A lysimeter experimental study and numerical characterisation of the leaching of incinerator bottom ash waste

Incinerator bottom ash (IBA) is a residual produced from incinerating municipal solid waste. In the past, IBA presented a big waste disposal problem; however, various recycling approaches have been adopted in recent years to mitigate this problem, as well as to provide a useful alternative to using primary aggregate resources. The use of IBA as an alternative to conventional aggregates in different civil engineering construction applications helps to conserve premium grade aggregate supplies; however, when IBA is in contact with water in the field, as a consequence of precipitation events or changes in water table, elements, such as salts and heavy metals, may be released to the soil and ground water. In this work, IBA waste was mixed with limestone aggregate to produce a blend with acceptable mechanical properties and minimum environmental risks for use as road foundation. The study focused on evaluating potential environmental impacts of some constituents, including sulphate, chloride, sodium, copper, zinc and lead in IBA blends using a lysimeter as a large scale leaching tool. Moreover, a specific scenario simulating field conditions was adopted in the lysimeter to assess the potential impact of changing conditions, such as IBA content in the blend, liquid to solid ratio (L/S) and pH value, on long-term release of heavy metals and salts. Then, numerical modelling was used to predict the release of the aforementioned constituents from IBA based on initial measurement of intrinsic material properties and the kinetic desorption process concept. Experimental results showed that zinc and lead were released in very low concentrations but sodium and sulphate were in high concentrations. The control limestone only blend also demonstrated low release concentrations of constituents in comparison to IBA blends, where constituent concentrations increased with increase in IBA content. Experimental results were compared with numerical results obtained using a non-equilibrium desorption model. Good agreement was found between the two sets of data.     

The semiochemically mediated interactions between bacteria and insects

In natural environment, semiochemicals are involved in many interactions between the different trophic levels involving insects, plants and hosts for parasitoids or prey for predators. These volatile compounds act as messengers within or between insect species, inducing particular behaviours, such as the localisation of a source of food, the orientation to an adequate oviposition site, the selection of a suitable breeding site and the localisation of hosts or prey. In this sense, bacteria have been shown to play an important role in the production of volatile compounds which ones act as semiochemicals. This review, focusing on the semiochemically mediated interactions between bacteria and insects, highlights that bacterial semiochemicals act as important messengers for insects. Indeed, in most of the studies reported here, insects respond to specific volatiles emitted by specific bacteria hosted by the insect itself (gut, mouthparts, etc.) or present in the natural environment where the insect evolves. Particularly, bacteria from the families Enterobacteriaceae, Pseudomonaceae and Bacillaceae are involved in many interactions with insects. Because semiochemicals naturally produced by bacteria could be a very interesting option for pest management, advances in this field are discussed in the context of biological control against insect pests.     

Organochlorine pollutants in Scots pine needles--biological and site related variation within a forest stand

To study the biological variation in the content of some persistent organic pollutants, viz hexachlorobenzene (HCB), alpha- and gamma-hexachlorocyclohexane (alpha- and gamma-HCH), and 1,1,1-trichloro-2,2-bis-(4-chlorophenyl)-ethane (DDT) were analysed in needles from Scots pine trees growing at an isolated peninsula south of Stockholm, Sweden. The concentration variations of each compound was evaluated by a nested analysis of variance (ANOVA) with sampling site specific compass direction, individual tree, and sampling height as factors. Two pair-wise post hoc tests were used to test significant results from the ANOVA. The hexachlorocyclohexanes showed no significant differences between sampling site, trees or sampling height. DDT concentration was significantly lower at the sampling site with the densest vegetation compared to at least three of the other sampling sites. HCB was significantly lower at the lowest sampling height (0.5 m).     

