Source apportionment of emissions from light-duty gasoline vehicles and other sources in the United States for ozone and particulate matter

Federal Tier 3 motor vehicle emission and fuel sulfur standards have been promulgated in the United States to help attain air quality standards for ozone and PM_2.5 (particulate matter with an aerodynamic diameter <2.5 μm). The authors modeled a standard similar to Tier 3 (a hypothetical nationwide implementation of the California Low Emission Vehicle [LEV] III standards) and prior Tier 2 standards for on-road gasoline-fueled light-duty vehicles (gLDVs) to assess incremental air quality benefits in the United States (U.S.) and the relative contributions of gLDVs and other major source categories to ozone and PM_2.5 in 2030. Strengthening Tier 2 to a Tier 3-like (LEV III) standard reduces the summertime monthly mean of daily maximum 8-hr average (MDA8) ozone in the eastern U.S. by up to 1.5 ppb (or 2%) and the maximum MDA8 ozone by up to 3.4 ppb (or 3%). Reducing gasoline sulfur content from 30 to 10 ppm is responsible for up to 0.3 ppb of the improvement in the monthly mean ozone and up to 0.8 ppb of the improvement in maximum ozone. Across four major urban areas—Atlanta, Detroit, Philadelphia, and St. Louis—gLDV contributions range from 5% to 9% and 3% to 6% of the summertime mean MDA8 ozone under Tier 2 and Tier 3, respectively, and from 7% to 11% and 3% to 7% of the maximum MDA8 ozone under Tier 2 and Tier 3, respectively. Monthly mean 24-hr PM_2.5 decreases by up to 0.5 μg/m³ (or 3%) in the eastern U.S. from Tier 2 to Tier 3, with about 0.1 μg/m³ of the reduction due to the lower gasoline sulfur content. At the four urban areas under the Tier 3 program, gLDV emissions contribute 3.4–5.0% and 1.7–2.4% of the winter and summer mean 24-hr PM_2.5, respectively, and 3.8–4.6% and 1.5–2.0% of the mean 24-hr PM_2.5 on days with elevated PM_2.5 in winter and summer, respectively.

Implications: Following U.S. Tier 3 emissions and fuel sulfur standards for gasoline-fueled passenger cars and light trucks, these vehicles are expected to contribute less than 6% of the summertime mean daily maximum 8-hr ozone and less than 7% and 4% of the winter and summer mean 24-hr PM_2.5 in the eastern U.S. in 2030. On days with elevated ozone or PM_2.5 at four major urban areas, these vehicles contribute less than 7% of ozone and less than 5% of PM_2.5, with sources outside North America and U.S. area source emissions constituting some of the main contributors to ozone and PM_2.5, respectively.     

Optimal production scale of open pit mining operations with uncertain metal supply and long-term stockpiles

An open pit mining operation consists of various stages, and the calculation of the production capacities of these stages depends upon the available supply of ore (mineralized material of economic value) and waste material. Cutoff grade is the criterion that specifies the amount of ore and waste. The material with grade equal to or higher than the cutoff grade is classified as ore. The material with grade less than the cutoff grade is considered waste. While this explains the link between cutoff grade theory and the calculation of production capacities, the majority of optimization models for finding production capacities not only disregards this relationship but also ignores expected variations and uncertainty in metal content or the available supply of ore and waste material.     

Population and Environment： Necessary Transition Initiatives for Developing Countries

Now environment is an important topic in academic field. Many researches focus on the negative outcomes of nature which are being continually created by human and much attention has been paid to how the environment is protected through integrated research, movement and policy. But few studies are concentrated on population and environment and are to find out the interconnectivity and underlying mechanism that have an effect on people＇s preferring additional children and perception to environment. Many researchers claim that population growth is a great problem for environment but they do not provide the indepth integrated knowledge and mechanism that influence fertility trend and environmental problems. It is very crucial to develop practical and concrete initiatives to confirm a transition to reduce population growth and redirect the perception on population and environment.     

Distribution of lead in relation to size of airborne particulate matter in Islamabad, Pakistan

Airborne particulate matter (PM) collected from two sampling stations in Islamabad, Pakistan, was analyzed for lead content and size gradation. A high volume air sampler was used to trap particulates on glass fiber filters for 8-12 h on a daily basis. Lead was estimated using a nitric acid digestion based AAS method on 44 samples from station 1 and 61 samples from station 2. Particle size fractions were categorized as <2.5, 2.5-10, 10-100 and >100 microm. The correlation between lead concentration and particle size was investigated. The results from two stations indicated average airborne lead concentrations of 0.505 and 0.185 microg/m3. Enhanced levels of lead were measured at a maximum of 4.075 microg/m3 at station 1 and 4.000 microg/m3 at station 2. PM < 2.5 and PM > 100 were found to constitute the local atmosphere in comparable proportions. A comparison of the lead levels is made with the existing permissible levels of this element laid down by different international agencies.     

Development of a new approach for microbial decontamination of water using modified Fenton's reaction

Microbial decontamination of water was carried out using a novel radical generating system consisting of ion exchange resin, copper and hydrogen peroxide. The system was successful in reducing the microbial load in water by more than 99% in 15 min and is effective against all the microorganisms tested. The method was also successful in decontaminating the flood water obtained from Industrial Canal and 17th Street Canal in New Orleans. Decontamination is due to the formation of hydroxyl radicals, formed during the decomposition of hydrogen peroxide by the metal-polymer complex.     

