Application of enzyme-linked immunosorbent assay analysis for determination of monensin in environmental samples

There is growing concern that antibiotic use in livestock production is contributing to contamination of soil and aquatic environments. Monensin, a polyether ionophore antibiotic, accounts for approximately 13% of total subtherapeutic livestock antibiotic usage in the USA and has been widely detected in aquatic environments. Due to insufficient ultraviolet absorbance, liquid chromatography analysis of monensin in environmental samples is limited to equipment with mass spectrometry (e.g., liquid chomatography-mass spectrometry [LC-MS]). However, LC-MS equipment is costly, and extensive sample preparation and clean-up is often required. Rapid, low-cost analytical techniques are needed to monitor for monensin residues in the environment. In this study, a commercially available enzyme-linked immunosorbent assay (ELISA) for detecting monensin in animal feed extracts was evaluated for determination of monensin in water, soil, and manure. The monensin ELISA was highly sensitive, with limits of detection and quantification at 1.5 and 3.0 microg L(-1), respectively. Recovery of monensin in spiked water samples was approximately 100%. Cross-reactivity was not observed with similar polyether ionophores, tetracyclines, macrolides, or sulfonamides. Concentrations of monensin using ELISA were greater than concentrations measured with LC-MS. This is attributed to cross-reactivity of the monensin ELISA toward structurally similar monensin compounds, such as factors (slight naturally produced structural variants) and metabolites. Results from this study showed that ELISA can be a reliable, rapid, and low-cost alternative to LC-MS analysis of environmental samples.     

Is moral hazard good for the environment? Revenue insurance and chemical input use

Using farm level data we evaluate the input use and environmental effects of revenue insurance. A priori, the moral hazard effect on input use is indeterminate. This paper empirically assesses the input use impact of the increasingly popular, and federally subsidized, risk management instrument of revenue insurance and the extent to which its effects on input use may differ from those of the older yield based instruments. We conclude that among winter wheat farmers, those who purchase revenue insurance tend to spend less on fertilizers but do not appreciably alter pesticide expenditures. Thus, any improved environmental outcomes due to crop insurance are likely due to reduced fertilizer not pesticide use. When the environmental indicators included indicated a potential environmental fragility (i.e. high erosion, pesticide leaching or pesticide runoff potential), the input use equation suggested that fertilizer expenditures decreased. Revenue insurance undoubtedly further reduces fertilizer applications on these fields as well, but the marginal environmental benefit of revenue insurance is lessened because the reduction, where it matters most, accrues on land on which fertilizer use has already been curtailed to some degree.     

Effect of photoperiod on the adrenal activities of male rose ringed parakeet, Psittacala krameri

Adult male rose ringed parakeets were exposed to very long photoperiod (22 hr L: 2 hr D) and very short photoperiod (2 hr L: 22 hr D) daily for 60 days during different phases of the annual testicular cycle. Adrenal activities of the experimental birds were compared with that of parallel held natural photoperiodic birds. Marked atrophy of adrenocortical cells was noted in the glands of long photoperiod (22 hr L:2 hr D) during different phases, i.e., post-breeding, quiescent and pre-breeding phases of annual gonadal cycle. The atrophied cells were not uniformly distributed in different groups of long photoperiod responsive birds. During pre-breeding, post-breeding and quiescent phases marked atrophy of the adrenocortical cells were restricted to the sub capsular zone of the gland. The cytometric and karyometric studies also revealed significant decrease in the cortical cord width and diameter of nuclei in the cortical cells in either subcapsular zone in the gland of long photoperiodic birds considered for treatment during pre-breeding, post-breeding and quiescent phase or in both the sub capsular zone and the inner zone. The cytometric and karyometric values did not show any change from control birds.     

Computational analysis of turbulence enhancement in a compression ignition engine with modified inlet design

Environmental Science and Pollution Research - This study aims to enhance the turbulence of direct injection (DI) diesel engine by modifying the inlet manifold design with an inclined nozzle-like...     

Explosibility of micron- and nano-size titanium powders

Explosibility of micron- and nano-titanium was determined and compared according to explosion severity and likelihood using standard dust explosion equipment. ASTM methods were followed using a Siwek 20-L explosion chamber, MIKE 3 apparatus and BAM oven. The explosibility parameters investigated for both size ranges of titanium include explosion severity (maximum explosion pressure (P_max) and size-normalized maximum rate of pressure rise (K_St)) and explosion likelihood (minimum explosible concentration (MEC), minimum ignition energy (MIE) and minimum ignition temperature (MIT)). Titanium particle sizes were ?100 mesh (<150 μm), ?325 mesh (<45 μm), ≤20 μm, 150 nm, 60–80 nm, and 40–60 nm. The results show a significant increase in explosion severity as the particle size decreases from ?100 mesh with an apparent plateau being reached at ?325 mesh and ≤20 μm. Micron-size explosion severity could not be compared with that for nano-titanium due to pre-ignition of the nano-powder in the 20-L chamber. The likelihood of an explosion increases significantly as the particle size decreases into the nano range. Nano-titanium is very sensitive and can self-ignite under the appropriate conditions. The explosive properties of the nano-titanium can be suppressed by adding nano-titanium dioxide to the dust mixture. Safety precautions and procedures for the nano-titanium are also discussed.     

