Maternal exposure to high levels of dioxins in relation to birth weight in women affected by Yusho disease

Background

Studies on the association of maternal exposure to polychlorinated dibenzo-p-dioxin (PCDDs), polychlorinated dibenzofurans (PCDFs), and polychlorinated biphenyls (PCBs) with decreased birth weight in humans have produced conflicting results. In Japan in 1968, an accidental human exposure to rice oil contaminated with PCDDs, PCDFs, and PCBs, led to the development of Yusho disease.

Objective

The Yusho cohort was used to evaluate the effect of maternal exposure to PCDDs, PCDFs, and PCBs on birth weight.

Methods

Blood samples, obtained from 101 Yusho women (190 births) who gave birth after exposure, were analyzed for congeners of seven PCDDs, ten PCDFs, and four non-ortho PCBs.

Results

Total PCDD TEQ (adjusted beta = − 161.9 g; 95% CI, −265.3 to − 58.6), total PCDF TEQ (adjusted beta = − 105.9 g; 95% CI, −179.5 to − 32.2), and total non-ortho PCBs (adjusted beta = − 178.4 g; 95% CI, −318.3 to − 38.5) levels were inversely associated with birth weight. Significant inverse associations with birth weight were also found for total PCDD TEQ, total PCDF TEQ, and total non-ortho PCB TEQ levels among male, but not female, infants. Significant inverse associations with birth weight were also found for nine congeners among all infants; the adjusted beta coefficients were largest for 1,2,3,6,7,8-HxCDD and smallest for 2,3,4,7,8-PeCDF.

Conclusion

In the setting of exposure to high levels of dioxins, maternal blood levels of PCDDs, PCDFs and PCBs are associated with lower birth weight in Yusho patients. The association exhibited gender-specific differences, as male infants are more susceptible than females to growth restriction induced by in utero dioxin exposures.     

Dry and wet deposition of water-insoluble dust and water-soluble chemical species during spring 2007 in Tsukuba,Japan

Dry and wet depositions were sampled daily in Tsukuba, Japan, in spring 2007. Temporal variations in the dry and wet deposition fluxes of dust and water-soluble chemical species were controlled largely by air mass origin, the water vapor mixing ratio, and Asian dust events. The contribution of local sources to dry deposition of dust was large when the wind speed was high. Dry deposition fluxes of water-soluble chemical species were larger in humid air masses than in dry air masses. Wet deposition fluxes of dust and water-soluble chemical species indicated that air masses that passed over dust source regions and industrial regions became mixed with the maritime air masses over the coastal site of the Asian continent and western part of the Japanese islands. The total deposition of dust was 4220 mg m^?2 month^?1, and that of water-soluble chemical species ranged from 10 to 636 mg m^?2 month^?1. Wet deposition fluxes of the total deposition flux of dust accounted for 72% and those of water-soluble chemical species was for 72–96%. In particular, the largest wet deposition occurred during a single Asian dust event on 3 April. This event accounted for 23% (950 mg m^?2 month^?1) of the monthly dust deposition flux and for 2–28% (0.43–51 mg m^?2 month^?1) of the monthly deposition flux of water-soluble chemical species. This result implies that the wet deposition flux associated with even one sporadic Asian dust event can have extensive impacts on both terrestrial and oceanic ecosystems in East Asia.     

Blood levels of PCDDs,PCDFs, and coplanar PCBs in Yusho mothers and their descendants: Association with fetal Yusho disease