Assessment of water quality of Manchar Lake in Sindh (Pakistan)

Manchar Lake is the largest natural freshwater lake in Pakistan. The Lake has received less fresh water in past few years. In addition, drainage water is being discharged in the Lake through Main Nara Valley Drain (MNVD) since many years. Consequently, concern has grown regarding the water quality of the Lake. The aim of this study was to assess the water quality of Manchar Lake and MNVD and the objectives were to determine physiochemical properties and the concentrations of common cations and anions as well as seven trace metals i.e. Cu, Ni, Zn, Co, Fe, Pb and Cd. The concentration of the trace metals were determined by simultaneous preconcentration and solvent extraction using flame atomic absorption spectrometer. Results of physicochemical parameters of Manchar Lake water samples showed mean pH 8.4 (±0.2), conductivity 2,310.3 (±581.3) μS cm⁻¹ and hardness (as CaCO₃) 213.1 (±62.3) mg l⁻¹. Mean concentrations of cations and anions were Na 521.5 (±49.7), Cl⁻ 413.6 (±225.7), Ca 70.7 (±12.9), Mg 56.2 (±28.9), K 17.6 (±6.5), 0.34 (±0.2) and 0.02 (±0.01) mg l⁻¹. Mean concentrations of trace metals were Zn 15.7 (±1), Fe 12 (±3.5), Pb 9 (±2.7), Cu 8.9 (±7.7), Ni 4.3 (±3.4), Co 4 (±3.4) and Cd 1.1 (±1) μg l⁻¹. MNVD water samples showed mean pH 8.9 (±0.8), conductivity 1,735.7 (±567.8) μS cm⁻¹ and hardness (as CaCO₃) 184.8 (±32.4) mg l⁻¹. In MNWD, the mean concentrations of cations and anions were Na 482.7 (±11.7), Cl⁻ 395.7 (±271.5), Ca 79.1 (±23.5), Mg 54.2 (±28.1), K 26.2 (±21.3), NO⁻³ 0.5 (±0.3) and 0.1 (±0.1) mg l⁻¹. Mean concentrations of trace metals observed in MNWD water were Fe 14.9(±3.5), Cd 8.3 (±9.4), Pb 6.9 (±2.4), Cu 6.6 (±3.1), Zn 6.2 (±1.8), Co 4.5 (±2.7), and Ni 3.5 (±2.9) μg l⁻¹. The pH of both Manchar Lake and MNVD waters and concentration of Pb in Manchar Lake and concentration of Cd in MNVD water were higher than the World Health Organisation’s guideline values for the drinking water quality. The water quality of Manchar Lake was found degraded.     

Assessment of background levels of trace metals in water and soil from a remote region of Himalaya

Selected trace metals were estimated by atomic absorption spectrometry in the water and soil samples collected from the remote region of Himalaya. The soil samples were analysed for soluble and acid extractable fraction of trace metals. In water samples, Ca, Na, Mg and K emerged as dominant contributors, whereas, Ca, Na, K, Mg, Fe and Pb were estimated at comparatively higher levels in the water extract of the soil. In case of acid extract of the soil samples, Ca, K, Fe, Mg, Mn and Na were found at elevated concentrations. Based on mean levels of the metals, following decreasing concentration order was observed in water samples: Ca > Na > Mg > K > Pb > Co > Cu > Zn > Mn > Cr > Fe > Cd > Li, however, in the acid extract of the soil, following order was noted: Ca > K > Fe > Mg > Mn > Na > Pb > Zn > Cr > Li > Cu > Co > Cd. The correlation study revealed appreciably diverse mutual relationships of trace metals in the water and soil samples. The multivariate cluster analyses exhibited divergent apportionment of trace metals in water and soil samples. Among the trace metals, Cd, Pb, Li, Zn, Cr, Cu, Mn and Co exhibited extreme to significant anthropogenic enrichment in the soil samples, while the rest of the metals were mostly contributed by the natural processes.     

Benzo(a)pyrene induced structural and functional modifications in lung cystatin

Cystatins are thiol proteinase inhibitors ubiquitously present in the mammalian body. They serve a protective function to regulate the activities of endogenous proteinases, which may cause uncontrolled proteolysis and damage. In the present study, the effect of benzo(a)pyrene [BaP] on lung cystatin was studied to explore the hazardous effects of environmental pollutant on structural and functional integrity of the protein. The basic binding interaction was studied by UV-absorption, FT-IR, and fluorescence spectroscopy. The enhancement of total protein fluorescence with a red shift of 5 nm suggests structural scratch of lung cystatin by benzo(a)pyrene. Further, ANS binding studies reaffirm the unfolding of the thiol protease inhibitor (GLC-I) after treating with benzo(a)pyrene. The results of FT-IR spectroscopy reflect perturbation of the secondary conformation (alpha-helix to β-sheet) in goat lung cystatin on interaction with BaP. Finally, functional inactivation of cystatin on association with BaP was checked by its papain inhibitory activity. Benzo(a)pyrene (10 μM) caused complete inactivation of goat lung cystatin. Benzo(a)pyrene-induced loss of structure and function in the thiol protease inhibitor could provide a caution for lung injury caused by the pollutants and smokers.     

Source Apportionment of Carbonaceous Aerosol in New York City by Multiple Linear Regression

A multiple linear regression model was applied to aerosol chemical data from New York City to determine the sources of carbonaceous aerosol. The model used elemental tracers for auto exhaust aerosol (Pb), residual oil combustion (V), resuspended dust (Mn or Fe), and incineration (Cu or Zn). Although relative uncertainties in the source apportionment were greater than 20%, auto exhaust was found to be the main source of organic carbon with lesser contributions from other sources. A substantial fraction of elemental carbon could not be associated with the sources used in the model and was possibly associated with the combustion of diesel and distillate oils. The regression coefficients, which are related to source composition, compared well with actual measured source compositions. Because of the uncertainties it was concluded that source apportionment, especially as it relates to the development of control strategies, should utilize the results of several receptor and source models where possible.