Use of adjuvants to minimize leaching of herbicides in soil

Excessive leaching of herbicides affects their efficacy against target weeds and results in contamination of groundwater. Use of adjuvants that can weakly bind herbicides and in turn release them slowly is a valuable technique to prolong the efficacy of herbicides and to minimize their leaching into groundwater. Effects of activated charcoal, three humic substances (Enersol SP 85%, Enersol 12%, and Agroliz), or a synthetic polymer (Hydrosorb) on the leaching of bromacil, dicamba, and simazine were investigated in leaching columns using a Candler fine sand (Typic Quartzipsamment). The addition of adjuvants had no harmful effects on physical properties of the soil as evident from lack of its affects on water percolation. When no adjuvants were used, 69%, 37%, and 4% of applied dicamba, bromacil, and simazine, respectively, were leached in the first pore volume of leachate (⋍3.2 cm rainfall). With five pore volumes of leachate (⋍16 cm rainfall), bromacil and dicamba were leached completely and only 80% of simazine was leached. Using Enersol 12% adjuvant resulted in a 13%–18% reduction in leaching of dicamba and bromacil in five pore volumes of leachate. The leaching of simazine was significantly decreased when any of the five adjuvants mentioned above were used. However, the decrease in leaching was significantly greater when using Enersol SP 85% or Enersol 12% (24%–28%) than when using the other adjuvants (12%–16%).     

Explosibility of polyamide and polyester fibers

The current research is aimed at investigating the explosion behavior of hazardous materials in relation to aspects of particulate size. The materials of study are flocculent (fibrous) polyamide 6.6 (nylon) and polyester (polyethylene terephthalate). These materials may be termed nontraditional dusts due to their cylindrical shape which necessitates consideration of both particle diameter and length. The experimental work undertaken is divided into two main parts. The first deals with the determination of deflagration parameters for polyamide 6.6 (dtex 3.3) for different lengths: 0.3 mm, 0.5 mm, 0.75 mm, 0.9 mm and 1 mm; the second involves a study of the deflagration behavior of polyester and polyamide 6.6 samples, each having a length of 0.5 mm and two different values of dtex, namely 1.7 and 3.3. (Dtex or decitex is a unit of measure for the linear density of fibers. It is equivalent to the mass in grams per 10,000 m of a single filament, and can be converted to a particle diameter.) The explosibility parameters investigated for both flocculent materials include maximum explosion pressure (P_max), size-normalized maximum rate of pressure rise (K_St), minimum explosible concentration (MEC), minimum ignition energy (MIE) and minimum ignition temperature (MIT). ASTM protocols were followed using standard dust explosibility test equipment (Siwek 20-L explosion chamber, MIKE 3 apparatus and BAM oven). Both qualitative and quantitative analyses were undertaken as indicated by the following examples. Qualitative observation of the post-explosion residue for polyamide 6.6 indicated a complex interwoven structure, whereas the polyester residue showed a shiny, melt-type appearance. Quantitatively, the highest values of P_max and K_St were obtained at the shortest length and finest dtex for a given material. For a given length, polyester displayed a greater difference in P_max and K_St at different values of dtex than polyamide 6.6. Long ignition delay times were observed in the BAM oven (MIT measurements) for polyester, and video framing of explosions in the MIKE 3 apparatus (MIE measurements) enabled observation of secondary ignitions caused by flame propagation after the initial ignition occurring at the spark electrodes.     

Enzyme-linked immunosorbent assay for ultratrace determination of antibiotics in aqueous samples

Two commercially available enzyme-linked immunosorbent assay (ELISA) kits that are commonly used for tylosin or tetracycline residues in meat and milk were adapted for ultratrace analysis of these antibiotics in surface and ground waters. These two antibiotics are commonly fed to swine, turkeys, and cattle at subtherapeutic doses for growth promotion purposes. Both ELISA techniques were found to be highly sensitive and selective for the respective antibiotics with detection limits of 0.10 and 0.05 microg L(-1) for tylosin and tetracycline, respectively. The recovery of both tylosin and tetracycline from spiked samples of lake waters, runoff samples, soil saturation extracts, and nanopure water was close to 100%. Tetracycline ELISA was highly specific for tetracycline and chlortetracycline but not for other forms of tetracycline (oxytetracycline, demeclocycline, and doxycycline). Analysis of a few liquid swine manure samples by liquid chromatography-mass spectrometry (LC-MS) showed lower concentrations for chlortetracycline as compared with concentrations obtained using ELISA. However, the concentrations of tylosin from ELISA were comparable with that of LC-MS. The lower concentrations of chlortetracycline obtained by LC-MS in manure samples indicate the presence of other similar or transformed compounds that were detected by ELISA but not determined by LC-MS. These results indicate that both ELISA kits can be useful tools for low-cost screening of tylosin, tetracycline, and chlortetracycline in environmental waters. Furthermore, both ELISA procedures are rapid, portable, and easily adaptable for testing of multiple samples simultaneously.     

A model of costs and resources for rural and peri-urban water supply and sanitation in the 1990s

This article develops a model of cost and financing strategies for rural and peri-urban water supply and sanitation. It suggests that significant progress towards the World Summit for Children's goal of universal access to water supply and sanitation can be made if a combination of strategies is adopted. On the cost side, significant cost reductions should be possible through efficiency in resource use and reduction of system management costs. On the financing side, it suggests restructuring the financing of the sector with improved efficiency and greater cost recovery in urban services; full recovery of operation and maintenance costs; cost sharing through community contributions in kind such as local labour and financially in rural and peri-urban water supply for basic levels of service depending on willingness and ability to pay and full cost recovery for higher levels of service; a high degree of cost recovery in rural and peri-urban sanitation; development of institutional structures for both collection and management of revenues; development of alternate financing mechanisms such as rural credit schemes and revolving funds, adapted in specific country contexts, including the required institutional mechanisms; and additional allocations from governments and external support agencies. Additional government or external financing alone, while critical, will not of itself lead to effectiveness in the use of resources. Equally, cost recovery alone cannot lead to universal access and sustainable solutions. A composite set of actions is needed within which building capacities of institutions and people is necessary for sustainability .     

