Application of enzyme-linked immunosorbent assay analysis for determination of monensin in environmental samples

There is growing concern that antibiotic use in livestock production is contributing to contamination of soil and aquatic environments. Monensin, a polyether ionophore antibiotic, accounts for approximately 13% of total subtherapeutic livestock antibiotic usage in the USA and has been widely detected in aquatic environments. Due to insufficient ultraviolet absorbance, liquid chromatography analysis of monensin in environmental samples is limited to equipment with mass spectrometry (e.g., liquid chomatography-mass spectrometry [LC-MS]). However, LC-MS equipment is costly, and extensive sample preparation and clean-up is often required. Rapid, low-cost analytical techniques are needed to monitor for monensin residues in the environment. In this study, a commercially available enzyme-linked immunosorbent assay (ELISA) for detecting monensin in animal feed extracts was evaluated for determination of monensin in water, soil, and manure. The monensin ELISA was highly sensitive, with limits of detection and quantification at 1.5 and 3.0 microg L(-1), respectively. Recovery of monensin in spiked water samples was approximately 100%. Cross-reactivity was not observed with similar polyether ionophores, tetracyclines, macrolides, or sulfonamides. Concentrations of monensin using ELISA were greater than concentrations measured with LC-MS. This is attributed to cross-reactivity of the monensin ELISA toward structurally similar monensin compounds, such as factors (slight naturally produced structural variants) and metabolites. Results from this study showed that ELISA can be a reliable, rapid, and low-cost alternative to LC-MS analysis of environmental samples.     

Influence of indoor transport and mixing time scales on the performance of sensor systems for characterizing contaminant releases

Optimizing real-time sensor systems to detect and identify relevant characteristics of an indoor contaminant event is a challenging task. The interpretation of incoming sensor data is confounded by uncertainties in building operation, in the forces driving contaminant transport, and in the physical parameters governing transport. In addition, simulation tools used by the sensor interpretation algorithm introduce modeling uncertainties. This paper explores how the time scales inherent in contaminant transport influence the information that can be extracted from real-time sensor data. In particular, we identify three time scales (within room mixing, room-to-room transport, and removal from the building) and study how they affect the ability of a Bayesian Monte Carlo (BMC) sensor interpretation algorithm to identify the release location and release mass from a set of experimental data, recorded in a multi-floor building. The research shows that some limitations in the BMC approach do not depend on details of the models or the algorithmic implementation, but rather on the physics of contaminant transport. These inherent constraints have implications for the design of sensor systems.     

Optimizing the position of insulating materials in flat roofs exposed to sunshine to gain minimum heat into buildings under periodic heat transfer conditions

Building roofs are responsible for the huge heat gain in buildings. In the present work, an analysis of the influence of insulation location inside a flat roof exposed directly to the sun’s radiation was performed to reduce heat gain in buildings. The unsteady thermal response parameters of the building roof such as admittance, transmittance, decrement factor, and time lags have been investigated by solving a one-dimensional diffusion equation under convective periodic boundary conditions. Theoretical results of four types of walls were compared with the experimental results available in literature. The results reveal that the roof with insulation placed at the outer side and at the center plane of the roof is the most energy efficient from the lower decrement factor point of view and the roof with insulation placed at the center plane and the inner side of the roof is the best from the highest time lag point of view among the seven studied configurations. The composite roof with expanded polystyrene insulation located at the outer side and at the center plane of the roof is found to be the best roof from the lowest decrement factor (0.130) point of view, and the composite roof with resin-bonded mineral wool insulation located at the center plane and at the inner side of the roof is found to be energy efficient from the highest time lag point (9.33 h) of view among the seven configurations with five different insulation materials studied. The optimum fabric energy storage thicknesses of reinforced cement concrete, expanded polystyrene, foam glass, rock wool, rice husk, resin-bonded mineral wool, and cement plaster were computed. From the results, it is concluded that rock wool has the least optimum fabric energy storage thickness (0.114 m) among the seven studied building roof materials.     

