Investigation of physico-chemical properties and microbial community during poultry manure co-composting process

Co-composting of poultry manure and rubber wood sawdust was performed with the ratio of 2:1 (V/V) for a period of 60 days. An investigation was carried out to study the extracellular enzymatic activities and structural degradation utilizing Fourier transform infrared spectroscopy (FT-IR), thermogravimetry and differential thermal analysis (TG/DTA) and scanning electron microscopy (SEM). The microbial succession was also determined by using denaturing gel gradient electrophoresis (DGGE). The compost was able to reach its highest temperature of 71°C at day 3 and stabilized between 30 and 40°C for 8 weeks. CMCase, FPase and β-glucosidase acted synergistically in order to degrade the cellulosic substrate. The xylanase activities increased gradually during the composting and reached the peak value of 11.637 U/g on day 35, followed by a sharp decline. Both LiP and MnP activities reached their peak values on day 35 with 0.431 and 0.132 U/g respectively. The FT-IR spectra revealed an increase in aromaticity and a decrease in aliphatic compounds such as carbohydrates as decomposition proceeded. TGA/DTG data exhibited significant changes in weight loss in compost samples, indicating degradation of organic matter. SEM micrographs showed higher amounts of parenchyma exposed on the surface of rubber wood sawdust at day 60, showing significant degradation. DGGE and 16S rDNA analyses showed that Burkholderia sp., Pandoraea sp., and Pseudomonas sp. were present throughout the composting process. Ornithinibacillus sp. and Castellaniella ginsengisoli were only found in the initial stage of the composting, while different strains of Burkholderia sp. also occurred in the later stage of composting.     

Adsorptive removal of iron and manganese ions from aqueous solutions with microporous chitosan/polyethylene glycol blend membrane

Microporous chitosan (CS) membranes were directly prepared by extraction of poly(ethylene glycol) (PEG) from CS/PEG blend membrane and were examined for iron and manganese ions removal from aqueous solutions. The different variables affecting the adsorption capacity of the membranes such as contact time, pH of the sorption medium, and initial metal ion concentration in the feed solution were investigated on a batch adsorption basis. The affinity of CS/PEG blend membrane to adsorb Fe(II) ions is higher than that of Mn(II) ions, with adsorption equilibrium achieved after 60 min for Fe(II) and Mn(II) ions. By increasing CS/PEG ratio in the blend membrane the adsorption capacity of metal ions increased. Among all parameters, pH has the most significant effect on the adsorption capacity, particularly in the range of 2.9-5.9. The increase in CS/PEG ratio was found to enhance the adsorption capacity of the membranes. The effects of initial concentration of metal ions on the extent of metal ions removal were investigated in detail. The experimental data were better fitted to Freundlich equation than Langmuir. In addition, it was found that the iron and manganese ions adsorbed on the membranes can be effectively desorbed in 0.1 mol/L HCl solution (up to 98% desorption efficiency) and the blend membranes can be reused almost without loss of the adsorption capacity for iron and manganese ions.     

Medium scale LNG-related experiments and CFD simulation of water curtain

This work is a continuation of the experimental research on LNG releases and their consequence mitigation methods, which has been carried on by the Mary Kay O’Connor Process Safety Center (MKOPSC) at the Texas A&M University since 2004.A series of medium scale experiments to test the ability of the water curtains to hold up and disperse a vapor has been performed. Colored smoke has been used as an analog of the LNG vapor for easier tracking of the vapor path through the water curtain. The results and some analysis of the experimental data are presented. The CFD software FLACS (GexCon AS) was used to simulate the effects of the water curtains on vapor dispersion. The results of the simulations were compared with experimental data.     

Effects of metolachlor on activities of enzymes in a malaysian soil

Abstract

Effects of metolachlor on the activities of cellulase, phosphatase, urease and protease in a loamy sand soil, were evaluated for up to 28 days. Metolachlor at 10 ppm and above caused a reduction in phosphatase and urease activities for the entire period of study. The cellulase activity decreased during the very first day of incubation compared to that of the control but a recovery trend was obvious at all concentrations from day 14 onwards. Protease activity was also reduced in the metolachlor treated soil and the lower activity was observed during the entire study.     

The anthropogenic atmospheric elements fraction: A new interpretation of elemental deposits on tree barks

The superficial deposit on the bark surface of several trees (mainly Fraxinus excelsior L.) was sampled in the experimental station of the university campus in Grenoble (France). Its composition was studied by scanning electron microscopy–energy dispersive X-ray emission (SEM–EDX) and, after digestion, by inductively coupled plasma-mass spectrometry (ICP-MS). The deposit was composed of 81.3% ± 7.4 organic matter, 9.4% ± 4.9 of geogenic minerals issued from the atmosphere (atmospheric geogenic fraction: AGF) and 9.3% ± 2.7 of a mixture of elements which was called anthropogenic atmospheric elements fraction (AAEF). The SEM–EDX analysis showed the presence of particles of geogenic compounds such as different types of silicates, phosphates, carbonates, sulphates, oxides and also particles of metals such as iron or of alloys of Fe–Zn, Fe–Ni, Ni–Cr and Ca sulphates or phosphates. Typical spheres of “fly ashes” composed of pure iron or Al-silicates were detected. Using the SEM–EDX analysis of the deposit and the average local soil composition, an empiric formula for the AGF (without polluting elements) was chosen, which presented a clear analogy with the global formula of the upper continental crust. In the same way, a formula for the pure organic matter fraction was chosen. Withdrawing the elements corresponding to these two fractions allows a tentative estimation of the content of the AAEF which was supposed to better represent the elemental anthropogenic contamination issued from the atmosphere. In the station, most of Sb, Cd, Sn, Pb, Cu, V and Zn were found in the AAEF. This AAEF composition was compared to that of the deposit in a highway tunnel where Pb and Cu were at a very high level. The meaning and the limits of the AAEF concept were critically discussed.     

