economic incentives. While greater use of economic incentive policies, such as environmental bonds and point/nonpoint source trading is being advocated in the reauthorization of the CWA, the expected effects of individual proposals will be modest. The characteristics of NPS pollution, namely uncertainty and asymmetrical information, underscores that there is no single, ideal policy instrument for controlling the many types of agricultural NPS water pollution. Some of the usual incentive-based policies, such as effluent taxes, are not well suited to the task. Individual incentive policies proposed for the reauthorized CWA, such as pollution trading or deposit/refund systems, are not broadly applicable for heterogeneous pollution situations. Economic incentive policies may be appropriate in some cases, and command-and-control policies will be preferable in others and may in fact complement incentive policies.     

SEM-EDX analysis of various sizes aerosols in Delhi India

Scanning electron microscopy-energy dispersive X-ray analysis (SEM-EDX) was used to understand the differences in morphology, elemental composition and particle density of aerosols in different five size ranges to further investigate the potential sources as well as transport of pollutants from/at a much polluted and a very clean area of Delhi. Aerosol samples were obtained in five different size ranges viz. > or = 10.9, 10.9-5.4, 5.4-1.6, 1.6-0.7 and < or = 0.7 microm from a considerably very clean and a much polluted area of Delhi. It was observed that at polluted area most of the particles irrespective of size are of anthropogenic origin. At clean area, in coarse size fractions particles are of natural origin while in fine size range the presence of anthropogenic particles suggests the transport of particles from one area to the other.     

Characterization of Super Paramagnetic Nanoparticles Coated with a Biocompatible Polymer Produced by Dextransucrase from <Emphasis Type="Italic">Weissella cibaria</Emphasis> JAG8

Magnetic nanoparticles (MNPs) synthesised by chemical co-precipitation method was subjected to dextran coating by sonication method. The dextran was enzymatically synthesised by extracellular dextransucrase isolated from Weissella cibaria JAG8. The crystalline nature of MNPs and dextran coated MNPs were confirmed by X-ray diffraction studies with average particle size of 25 nm, which was confirmed further by high resolution transmission electron microscopy. The surface morphology of MNPs and dextran coated MNPs were monitored by scanning electron microscopy studies. The vibrating sample magnetometer investigation displayed the super paramagnetic nature of MNPs and dextran coated MNPs. FT-IR analysis of MNPs and dextran coated MNPs, displayed characteristic band of Fe–O bond at 582 cm^?1. Thermo-gravimetric analysis of MNPs and dextran coated MNPs (1:1) ratio displayed a weight loss of 15 and 18 %, which clearly indicated 3.0 % of dextran was coated on to the MNPs. The elemental composition study by scanning electron microscopy confirmed the association of dextran with MNPs. The in vitro effect of MNPs and dextran coated MNPs was performed on human colon cancer (HT-29) cell lines and the results showed that dextran coated: MNPs (2:1) displayed good biocompatibility results over dextran coated: MNPs (1:1) and un-coated MNPs.     

Estimation of environmental flow incorporating water quality and hypothetical climate change scenarios

Environmental flows (Eflow, hereafter) are the flows to be maintained in the river for its healthy functioning and the sustenance and protection of aquatic ecosystems. Estimation of Eflow in any river stretch demands consideration of various factors such as flow regime, ecosystem, and health of river. However, most of the Eflow estimation studies have neglected the water quality factor. This study urges the need to consider water quality criterion in the estimation of Eflow and proposes a framework for estimating Eflow incorporating water quality variations under present and hypothetical future scenarios of climate change and pollution load. The proposed framework is applied on the polluted stretch of Yamuna River passing through Delhi, India. Required Eflow at various locations along the stretch are determined by considering possible variations in future water quantity and quality. Eflow values satisfying minimum quality requirements for different river water usage classes (classes A, B, C, and D as specified by the Central Pollution Control Board, India) are found to be between 700 and 800 m³/s. The estimated Eflow values may aid policymakers to derive upstream storage-release policies or effluent restrictions. Generalized nature of this framework will help its implementation on any river systems.     

Carbon nanotube- and graphene-based advanced membrane materials for desalination

The development of membrane-based desalination and water purification technologies offers new alternatives to meet the global freshwater demand. Rapid advancement in carbon nanotube-based and graphene-based nanomaterials has drawn the attention of scientific investigators on various desalination technologies. These nanomaterials indeed offer advantageous structure, size, shape, porosity and mass transport behavior for membrane separation process. This article  reviews theoretical and experimental investigations of carbon nanotube- and graphene-based composite materials for desalination. Special attention is given to the simulation of molecular transport through these materials. Further, recent advances in the application of functionalization of carbon nanotube- and graphene-based materials for salt rejection and hydraulic permeation properties are discussed.     

Antibiofouling hollow-fiber membranes for dye rejection by embedding chitosan and silver-loaded chitosan nanoparticles

Environmental Chemistry Letters - The removal of toxic dyes from the wastewater and industrial effluents is a major environmental challenge. Various techniques have been employed for the removal of...     

Study of specific energy and friction coefficient in minimum quantity lubrication grinding using oil-based nanolubricants

An investigation on minimum quantity lubrication (MQL) grinding was carried out with the scope of documenting the process efficiency of oil-based nanolubricants. The nanolubricants were composed of MoS₂ nanoparticles (<100 nm) over coated with organic agents, dispersed in two different base oils—mineral oil (paraffin) and vegetable oil (soybean). Surface grinding tests were carried out on cast iron and EN 24 steel under different lubrication conditions—MQL using nanolubricants (varying compositional chemistry and concentration of nanoparticles), pure base oils (without nanoparticles) and base oils containing MoS₂ microparticles (3–5 μm), and flood grinding using water-based coolant. Specific energy, friction coefficient in grinding and G-ratio were used as measurands for determining the process efficiency. Results show that MQL grinding with nanolubricants increases the process efficiency by reducing energy consumption, frictional losses at the wheel–workpiece interface and tool wear. The process efficiency is also found to increase with increasing nanoparticle concentration. Soybean and paraffin based-nanolubricant performed best for steel and cast iron, respectively, showing a possible functional relationship between the compositional chemistry of nanolubricant and the workpiece material, which will be the goal of future work.