GEOGRAPHIC VARIATION OF THE STATISTICAL PARAMETERS OF HYDROMETEOROLOGICAL DATA OF THE UNITED STATES1

ABSTRACT: Having determined various statistical parameters for five mean monthly hydrometeorological time series of the United States, directional variation of the autocorrelation numbers, their spatial distribution over the United States and statistical significances are presented in this paper. Two conceptually different approaches (one using directional strips of large combined watersheds and the other with analysis of variances) are employed to explore the geographic variation of the statistical parameters (autocorrelations and explained variances) in question. Results adequately indicate the correspondence between these variations and the observed topographic, climatologic and hydrologic characteristics over the United States.     

ROLE OF SYNTHETIC TIME SERIES IN HYDROMETEOROLOGICAL DATA ANALYSIS1

ABSTRACT: The use of synthetic time series (artificially simulated time series with specific and useful properties built into them) to increase the confidence in the statistical parameters of limited hydrometeorological time series is the subject matter of this paper. By constructing fourteen synthetic time series, a sensitivity analysis is performed to assess the net effect of nonstationarity, number of lags and small sample size on estimated spectral densities. Similarly, the effects of the harmonic-removal procedure on the resulting residual series and the confidence limits in cross spectral analysis are examined in the light of synthetic time series analysis. These analyses clearly indicate the useful supplemental role of synthetic time series in data analysis.     

Rapidly locating and characterizing pollutant releases in buildings

Releases of airborne contaminants in or near a building can lead to significant human exposures unless prompt response measures are taken. However, possible responses can include conflicting strategies, such as shutting the ventilation system off versus running it in a purge mode or having occupants evacuate versus sheltering in place. The proper choice depends in part on knowing the source locations, the amounts released, and the likely future dispersion routes of the pollutants. We present an approach that estimates this information in real time. It applies Bayesian statistics to interpret measurements of airborne pollutant concentrations from multiple sensors placed in the building and computes best estimates and uncertainties of the release conditions. The algorithm is fast, capable of continuously updating the estimates as measurements stream in from sensors. We demonstrate the approach using a hypothetical pollutant release in a five-room building. Unknowns to the interpretation algorithm include location, duration, and strength of the source, and some building and weather conditions. Two sensor sampling plans and three levels of data quality are examined. Data interpretation in all examples is rapid; however, locating and characterizing the source with high probability depends on the amount and quality of data and the sampling plan.     

Monitoring Long-Term Ecological Changes Through the Ecological Monitoring and Assessment Network: Science-Based and Policy Relevant

Ecological monitoring and its associated research programshave often provided answers to various environmental management issues. In the face of changing environmental conditions, ecological monitoring provides decision-makers with reliable information as they grapple with maintaining a sustainable economy and healthy environment. The EcologicalMonitoring and Assessment Network (EMAN) is a national ecological monitoring network consisting of (1) about 100 casestudy sites across the country characterized by long-term multi-disciplinary environmental work conducted by a multitudeof agencies (142 partners and counting); (2) a variety of lesscomprehensive yet more extensive monitoring sites; (3) a network where core monitoring variables of ecosystem change aremeasured; and (4) geo-referenced environmental observations. Environment Canada is the co-ordinating partner for the network through the EMAN Co-ordinating Office. EMAN's mission is to focus a scientifically-sound, policy-relevant ecosystem monitoring and research network based on (a) stabilizing a network of case-study sites operated by a varietyof partners, and (b) developing a number of cooperative dispersedmonitoring initiatives in order to deliver unique and needed goods and services. These goods and services include: (1) an efficient and cost-effective early warning system which detects,describes and reports on changes in Canadian ecosystems at a national or ecozone scale; and (2) cross-disciplinary and cross-jurisdictional assessments of ecosystem status, trends and processes. The early warning system and assessments of ecosystem status, trends and processes provide Environment Canada and partner organizations with timely information thatfacilitates increasingly adaptive policies and priority setting. Canadians are also informed of changes and trends occurring in Canadian ecosystems and, as a result, are betterable to make decisions related to conservation and sustainability.     

Enumeration of methanogens with a focus on fluorescence in situ hybridization

Methanogens, the members of domain Archaea are potent contributors in global warming. Being confined to the strict anaerobic environment, their direct cultivation as pure culture is quite difficult. Therefore, a range of culture-independent methods have been developed to investigate their numbers, substrate uptake patterns, and identification in complex microbial communities. Unlike other approaches, fluorescence in situ hybridization (FISH) is not only used for faster quantification and accurate identification but also to reveal the physiological properties and spatiotemporal dynamics of methanogens in their natural environment. Aside from the methodological aspects and application of FISH, this review also focuses on culture-dependent and -independent techniques employed in enumerating methanogens along with associated problems. In addition, the combination of FISH with micro-autoradiography that could also be an important tool in investigating the activities of methanogens is also discussed.     

Neem extract–blended nanocellulose derived from jackfruit peel for antibacterial packagings

Environmental Science and Pollution Research - The use of jackfruit peel as a source for natural and fully biodegradable “nanocellulose” (NC) for the production of bioplastics with...