Indoor air pollution evaluation with emphasize on HDI and biological assessment of HDA in the polyurethane factories

Today, many raw materials used in factories may have a dangerous effect on the physiological system of workers. One of them which is widely used in the polyurethane factories is diisocyanates. These compounds are widely used in surface coatings, polyurethane foams, adhesives, resins, elastomers, binders, and sealants. Exposure to diisocyanates causes irritation to the skin, mucous membranes, eyes, and respiratory tract. Hexamethylene diamine (HDA) is metabolite of hexamethylene diisocyanate (HDI). It is an excretory material by worker’s urine who is exposed to HDI. Around 100 air samples were collected from five defined factories by midget impinger which contained dimethyl sulfoxide absorbent as a solvent and tryptamine as reagent. Samples were analyzed by high-performance liquid chromatography with EC\UV detector using NIOSH 5522 method of sampling. Also, 50 urine samples collected from workers were also analyzed using William’s biological analysis method. The concentration of HDI into all air samples were more than 88 xxxμg/m³, and they have shown high concentration of pollutant in the workplaces in comparison with NIOSH standard, and all of the workers’ urine were contaminated by HDA. The correlation and regression test were used to obtain statistical model for HDI and HDA, which is useful for the prediction of diisocyanates pollution situation in the polyurethane factories.     

Fate of napropamide herbicide in selected Malaysian soils

This study was carried out to determine the sorption-desorption, degradation and leaching of napropamide in selected Malaysian soils. The sorption capacities of the selected Malaysian soils for napropamide were the following in descending order: Linau > Teringkap > Gunung Berinchang > Jambu > Rudua > Baging soil. The results indicate that napropamide degradation decreased with increasing soil sorption capacity. Napropamide was leached out earlier in the Baging soil than the other soils. Overall, the application of napropamide in the selected Malaysian soils would not pose a threat to the environment except in soil with low organic matter and clay content and high hydraulic conductivity, such as the Baging soil.     

Assessment of the spring water quality in The Shoubak area,Jordan

The present study investigates the physical, chemical, and biological characteristics of spring water samples in Shoubak area in the southern Jordan. The samples were collected from May 2004 to May 2005. All samples were analyzed for temperature, conductivity, dissolved oxygen, pH, major cations (Ca²⁺, Mg²⁺, K⁺, Na⁺), major anions (Cl⁻, NO₃⁻, HCO₃⁻, SO₄²⁻, PO₄³⁻, F⁻), and trace metals (Fe²⁺, Al³⁺, Mn²⁺, Cu²⁺, Cr³⁺, Ni²⁺, Zn²⁺, Pb²⁺, Cd²⁺). Water quality for available springs showed high salinity through long period of contact with rocks. The ion concentrations in the water samples were from dissolution of carbonate rocks and ion exchange processes in clay. The general chemistry of water samples was typically of alkaline earth waters with prevailing bicarbonate chloride. Some springs showed elevated nitrate and sulfate contents which could reflect to percolation from septic tanks, cesspools, and agricultural practices. The infiltration of wastewater from cesspools and septic tanks into groundwater is considered the major source of water pollution. The results showed that there were great variations among the analyzed samples with respect to their physical, chemical and biological parameters, which lie below the maximum permissible levels of the Jordanian and WHO drinking water standards. The results indicate that the trace metals of spring’s water of Shoubak area do not generally pose any health or environmental problems. Factor analysis was used to identify the contributers to water quality. The first factor represents major contribution from anthropogenic activities, while the second one represents major contribution from natural processes.     

Effect of meteorological parameters on fine and coarse particulate matter mass concentration in a coal-mining area in Zonguldak, Turkey

In this work, the effect of meteorological parameters and local topography on mass concentrations of fine (PM2.5) and coarse (PM2.5-10) particles and their seasonal behavior was investigated. A total of 236 pairs of samplers were collected using an Anderson Dichotomous sampler between December 2004 and October 2005. The average mass concentrations of PM2.5, PM2.5-10, and particulate matter less than 10 microm in aerodynamic diameter (PM10) were found to be 29.38, 23.85, and 53.23 microg/m3, respectively. The concentrations of PM2.5 and PM10 were found to be higher in heating seasons (December to May) than in summer. The increase of relative humidity, cloudiness, and lower temperature was found to be highly related to the increase of particulate matter (PM) episodic events. During non-rainy days, the episodic events for PM2.5 and PM10 were increased by 30 and 10.7%, respectively. This is a result of the extensive use of fuel during winter for heating purposes and also because of stagnant air masses formed because of low temperature and low wind speed over the study area.