Trends and Perspectives of Biosensors for Food and Environmental Virology

Food and environmental virology has become a very important and interesting area of research because of food safety and public health concerns. During the last few decades, increasing foodborne diseases and environmental generated illnesses are considered to be highly challenging issues. Biosensor technology holds great promise for the healthcare market, and the security sector. Similar to clinical diagnostic tools, biosensors are being developed for the rapid, reliable, yet inexpensive identification and enumeration of pathogenic viruses which are adulterating environment, food and feed commodities. In this modern era, bio-and nano-technologies play a pivotal role in virological diagnostics of food industry, environmental and veterinary samples. This review covers the recent advances and future prospects of nanotechnology-based bioanalytical microsystems for food and environmental virology.     

Desulfurization of dibenzothiophene（DBT） by a novel strain Lysinibacillus sphaericus DMT-7 isolated from diesel contaminated soil

A new bacterial strain DMT-7 capable of selectively desulfurizing dibenzothiophene (DBT) was isolated from diesel contaminated soil. The DMT-7 was characterized and identified as Lysinibacillus sphaericus DMT-7 (NCBI GenBank Accession No. GQ496620) using 16S rDNA gene sequence analysis. The desulfurized product of DBT, 2-hydroxybiphenyl (2HBP), was identified and confirmed by high performance liquid chromatography analysis and gas chromatography-mass spectroscopy analysis respectively. The desulfurization kinetics revealed that DMT-7 started desulfurization of DBT into 2HBP after the lag phase of 24 hr, exponentially increasing the accumulation of 2HBP up to 15 days leading to approximately 60% desulfurization of the DBT. However, further growth resulted into DBT degradation. The induced culture of DMT-7 showed shorter lag phase of 6 hr and early onset of stationary phase within 10 days for desulfurization as compared to that of non-induced culture clearly indicating the inducibility of the desulfurization pathway of DMT-7. In addition, Lysinibacillus sphaericus DMT-7 also possess the ability to utilize broad range of substrates as sole source of sulfur such as benzothiophene, 3,4-benzo DBT, 4,6-dimethyl DBT, and 4,6-dibutyl DBT. Therefore, Lysinibacillus sphaericus DMT-7 could serve as model system for efficient biodesulfurization of diesel and petrol.     

Remarkable sunlight-driven photocatalytic performance of Ag-doped ZnO nanoparticles prepared by green synthesis for degradation of emerging pollutants in water

Environmental Science and Pollution Research - In this work, Ag-doped ZnO nanoparticles (NPs) were synthesized by a simple green method using a toxic agent-free route for photocatalytic purposes,...     

The importance of space, time, and stochasticity to the demography and management of Alliaria petiolata

As population modeling is increasingly called upon to guide policy and management, it is important that we understand not only the central tendencies of our study systems, but the consequences of their variation in space and time as well. The invasive plant Alliaria petiolata (garlic mustard) is actively managed in the United States and is the focus of a developing biological control program. Two weevils (Coleoptera: Curculionidae: Ceutorhynchus) that reduce fecundity (C. alliariae) and rosette survival plus fecundity (C. scrobicollis) are under consideration for release pending host specificity testing. We used a demographic modeling approach to (1) quantify variability in A. petiolata growth and vital rates and (2) assess the potential for single- or multiple-agent biocontrol to suppress growth of 12 A. petiolata populations in Illinois and Michigan studied over three plant generations. We used perturbation analyses and simulation models with stochastic environments to estimate stochastic growth rates (lambda(S)) and predict the probability of successful management using either a single biocontrol agent or two agent species together. Not all populations exhibited invasive dynamics. Estimates of lambda(S) ranged from 0.78 to 2.21 across sites, while annual, deterministic growth (lambda) varied up to sevenfold within individual sites. Given our knowledge of the biocontrol agents, this analysis suggests that C. scrobicollis alone may control A. petiolata at up to 63% of our study sites where lambda >1, with the combination of both agents predicted to succeed at 88% of sites. Across sites and years, the elasticity rankings were dependent on lambda. Reductions of rosette survival, fecundity, or germination of new seeds are predicted to cause the greatest reduction of lambda in growing populations. In declining populations, transitions affecting seed bank survival have the greatest effect on lambda. This contrasts with past analyses that varied parameters individually in an otherwise constant matrix, which may yield unrealistic predictions by decoupling natural parameter covariances. Overall, comparisons of stochastic and deterministic growth rates illustrate how analyses of individual populations or years could misguide management or fail to characterize complex traits such as invasiveness that emerge as attributes of populations rather than species.     

Development and demonstration of a free surface flow-dependent sampling technology

Statistical assessment of water quality data, obtained at the South Florida Water Management District (West Palm Beach, Florida) S-65E structure, illustrated significant differences and inconsistency in nutrient concentrations (Daas and Ebadian, 2003). The evaluation showed that currently used water sampling techniques are inadequate because of deficiencies in functionality and sensitivity to flow conditions at the structure. Moreover, the study indicated the need for a more precise sampling technology, which would consider variations in the velocity profile across the water column during the sampling process. Therefore, a new prototype sampling technology was designed and tested in a pilot open channel. The new sampler had the capability to collect discrete aliquot volumes of water samples that are proportional to the corresponding point velocity at each of these depths. The discrete aliquot volumes were blended to provide an integrated sample that captures the variations in the velocity profile.