Nanoscale materials as sorbents for nitrate and phosphate removal from water

Excessive nitrogen (N) and phosphorous (P) release into run-off waters from human activities is a major cause of eutrophication. Several techniques are available to remove N and P-containing pollutants, such as chemical precipitation, biological treatment, membrane processes, electrolytic treatment, ion-exchange and adsorption. In order to remove low concentration levels of nitrate and phosphate, adsorption is a cost-effective solution. In this review, we present a list of nanoscale adsorbents such as zero-valent metal, metal oxides/metal hydroxides, and carbon-based materials. We discuss their adsorption capacities, isotherms, kinetics and mechanisms.     

Effect of diethyl ether and ethanol as an oxygenated additive on Calophyllum inophyllum biodiesel in CI engine

Environmental Science and Pollution Research - The present experimental investigation is conducted to examine the working characteristics of compression ignition (CI) engine using oxygenated...     

Effect of physical properties of synthesized protic ionic liquid on carbon dioxide absorption rate

Environmental Science and Pollution Research - The concentration of carbon dioxide gas has accelerated over the last two decades which cause drastic changes in the climatic conditions. In...     

Explosibility of polyamide and polyester fibers

The current research is aimed at investigating the explosion behavior of hazardous materials in relation to aspects of particulate size. The materials of study are flocculent (fibrous) polyamide 6.6 (nylon) and polyester (polyethylene terephthalate). These materials may be termed nontraditional dusts due to their cylindrical shape which necessitates consideration of both particle diameter and length. The experimental work undertaken is divided into two main parts. The first deals with the determination of deflagration parameters for polyamide 6.6 (dtex 3.3) for different lengths: 0.3 mm, 0.5 mm, 0.75 mm, 0.9 mm and 1 mm; the second involves a study of the deflagration behavior of polyester and polyamide 6.6 samples, each having a length of 0.5 mm and two different values of dtex, namely 1.7 and 3.3. (Dtex or decitex is a unit of measure for the linear density of fibers. It is equivalent to the mass in grams per 10,000 m of a single filament, and can be converted to a particle diameter.) The explosibility parameters investigated for both flocculent materials include maximum explosion pressure (P_max), size-normalized maximum rate of pressure rise (K_St), minimum explosible concentration (MEC), minimum ignition energy (MIE) and minimum ignition temperature (MIT). ASTM protocols were followed using standard dust explosibility test equipment (Siwek 20-L explosion chamber, MIKE 3 apparatus and BAM oven). Both qualitative and quantitative analyses were undertaken as indicated by the following examples. Qualitative observation of the post-explosion residue for polyamide 6.6 indicated a complex interwoven structure, whereas the polyester residue showed a shiny, melt-type appearance. Quantitatively, the highest values of P_max and K_St were obtained at the shortest length and finest dtex for a given material. For a given length, polyester displayed a greater difference in P_max and K_St at different values of dtex than polyamide 6.6. Long ignition delay times were observed in the BAM oven (MIT measurements) for polyester, and video framing of explosions in the MIKE 3 apparatus (MIE measurements) enabled observation of secondary ignitions caused by flame propagation after the initial ignition occurring at the spark electrodes.     

Survey of nitrogen use pattern in rice in the irrigated rice-wheat cropping system of Haryana, India

Seeing the sustainability of rice-wheat cropping system (RWCS) of the Indo-Gangetic Plain, adequate crop nutrition in general and nitrogen (N) in particular holds the key to sound crop management. The excessive application or insufficient management of N means an economic loss to the farmer and may lead to yield penalties and environmental problems. Improving N management in consonance with other nutrients is much important to break yield plateaus as breeding for high yielding is not happening in recent years. Findings from farm survey are used to evaluate the on-farm N management practices in rice crop of the study area. The crop management practices (especially time of sowing/transplanting and irrigation requirement) and resource base of the farmers decided the N use pattern of the farmers. The N(Physical optimum) and N(economic optimum) exceeding the recommended levels revealed the apparent need for the revalidation of the existing recommendations. Paddy yield increased significantly within different rice types. This study generated comprehensive data on N use pattern in rice in the study area.     

Test methodology for determining the incendiary nature and electrostatic discharge characteristics of plastic surfaces

This experimental study was originally designed to quantify the electrostatic characteristics of offshore grade fiberglass reinforced plastic (FRP) pipes [Dastidar, A. G., Dahn, C. J., Cole, B. W., & Lo, K. H. (2005a). Electrostatic characteristics of FRP pipes. In Fourth international conference on composite materials for offshore operation, Houston, TX, Oct 4–6, 2005]. Discharge energies were measured from the sample surfaces for each test condition after an aggressive corona charging of up to −40 kV. While the measured values of total discharge energy were relatively high for some samples, the energy in the first peak was significantly lower. The first peak energy is thought to be the most significant measure in establishing the potential for incendive events.