Maternal exposure to polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), and polychlorinated biphenyls (PCBs) may result in adverse health effects in their children. In Japan in 1968, an accidental human exposure to rice oil contaminated with PCDDs, PCDFs, and PCBs, led to the development of Yusho disease. Yusho mothers delivered descendants with low birth weights and hyperpigmented skin and mucosa, which are characteristic of fetal Yusho disease (FYD). The Yusho cohort was used to evaluate the effect of maternal exposure to PCDDs, PCDFs, and PCBs on the development of FYD. Blood samples, obtained from 64 Yusho mothers (117 descendants: 10 with FYD and 107 without FYD), were analyzed for congeners of seven PCDDs, 10 PCDFs, and four coplanar PCBs. We investigated the association between the maternal estimated blood levels of dioxins at delivery and the risk of fetal Yusho disease. We also studied the differences in dioxin blood levels in 24 mother–descendant pairs (5 with FYD and 19 without FYD). The estimated levels of total PCDD TEQ, total PCDF TEQ, total coplanar PCB TEQ, and total TEQ in the maternal blood at delivery were associated with significantly increased risk of FYD. The odds ratios, which present the risk of FYD for a 10-fold increase in blood dioxin, were largest for 1,2,3,6,7,8-HexaCDD (odds ratio = 28.6, 95% confidence interval = 1.67–489.9, p = 0.02). The levels of 1,2,3,6,7,8-HexaCDD in both the Yusho mothers and their descendants with FYD were higher than the levels in those without FYD. These findings suggest that 1,2,3,6,7,8-HexaCDD is the most important causative congener for the development of FYD.     

Effects of an invasive ant on land snails in the Ogasawara Islands

We investigated how Pheidole megacephala has affected endemic achatinellid snails because these snails are excellent indicators of the impact of ants and they have high conservation value in Ogasawara. In 2015 we surveyed the Minamizaki area of Hahajima Island of Ogasawara, designated a core zone of the World Heritage Site, for P. megacephala. In Minamizaki, we determined the distribution and density of achatinellid snails in 2015 and compared these data with their distribution and density in 2005. Land cover in the survey area was entirely forest. We also tested whether P. megacephala preyed on achatinellid snails in the laboratory. P. megacephala was present in the forested areas of Minamizaki. Achatinellid snails were absent in 19 of 39 sites where P. megacephala was present, whereas in other areas densities of the snails ranged from 2 to 228 individuals/site. In the laboratory, P. megacephala carried 6 of 7 achatinellid snails and a broken shell was found. Snail distribution and density comparisons and results of the feeding experiments suggest that the presence of P. megacephala has contributed to the decline of achatinellid snails in forests in the survey area. Yet, P. megacephala is not on the official list of invasive non‐native species. Stakeholders using the list of invasive species to develop conservation programs should recognize that invasiveness of non‐native species differs depending on the ecosystem and that official lists may not be complete.     

Investigation on chemical species of arsenic, selenium and antimony in fly ash from coal fuel thermal power stations

Investigations of the existing chemical forms and the concentrations of arsenic (As), selenium (Se) and antimony (Sb) in samples of fly ash obtained from six coal-fired power stations in various countries were carried out. The concentration of As was found to vary from 5.4 to 22.3 mg kg(-1), and the most common mode of occurrence of As in the fly ashes is in association with carbonates or Fe-Mn oxides. The concentrations of Se and Sb ranged from 2.3-5.2 and 1.0-3.9 mg kg(-1), respectively. The dominant chemical forms of Se and Sb in the fly ashes were as extractable species. Also, water-soluble As, Se and Sb in the fly ashes were extracted, and the chemical species of As, Se and Sb in the extract determined using HPLC-ICP-MS. This was done as the potential release of soluble As, Se and Sb through leaching of fly ash is of environmental concern. The most abundant form of As in the extract was the low toxicity As(V). The main species of Se was Se(IV), although it was found that the ratio of Se(VI) to Se(IV) in acidic fly ashes is higher than in alkaline fly ash samples. Antimony was mostly present as Sb(III).     

