Spatial variations in selected metal contents and particle size distribution in an urban and rural atmosphere of Islamabad, Pakistan

Spatial variations in total suspended particulate matter (TSP) were investigated for distribution of metals and particle size fractions in the urban and rural atmosphere of Islamabad, Pakistan. The metals Na, K, Fe, Mn, Pb, Cd, Cr, Zn, Ni and Co, and the particle fractions <2.5, 2.5-10, 10-100 and >100 microm were included in the study. TSP samples were trapped on glass fibre filters using high volume samplers and quantification of metals was done using Atomic Absorption Spectrometry employing HNO(3) based wet digestion. At the urban site, Na was dominant at 2.384 microg/m(3) followed by K, Fe and Zn with 0.778, 0.667 and 0.567 microg/m(3) as mean concentrations, respectively. The metal levels for the rural site ranged from 0.002 microg/m(3) for Cd to 1.077 microg/m(3) for Na. However, compared with the urban site, mean Pb concentration showed an almost two-fold enhancement, i.e., 0.163 Vs. 0.327 microg/m(3). Metals and particle size source identification was done using Principal Component Analysis and Cluster Analysis. Five sources were traced out for the urban site: industrial, soil, automobile emissions, metallurgical industries and excavation activities. For the rural site, four sources were recorded: agricultural, automotive emissions, excavation activities and metallurgical units. Collectively, for both the sites, PM(10-100) emerged as a major contributor to TSP, followed by PM(2.5-10), PM(<2.5) and PM(>100) in that order. The metals showed in general positive relationship with fine particulate fractions (PM(2.5-10), PM(<2.5)), and negative correlation with coarse fractions (PM(10-100), PM(>100)). Comparison with the corresponding data from various Asian sites revealed that the levels of Na, K, Fe, Mn, Co and Ni for the present study were lower than those reported for grossly polluted cities of the world.     

Population and Environment： Necessary Transition Initiatives for Developing Countries

Now environment is an important topic in academic field. Many researches focus on the negative outcomes of nature which are being continually created by human and much attention has been paid to how the environment is protected through integrated research, movement and policy. But few studies are concentrated on population and environment and are to find out the interconnectivity and underlying mechanism that have an effect on people＇s preferring additional children and perception to environment. Many researchers claim that population growth is a great problem for environment but they do not provide the indepth integrated knowledge and mechanism that influence fertility trend and environmental problems. It is very crucial to develop practical and concrete initiatives to confirm a transition to reduce population growth and redirect the perception on population and environment.     

Distribution of lead in relation to size of airborne particulate matter in Islamabad, Pakistan

Airborne particulate matter (PM) collected from two sampling stations in Islamabad, Pakistan, was analyzed for lead content and size gradation. A high volume air sampler was used to trap particulates on glass fiber filters for 8-12 h on a daily basis. Lead was estimated using a nitric acid digestion based AAS method on 44 samples from station 1 and 61 samples from station 2. Particle size fractions were categorized as <2.5, 2.5-10, 10-100 and >100 microm. The correlation between lead concentration and particle size was investigated. The results from two stations indicated average airborne lead concentrations of 0.505 and 0.185 microg/m3. Enhanced levels of lead were measured at a maximum of 4.075 microg/m3 at station 1 and 4.000 microg/m3 at station 2. PM < 2.5 and PM > 100 were found to constitute the local atmosphere in comparable proportions. A comparison of the lead levels is made with the existing permissible levels of this element laid down by different international agencies.     