Resolving complexities in healthcare waste management: a goal programming approach.

The wide variety of activities at healthcare facilities generates different types of waste. There is always a danger of spreading infection due to mishandling of infectious waste or sharps. Hence, a variety of policies and actions have been taken to improve healthcare waste management systems. A large body of literature is available which suggests methods for tackling different problematic situations but management is confronted with a variety of complex problems, such as the choice of technological options to control infection, legal and budget restrictions and the timely removal of waste, which can, at times, conflict with each other. Hence, a planning model is presented that is based on a trans-shipment goal programming approach wherein the waste flow is optimized for multiple objectives under different priority structures or with different relative importance (weights). The use of the model is demonstrated as a decision-making tool that would help the management to understand the effects of their policies on the system performance. The model is validated for a case application representing a real-life situation. It can be easily seen that, in the case in which the management is biased toward a higher level of safety protection towards infection control, they have to compromise on cost control and to some extent on environmental pollution control.     

Lead content in new decorative paints in India

The paint industry in India is broadly classified into two categories: organized sector and unorganized sector. Multinational and big Indian companies form the organized sector, whereas the small- and medium-scale industries which produce paints for the local market form the unorganized sector. The present study was undertaken to determine the level of lead in decorative paints in India. A total of 148 paint samples sourced from four organized sector companies and six unorganized sector companies were analyzed for the total lead content. Results of this study reveal that 39 % of the total paints tested (n = 148) contain lead more than 300 ppm, the voluntary limit prescribed by Bureau of Indian Standards, BIS (IS 15489:2011), and 45 % of the tested paints contain lead more than 90 ppm, the US limit. Further analysis of the data indicates that only 5 % of the tested paints manufactured by organized sector companies contain lead more than 300 ppm (n = 91), whereas 93 % of the tested paints manufactured by unorganized sector companies contain lead more than 300 ppm (n = 57). Comparison with earlier reported data suggests that while organized sector companies are gradually abandoning the use of lead-based compounds in their paints, the unorganized sector companies are still adding lead-based compounds intentionally in their paints despite the potential health hazards associated with it. The maximum concentration of lead obtained was 80,350 ppm in one of the paints manufactured by an unorganized sector company. The presence of high concentration of lead in yellow and green color paints indicates that color can be a predictor of lead content in decorative paints.     

Sub-basin scale characterization of climate change vulnerability, impacts and adaptation in an Indian River basin

Knowledge of climate change vulnerability and impacts is a prerequisite for formulating locally relevant climate change adaptation policies. A participatory approach has been used in this study to determine climate change vulnerability, impacts and adaptation aspects for the Kangsabati River basin, India. The study approach involved engaging with stakeholders representing state (sub-national), district and community levels, through an interactive brainstorming method, to understand stakeholder perceptions regarding (a) local characteristics which influence vulnerability, (b) climate change impacts and (c) relevant adaptation options. The study reveals that vulnerability varies across upstream, midstream and downstream sections of the river basin. Suggested adaptation options, in this predominantly agricultural basin, are found to be applicable across spatial scales. Stakeholder perceptions, regarding vulnerability and impacts, vary with the level of interaction, academic background and type of experience. Interaction confirms the notion that stakeholders have inherent knowledge regarding adaptation, reveals their preferences and ability to think unconventionally. We discuss limitations of the approach while demonstrating its ability to deliver locally relevant and acceptable adaptation options, which could facilitate implementation. We conclude that engaging stakeholders at multiple levels was highly effective in assessing locally relevant aspects of climate change vulnerability, impacts and applicable adaptation options in the Kangsabati River basin. Based on this assessment, a sub-basin scale is recommended for evaluating these aspects, especially for water resources and agricultural systems, through multi-level stakeholder input.     

Optimum techno-eco performance requisites for vacuum annulus tube collector–assisted double-slope solar desaltification unit integrated modified parabolic concentrator

Environmental Science and Pollution Research - This work presents a novel approach for a double-slope solar desaltification system having parallel array of evacuated annular tube collectors with...