To further quantify the incendive potential of discharges from FRP pipes, a unique test method was developed [Dastidar, A. G., Dahn, C. J., Cole, B. W., & Lo, K. H., (2005b). Incendiary nature and electrostatic discharge characteristics of FRP pipes. In Fourth international conference on composite materials for offshore operation, Houston, TX, Oct 4–6, 2005]. The methodology has been expanded to include other FRP components. This paper describes the test method and the test results obtained for testing several FRP structures and materials (pipes, grill work, railing etc.). The significance of the experimental results to industry is also discussed.     

Fabrication of Bi2O3/TiO2 nanocomposites and their applications to the degradation of pollutants in air and water under visible-light

A nanoheterojunction composite photocatalyst Bi2O3/TiO2working under visible-light(λ 420 nm) was prepared by combining two semiconductors Bi2O3 and TiO2 varying the Bi2O3/TiO2molar ratio. Maleic acid was employed as an organic binder to unite Bi2O3 and TiO2 nanoparticles. The SEM, TEM, XRD and diffuse reflectance spectra were utilized to characterize the prepared Bi2O3/TiO2nanoheterojunction. The nanocomposite exhibited unusual high photocatalytic activity in decomposing 2-propanol in gas phase and phenol in aqueous phase and, evolution of CO2 under visible light irradiation while the end members exhibited low photocatalytic activity. The composite was optimized to 5 mol% Bi2O3/TiO2. The remarkable high photocatalytic efficiency originates from the unique relative energy band position of Bi2O3 and TiO2 as well as the absorption of visible light by Bi2O3.     

Resource recovery through bioremediation of wastewaters and waste carbon by microalgae: a circular bioeconomy approach

Environmental Science and Pollution Research - Microalgal biomass–based biofuels are a promising alternative to fossil fuels. Microalgal biofuels’ major obstacles are the water and...     

Sustainable solid waste management: An integrated approach for Asian countries

Solid waste management (SWM) has been an integral part of every human society. The approaches for SWM should be compatible with the nature of a given society, and, in this regard, Asian countries are no exception. In keeping with global trends, the systems are being oriented to concentrate on sustainability issues; mainly through the incorporation of 3R (reduce, reuse and recycle) technologies. However, degree and nature of improvements toward sustainability are varying and depend on the economic status of a country. High-income countries like Japan and South Korea can afford to spend more to incorporate 3R technologies. Most of the latest efforts focus on “Zero Waste” and/or “Zero Landfilling” which is certainly expensive for weaker economies such as those of India or Indonesia. There is a need to pragmatically assess the expectations of SWM systems in Asian countries. Hence, in this paper, we analyze the situation in different Asian countries, and explore future trends. We conceptually evaluate issues surrounding the sustainability of SWM. We propose a multi-pronged integrated approach for improvement that achieves sustainable SWM in the context of national policy and legal frameworks, institutional arrangement, appropriate technology, operational and financial management, and public awareness and participation. In keeping with this approach, a generic action plan has been proposed that could be tailored to suit a situation in a particular country. Our proposed concept and action plan framework would be useful across a variety of country-specific scenarios.     

Use of adjuvants to minimize leaching of herbicides in soil

Excessive leaching of herbicides affects their efficacy against target weeds and results in contamination of groundwater. Use of adjuvants that can weakly bind herbicides and in turn release them slowly is a valuable technique to prolong the efficacy of herbicides and to minimize their leaching into groundwater. Effects of activated charcoal, three humic substances (Enersol SP 85%, Enersol 12%, and Agroliz), or a synthetic polymer (Hydrosorb) on the leaching of bromacil, dicamba, and simazine were investigated in leaching columns using a Candler fine sand (Typic Quartzipsamment). The addition of adjuvants had no harmful effects on physical properties of the soil as evident from lack of its affects on water percolation. When no adjuvants were used, 69%, 37%, and 4% of applied dicamba, bromacil, and simazine, respectively, were leached in the first pore volume of leachate (⋍3.2 cm rainfall). With five pore volumes of leachate (⋍16 cm rainfall), bromacil and dicamba were leached completely and only 80% of simazine was leached. Using Enersol 12% adjuvant resulted in a 13%–18% reduction in leaching of dicamba and bromacil in five pore volumes of leachate. The leaching of simazine was significantly decreased when any of the five adjuvants mentioned above were used. However, the decrease in leaching was significantly greater when using Enersol SP 85% or Enersol 12% (24%–28%) than when using the other adjuvants (12%–16%).