Comparison of carbonyl compounds emissions from diesel engine fueled with biodiesel and diesel

The characteristics of carbonyl compounds emissions were investigated on a direct injection, turbocharged diesel engine fueled with pure biodiesel derived from soybean oil. The gas-phase carbonyls were collected by 2,4-dinitrophenylhydrazine (DNPH)-coated silica cartridges from diluted exhaust and analyzed by HPLC with UV detector. A commercial standard mixture including 14 carbonyl compounds was used for quantitative analysis. The experimental results indicate that biodiesel-fueled engine almost has triple carbonyls emissions of diesel-fueled engine. The weighted carbonyls emission of 8-mode test cycle of biodiesel is 90.8 mg (kW h)^?1 and that of diesel is 30.7 mg (kW h)^?1. The formaldehyde is the most abundant compound of carbonyls for both biodiesel and diesel, taking part for 46.2% and 62.7% respectively. The next most significant compounds are acetaldehyde, acrolein and acetone for both fuels. The engine fueled with biodiesel emits a comparatively high content of propionaldehyde and methacrolein. Biodiesel, as an alternative fuel, has lower specific reactivity (SR) caused by carbonyls compared with diesel. When fueled with biodiesel, carbonyl compounds make more contribution to total hydrocarbon emission.     

Health risk assessment of drinking arsenic-containing groundwater in Hasilpur,Pakistan: effect of sampling area,depth, and source

Environmental Science and Pollution Research - Currently, several news channels and research publications have highlighted the dilemma of arsenic (As)-contaminated groundwater in Pakistan. However,...     

Using GIS tools to detect the land use/land cover changes during forty years in Lodhran District of Pakistan

Environmental Science and Pollution Research - Land use/land cover (LULC) change has serious implications for environment as LULC is directly related to land degradation over a period of time and...     

The effects of research and development and financial development on CO2 emissions: evidence from selected WAME economies

Environmental Science and Pollution Research - Earth is in the Anthropocene era and humankind deteriorates the global environment; thus, there is a dire need for sustainable policies at all levels....     

Heavy metal contamination and exposure risk assessment via drinking groundwater in Vehari,Pakistan

Environmental Science and Pollution Research - The presence of toxic substances in aquifers, particularly potentially toxic heavy metals, is an important environmental and social concern worldwide....     

Calcium invigorates the cadmium-stressed <Emphasis Type="Italic">Brassica napus</Emphasis> L. plants by strengthening their photosynthetic system

Introduction  

Cadmium (Cd) in plants interrupts numerous metabolic processes and reduces the water and nutrient uptake that cause chlorosis, growth retardation, and ultimately plant death. Response of Brassica napus L. to calcium (Ca) enrichment in growth medium for reducing Cd toxicity stress by strengthening the photosynthesis organelles and their functionality was explored in this study.     

Water/acid gas interfacial tensions and their impact on acid gas geological storage

Acid gas geological disposal is a promising process to reduce CO₂ atmospheric emissions and an environment-friendly and economic alternative to the transformation of H₂S into sulphur by the Claus process. Acid gas confinement in geological formations is to a large extent controlled by the capillary properties of the water/acid–gas/caprock system, because a significant fraction of the injected gas rises buoyantly and accumulates beneath the caprock. These properties include the water/acid gas interfacial tension (IFT), to which the so-called capillary entry pressure of the gas in the water-saturated caprock is proportional. In this paper we present the first ever systematic water/acid gas IFT measurements carried out by the pendant drop technique under geological storage conditions. We performed IFT measurements for water/H₂S systems over a large range of pressure (up to P = 15 MPa) and temperature (up to T = 120 °C). Water/H₂S IFT decreases with increasing P and levels off at around 9–10 mN/m at high T (≥70 °C) and P (>12 MPa). The latter values are around 30–40% of water/CO₂ IFTs, and around 20% of water/CH₄ IFTs at similar T and P conditions. The IFT between water and a CO₂ + H₂S mixture at T = 77 °C and P > 7.5 MPa is observed to be approximately equal to the molar average IFT of the water/CO₂ and water/H₂S binary mixtures. Thus, when the H₂S content in the stored acid gas increases the capillary entry pressure decreases, together with the maximum height of acid gas column and potential storage capacity of a given geological formation. Hence, considerable attention should be exercised when refilling with a H₂S-rich acid gas a depleted gas reservoir, or a depleted oil reservoir with a gas cap: in the case of hydrocarbon reservoirs that were initially (i.e., at the time of their discovery) close to capillary leakage, acid gas leakage through the caprock will inevitably occur if the refilling pressure approaches the initial reservoir pressure.