PCB congener distributions in muscle,liver and gonad of Fundulus heteroclitus from the lower Hudson River Estuary and Newark Bay

Gradients in sediment polychlorinated biphenyl (PCB) concentrations and PCB congener profiles exist along the Hudson River (NY, USA). We evaluated site and tissue differences in PCB concentration and congener profiles in resident mummichog (Fundulus heteroclitus) collected from PCB-contaminated sites in the lower Hudson River and the New York/New Jersey Harbor Estuary. Fish were collected from three PCB-contaminated sites Piermont Marsh (P), Iona Marsh (I), and Newark Bay (NB), and from two reference sites (Flax Pond, NY; Succotash Salt Marsh, RI). Congener profiles were statistically analyzed using principal component analysis (PCA) and general linear model (GLM) profile analysis. Contaminated fish had PCB tissue concentrations approximately 10-fold higher than those of reference fish. There were no site differences in PCB body burden (all tissues combined) among the contaminated site fish. However, relative PCB concentration did differ between organs: NB fish (gonad=liver>muscle); I and P fish (gonad>liver>muscle). In contrast to PCB content, PCB congener profiles did show site differences; NB mummichog being depleted in the less chlorinated congeners relative to I and P fish, likely reflecting different PCB sources to these populations. Within a site, however, PCB congener patterns were similar between liver, gonad and muscle. In conclusion, PCA and GLM analyses gave complementary results, both analyses indicating differences in site, but not tissue, distributions of PCB congeners. This study also demonstrates that unlike congener profiles, total PCB content does differ dramatically amongst tissues and further, that PCB differences among tissues (gonad vs. liver vs. muscle) can vary with site.     

Sampling and analysis considerations for the determination of hexavalent chromium in workplace air

Airborne hexavalent chromium (Cr[VI]) is a known human respiratory carcinogen and allergen. Workers in a variety of industries may be exposed to airborne hexavalent chromium, with exposures frequently occurring via inhalation and/or dermal contact. Analytical methods for the measurement of Cr(VI) compounds in workplace samples, rather than for the determination of total elemental chromium in workplace air, are often desired because exposure limit values for Cr(VI) compounds are much lower than for total Cr. For years, sampling and analytical test methods for airborne Cr(VI) have been investigated so as to provide means for occupational exposure assessment to this highly toxic species. Inter-conversion of trivalent chromium (Cr[III]) and Cr(VI) can sometimes occur during sampling and sample preparation, and efforts to minimize unwanted redox reactions involving these chromium valences have been sought. Because of differences in toxicity, there is also interest in the ability to differentiate between water-soluble and insoluble forms of Cr(VI), and procedures that provide solubility information concerning Cr(VI) compounds have been developed. This paper reviews the state of the art concerning the measurement of airborne Cr(VI) compounds in workplace aerosols and related samples.     

Visibility impacts at Class I areas near the Bakken oil and gas development

Oil and gas activities have occurred in the Bakken region of North Dakota and nearby states and provinces since the 1950s but began increasing rapidly around 2008 due to new extraction methods. Three receptor-based techniques were used to examine the potential impacts of oil and gas extraction activities on airborne particulate concentrations in Class I areas in and around the Bakken. This work was based on long-term measurements from the Interagency Monitoring of Protected Visual Environments (IMPROVE) monitoring network. Spatial and temporal patterns in measured concentrations were examined before and after 2008 to better characterize the influence of these activities. A multisite back-trajectory analysis and a receptor-based source apportionment model were used to estimate impacts. Findings suggest that recent Bakken oil and gas activities have led to an increase in regional fine (PM_2.5—particles with aerodynamic diameters <2.5 µm) soil and elemental carbon (EC) concentrations, as well as coarse mass (CM = PM₁₀–PM_2.5). Influences on sulfate and nitrate concentrations were harder to discern due to the concurrent decline in regional emissions of precursors to these species from coal-fired electric generating stations. Impacts were largest at sites in North Dakota and Montana that are closest to the most recent drilling activity.

Implications: The increase in oil and gas activities in the Bakken region of North Dakota and surrounding areas has had a discernible impact on airborne particulate concentrations that impact visibility at protected sites in the region. However, the impact has been at least partially offset by a concurrent reduction in emissions from coal-fired electric generating stations. Continuing the recent reductions in flaring would likely be beneficial for the regional visual air quality.     