High-resolution simulation of volcanic sulfur dioxide dispersion over the Miyake Island

After severe eruptions of the volcano at Miyake Island in August 2000, a large amount of volcanic gas was released into the atmosphere. To simulate flows and dispersion of sulfur dioxide (SO₂) over Miyake Island, a set of numerical models was developed. The multi-nesting method was adopted to reflect a realistic meteorological field and to sufficiently resolve the flow over the island with a diameter of 8 km. The outermost model was the Regional Spectral Model (RSM) of the Japan Meteorological Agency (JMA) with a horizontal grid size of 10 km. Finer atmospheric structure was simulated with the nonhydrostatic model jointly developed by the Meteorological Research Institute and the Numerical Prediction Division of JMA (MRI/NPD-NHM) with grid intervals of 2 km, 400 m and 100 m. Realistic topography of the island was represented in the innermost model. The Lagrangian particle method was applied to the dispersion model, which is driven by the meteorological field of the 100 m grid MRI/NPD-NHM. The random walk procedure was used to represent the turbulent diffusion. The model was verified in four cases. Simulated SO₂ concentrations agreed well with observed concentrations at a monitoring station including temporal variation. Under a large synoptic change, however, accurate prediction became difficult. Further numerical experiments have been done to investigate characteristics of the flow and the distribution of SO₂. Steady inflows, classified according to the surface wind speed and direction, were assumed. Simulated SO₂ distribution on the ground apparently depends on the surface wind. Under relatively weak inflow, there is a large diurnal change in SO₂ distribution, affected by the thermally induced flow. SO₂ gas is widely spread downstream in the nighttime but hardly reaches the coastal area in the daytime. On the other hand, SO₂ gas steadily reached the downstream coast with little diurnal variation under the stronger inflow. Ground temperature, as well as the static stability of the inflow, also influences downstream wind, turbulent diffusivity and SO₂ distribution.     

Species richness patterns along environmental gradients in island land molluscan fauna

The relationship between species richness and environmental variables may change depending on habitat structure, dispersal ability, species mixing, and community adaptation to the environment. It is crucial to know how these factors regulate the environment-diversity relationship. The land molluscan fauna of the Ogasawara Islands in the West Pacific is an excellent model system to address this question because of the high species endemicity (> 90%), small area, and simple habitat structure of the islands. I examined relationships among indigenous species composition, richness, and habitat condition, and especially productivity and forest moisture on the island of Anijima. Two major communities of snails could be distinguished by detrended correspondence analysis (DCA): one group dominated in a moist habitat with high productivity, and the other group dominated in a dry habitat with low productivity. However, species richness became highest at the intermediate condition between the habitats in which the two snail communities were dominant, so that species richness showed a hump-shaped relationship with moisture and productivity. In contrast, the species richness of the snail community in the moist habitat showed a monotonically positive correlation, and that in the dry habitat showed a monotonically negative correlation with moisture and productivity. Thus, the greater species richness in intermediate moisture and productivity resulted from the ecotone effect or community overlap at the transitional areas, where faunas with different ecologies can meet in a single site. These findings suggest that hump-shaped productivity-diversity relationships in land Mollusca would reflect the ecotone effect as a result of the mixing of species adapted to either fertile habitats or sterile habitats.     

Enrichment of elements in industrial waste incineration bottom ashes obtained from three different types of incinerators,as studied by ICP-AES and ICP-MS

The elemental composition of the industrial waste incineration bottom ash (IWIBA) samples collected from three different types of incinerator with different kinds of wastes were compared. The major-to-ultratrace elements in the IWIBA samples were determined by inductively coupled plasma atomic emission spectrometry (ICP-AES) and inductively coupled plasma mass spectrometry (ICP-MS). As a result, ca. 40 elements in the concentration range from milligrams per gram to submicrograms per gram could be determined with relative standard deviations of less than 5%. The IWIBA sample from petrochemical wastes contained lower concentrations of the elements, because fewer mineral constituents were contained in the input waste materials. On the contrary, the elemental concentrations in the IWIBA sample from industrial solid wastes provided the highest values for most elements, while the elemental compositions of the IWIBA sample from food wastes were similar to those of municipal solid waste incineration bottom ash. In addition, it was found from the analytical results that the levels of various heavy metals such as Cr, Mn, Fe, Ni, Cu, As, Zr, Mo, Sb, Ba, and Pb were higher in the IWIBA samples than in municipal solid waste incineration bottom ash. The enrichment factors of the elements in the IWIBA samples were estimated from the analytical results to compare the elemental distributions in incineration bottom ashes in relation to their mining influence factors, which are the indices for human use of the elements.