The Distribution and Sources of Polycyclic Aromatic Hydrocarbons in Surface Sediments Along the Egyptian Mediterranean Coast

Coastal marine sediment samples were collected from 31 sampling stations along the Egyptian Mediterranean Sea coast. All sediment samples were analyzed to determine aliphatic and polycyclic aromatic hydrocarbons (PAHs) as well as total organic carbon (TOC) contents and grain size analysis. Total concentrations of 16 EPA-PAHs in the sediments were varied from 88 to 6338 ng g⁻¹ with an average value of 154 ng g⁻¹ (dry weight). However, the concentrations of total aliphatic were varied from 1.3 to 69.9 ng g⁻¹ with an average value of 15.6 ng g⁻¹ (dry weight). The highest contents of PAHs were found in the Eastern harbor (6338 ng g⁻¹), Manzala (5206 ng g⁻¹) and El-Jamil East (4895 ng g⁻¹) locations. Good correlations observed between a certain numbers of PAH concentrations allowed to identify its origin. The average total organic carbon (TOC) percent was varied from 0.91 to 4.54%. Higher concentration of total pyrolytic hydrocarbons (∑COMB) than total fossil hydrocarbons (∑PHE) declared that atmospheric fall-out is the significant source of PAHs to marine sediments of the Egyptian Mediterranean coast. The selected marked compounds, a principal component analysis (PCA) and special PAHs compound ratios (phenanthrene/anthracene vs fluoranthene/pyrene; ∑COMB/∑EPA-PAHs) suggest the pyrogenic origins, especially traffic exhausts, are the dominant sources of PAHs in most locations. Interferences of rather petrogenic and pyrolytic PAH contaminations were noticed in the harbors due to petroleum products deliveries and fuel combustion emissions from the ships staying alongside the quays.     

Evaluation of hydroxyapatite/poly(acrylamide-acrylic acid) for sorptive removal of strontium ions from aqueous solution

Environmental Science and Pollution Research - A composite polymer, hydroxyapatite/poly(acrylamide-acrylic acid), was synthesized by gamma-induced polymerization. The factors affecting the sorption...     

Smoldering combustion of dust layer on hot surface

The critical temperature as well as the critical flux for ignition of a dust layer of cornflour and a mixture of wheatflour and cornflour (80% wheatflour+20% cornflour) on a hot plate have been determined. The moulded sample was cylindrical in shape and of different heights and diameters. The particle size of dusts ranged between 63 μm to 150 μm. The temperature–time histories for self-heating without ignition and with ignition are offered, showing the critical boundaries between them. Also the times to ignition for each dust, showing the effect of sample size on their values, are determined. Certain experimental correlations which relate to times to ignition, as well as the critical temperature for ignition and thermal and geometrical dimensions of sample are presented.     

Effect of sewage on biodegradability of hydrocarbons in refinery wastewater

The effect of the microbial flora of municipal sewage, with special reference to faecal coliform and faecal streptococci groups, on the hydrocarbons biodegradation of the refinery wastewater from the Moustorod Oil Refinery has been studied. The results indicate that sewage with its microbial flora seems to have a significant role in the biodegradation of hydrocarbons in refinery wastewater. In addition, the early degradation in the wastewater seeded by sewage reveals that faecal streptococci, in addition to other microbial flora, have a significant role in the biodegradation of hydrocarbons.     

Delayed neurotoxicity in the wild mallard duckling caused by the organophosphorus insecticides cyanofenphos and leptophos

The susceptibility of wild mallard ducklings to the delayed neurotoxic effect of the neurotoxic organophosphorus insecticides cyanofenphos and leptophos was evaluated following a daily dosing regimen. Ducklings were treated daily with either cyanofenphos or with leptophos at different dose levels for 90 days, or until they died, or became paralyzed. A control group of ducklings given corn oil at 1 ml/kg daily for 90 days was used for comparison. All treated birds were observed daily for any clinical signs of neurotoxicity during the course of this study. All of the surviving ducklings that were treated with cyanofenphos at 4 mg/kg/day or leptophos at 10 mg/kg/day developed clinical signs of delayed neurotoxicity after 7 to 11 weeks of intoxication. Symptoms included leg weakness, ataxia, severe ataxia and paralysis. The observed clinical signs were confirmed by histological changes found in the spinal cords of the treated birds. These changes were of the type associated with organophosphorus-induced delayed neuropathy (OPIDN). These results demonstrate that wild mallard ducklings are susceptible to OPIDN and this avian species can be used in screening organophosphorus compounds for such effect.