Circular Makerspaces: the founder’s view

Abstract

Makerspaces – open access design and fabrication workshops – provide new contexts for design practice through ‘distributed production’. The global community of makerspaces has evolved quickly and in turn, substantial hype is attributed to its potential for radical sustainable innovation. In this article, we explore this potential in the context of the new ‘circular economy’ agenda. We focus the research on the critical role of makerspace managers/founders who are recognised as gatekeepers to circular practices. The research method is action-led including expert interviews (academics and founders/managers) as well as two generative context-mapping workshops, run at selected makerspaces in collaboration with their founders/managers. We unearth everyday ‘how-to’ guidance to interweave circular practices within makerspaces from the outset by: fostering an enabling culture; building local connections; nurturing individual/community capacities; and stimulating practical know-how. However, while the research reveals immense opportunities to cultivate circular literacy from within makerspaces, the prospects to ask more profound questions about our economy, through makerspace practices, are found to be compromised by day-to-day concerns. The insights from this research can act as a starting point for future work in this emerging research area.     

Trace-level beryllium analysis in the laboratory and in the field: state of the art, challenges and opportunities

Control of workplace exposure to beryllium is a growing issue in the United States and other nations. As the health risks associated with low-level exposure to beryllium are better understood, the need increases for improved analytical techniques both in the laboratory and in the field. These techniques also require a greater degree of standardization to permit reliable comparison of data obtained from different locations and at different times. Analysis of low-level beryllium samples, in the form of air filters or surface wipes, is frequently required for workplace monitoring or to provide data to support decision-making on implementation of exposure controls. In the United States and the United Kingdom, the current permissible exposure level is 2 microg m(-3) (air) and the United States Department of Energy has implemented an action level of 0.2 microg m(-3) (air) and 0.2 microg/100 cm(2) (surface). These low-level samples present a number of analytical challenges, including (1) a lack of suitable standard reference materials, (2) unknown robustness of sample preparation techniques, (3) interferences during analysis, (4) sensitivity (sufficiently low detection limits), (5) specificity (beryllium speciation) and (6) data comparability among laboratories. Additionally, there is a need for portable, real-time (or near real-time) equipment for beryllium air monitoring and surface wipe analysis that is both laboratory-validated and field-validated in a manner that would be accepted by national and/or international standards organizations. This paper provides a review of the current analytical requirements for trace-level beryllium analysis for worker protection and also addresses issues that may change those requirements. The current analytical state of the art and relevant challenges facing the analytical community will be presented, followed by suggested criteria for real-time monitoring equipment. Recognizing and addressing these challenges will present opportunities for laboratories, research and development organizations, instrument manufacturers and others.     

The Effects of Small Dam Removal on the Distribution of Sedimentary Contaminants

With increasing concern over degradation of aquatic resources, issues of liability, and maintenance costs, removal of small dams has become increasing popular. Although the benefits of removal seem to outweigh the drawbacks, there is a relative paucity of studies documenting the extent and magnitude of biological and chemical changes associated with dam removal, especially those evaluating potential changes in contaminant inventories. In August and November of 2000, a run-of-the-river dam on Manatawny Creek (southeast Pennsylvania) was removed in a two-stage process. To assess the effects of dam removal on the contaminant redistribution within the creek, sedimentary concentrations of polychlorinated biphenyls (PCBs), polycyclic aromatic hydrocarbons (PAHs), and trace metals (Cd, Cr, Cu, Ni, Pb, Zn) were evaluated prior to and several months after removal. Pre- and post-removal analyses revealed elevated and spatially variable concentrations of total PAHs (ranging from approximately 200 to 81,000 ng(g dry weight) and low to moderate concentrations of trace metals and PCBs. The concentrations of these sedimentary contaminants pre- versus post-removal were not significantly different. Additionally, though the impoundment received storm water run-off and associated contaminants from the adjacent city of Pottstown, the total inventory of fine-grain sediments in the impoundment prior to removal was very low. The removal of the low-level Manatawny Creek dam did not significantly redistribute contaminants downstream. However, each dam removal should be assessed on a case by case basis where the potential of sedimentary contaminant redistribution upon dam removal exists.     

Understanding public perceptions of risk regarding outdoor pet cats to inform conservation action

Free‐ranging domestic cats (Felis catus) incur and impose risks on ecosystems and represent a complex issue of critical importance to biodiversity conservation and cat and human health globally. Prior social science research on this topic is limited and has emphasized feral cats even though owned cats often comprise a large proportion of the outdoor cat population, particularly in urban areas. To address this gap, we examined public risk perceptions and attitudes toward outdoor pet cats across varying levels of urbanization, including along the wildland–urban interface, in Colorado (U.S.A.), through a mail survey of 1397 residents. Residents did not view all types of risks uniformly. They viewed risks of cat predation on wildlife and carnivore predation on cats as more likely than disease‐related risks. Additionally, risk perceptions were related to attitudes, prior experiences with cats and cat–wildlife interactions, and cat‐owner behavior. Our findings suggest that changes in risk perceptions may result in behavior change. Therefore, knowledge of cat‐related risk perceptions and attitudes could be used to develop communication programs aimed at promoting risk‐aversive behaviors among cat owners and cat‐management strategies that are acceptable to the public and that directly advance the conservation of native species.     

The Effects of Three Chemical Algaecides on Cell Numbers and Toxin Content of the Cyanobacteria Microcystis aeruginosa and Anabaenopsis sp.

Toxic cyanobacteria blooms are a growing concern for public health and safety, due in part to the production of the hepatotoxin microcystin by certain species, including Microcystis aeruginosa. Management strategies for controlling cyanobacteria blooms include algaecide treatments, often with copper sulfate, and more recently oxidizers such as sodium percarbonate that produce hydrogen peroxide. This study assessed the effects of two copper-containing algaecides and one sodium percarbonate-containing algaecide on mitigating cell numbers and toxin content of cultured M. aeruginosa and summer (July) bloom samples of Anabaenopsis sp. in a brackish stormwater detention pond. Monitoring of the bloom revealed that Anabaenopsis sp. was associated with elevated levels of orthophosphate compared to nitrogen (dissolved inorganic nitrogen to phosphorus ratios were 0.19–1.80), and the bloom decline (September–October) was likely due to lower autumn water temperatures combined with potential grazing by the dinoflagellate Protoperidinium quinquecorne. Laboratory-based algaecide experiments included three dose levels, and cyanobacteria cell numbers and microcystin concentrations (particulate and dissolved) were evaluated over 7 d. Following exposure, copper-containing treatments generally had lower cell numbers than either sodium percarbonate-containing or control (no algaecide) treatments. Addition of algaecides did not reduce overall microcystin levels, and a release of toxin from the particulate to dissolved phase was observed in most treatments. These findings indicate that algaecide applications may visibly control cyanobacteria bloom densities, but not necessarily toxin concentrations, and have implications for public health and safety.     

Assessment of pilot direct contact membrane distillation regeneration of lithium chloride solution in liquid desiccant air-conditioning systems using computer simulation

Environmental Science and Pollution Research - Membrane distillation (MD) has been increasingly explored for treatment of various hyper saline waters, including lithium chloride (LiCl) solutions...     

Conducting conservation social science surveys online

The coronavirus (COVID-19) pandemic is affecting the environment and conservation research in fundamental ways. Many conservation social scientists are now administering survey questionnaires online, but they must do so while ensuring rigor in data collection. Further, they must address a suite of unique challenges, such as the increasing use of mobile devices by participants and avoiding bots or other survey fraud. We reviewed recent literature on online survey methods to examine the state of the field related to online data collection and dissemination. We illustrate the review with examples of key methodological decisions made during a recent national study of people who feed wild birds, in which survey respondents were recruited through an online panel and a sample generated via a project participant list. Conducting surveys online affords new opportunities for participant recruitment, design, and pilot testing. For instance, online survey panels can provide quick access to large and diverse samples of people. Based on the literature review and our own experiences, we suggest that to ensure high-quality online surveys one should account for potential sampling and nonresponse error, design survey instruments for use on multiple devices, test the instrument, and use multiple protocols to identify data quality problems. We also suggest that research funders, journal editors, and policy makers can all play a role in ensuring high-quality survey data are used to inform effective conservation programs and policies.