Effect of carbon particles on heavy metal emissions under ash-melting conditions

In Japan, incineration ash is subjected to a melting process to reduce waste volume and to stabilize hazardous heavy metals. In previous articles, we reported that large quantities of volatile metals are emitted under ash-melting conditions at temperatures higher than 1200°C and that such emissions are considerably increased under reducing conditions. However, the emission behavior in the presence of large amounts of char particles was unclear, and we suspected that emissions under these conditions might differ from emissions under the previous conditions. Therefore, we investigated heavy metal emissions and the melting characteristics of ash in the presence of carbon particles. In this experiment, a small crucible with ash and carbon was rapidly heated using a high-frequency induction-heating furnace to simulate the melting ash gasification with carbon. As a result, it was found that additive carbon can promote emissions of heavy metals such as zinc and lead and control the melt of the ash.     

Comparison of different packing materials for the biofiltration of air toxics

Four different biofilter packing materials (two porous ceramics, perlite, and open pore polyurethane foam) were compared for the removal of toluene vapors. The focus was on evaluating performance at relatively short gas retention time (13.5 and 27 sec). The reactors were initially operated as biotrickling filters with continuous feeding and trickling of a nutrient solution. After significant plugging of the biotrickling filter beds with biomass was observed, the operation mode was switched to biofiltration with only periodic supply of mineral nutrients. This resulted in stable conditions, which allowed detailed investigations over > 6 months. The reactor packed with cattle bone Porcelite (CBP), a ceramic material containing some macronutrients and micronutrients, exhibited the highest performance. The critical load (i.e., load at which 95% removal occurred) was 29 g m(-3) hr(-1) at a gas retention time of 13.5 sec and 66 g m(-3) hr(-1) at a gas retention time of 27 sec. After the long-term experiment, the packing materials were taken from the reactors and examined. The reactors were divided into three sections, top, middle, and bottom, to determine whether spatial differentiation of biomass occurred. The assays included a double-staining technique to count total and live microorganisms and determination of moisture, protein, and dry weight contents. Microbial community analysis was also conducted by denaturing gradient gel electrophoresis. The results showed that most reactors had a significant fraction of inactive biomass. Comparatively, the CBP biofilter held significantly higher densities of active biomass, which may be the reason for the higher toluene removal performance. The analyses suggest that favorable material properties and the nutrients slowly released by the CBP provided better environmental conditions for the process culture.     

Bimodal vertical distribution and diel migration of the copepods Metridia pacifica,M. okhotensis and Pleuromamma scutullata in the western North Pacific Ocean

Diel changes in fine-scale vertical distributions of three calanoid copepods Metridia pacifica, M. okhotensis and Pleuromamma scutullata in the subarctic waters of the western North Pacific were examined. Sampling was carried out in June and August 1983, at two stations in Oyashio water using a Longhurst-Hardy Plankton Recorder (LHPR). Sampling, down to about 1 000 m, was repeated four to five times at intervals of several hours. Vertical resolution was 5 to 40 m. Copepods were concentrated in two strata, the surface (0 to 60 m) and the mesopelagic (200 to 300 m) layers, throughout the day at both stations. Younger M. pacifica (C III and C IV) were dominant in both strata. Although most female C V and adult females demonstrated diel vertical migration at 20 to 30 m h^-1, a significant number of females did not migrate upward but remained in the deep stratum at night. The same trend was evident in M. ohkotensis and P. scutullata. Foregut content observations indicated that feeding activities of the deep mode populations were as high as those of the surface mode, though food of deep individuals was different. Such a bimodal distribution may increase intraspecific diversity of copepod populations and is possibly why metridiid copepods dominate during late summer to winter in the relatively simple ecosystems of high latitudes.     

Ammonium regeneration and assimilation in eelgrass (Zostera marina) beds

Regeneration and assimilation of ammonium in the water column and in sediments of eelgrass (Zostera marina L.) beds of Izembek Lagoon and Crane Cove, Alaska, USA and Mangoku-Ura, northeastern Japan, were investigated by using a ¹⁵N isotope dilution technique. In the water column of Mangoku-Ura, ammonium was regenerated at a rate of 12 nmol l^-1 h^-1 and assimilated at a rate of 74 nmol l^-1 h^-1. The ammonium regeneration rate in sediments ranged from 2 to 150 nmol g^-1 h^-1, and with one exception, exceeded ammonium assimilation in sediments (0.3 to 77 nmol g^-1 h^-1). The ammonium regeneration in the water column was of little significance for the nitrogen supply to the eelgrass bed ecosystem. Net ammonium production (regeneration minus assimilation) in the sediment of Izembek Laggon met nitrogen demand for eelgrass growth, suggesting that ammonium regeneration in the sediments was very important for the nitrogen cycle in the eelgrass bed ecosystem.     

Aerobic nitrogen fixation by the marine non-heterocystous cyanobacterium Trichodesmium (Oscillatoria) spp.: Its protective mechanism against oxygen

Nitrogen fixation (acetylene reduction) by the marine non-heterocystous cyanobacteria, Trichodesmium thiebautii and T. erythraeum, is sensitive to oxygen. Its sensitivity to oxygen was intensified when the colonies of T. thiebautii were disintegrated, but the separate trichomes yielded still retained the capacity for light dependent acetylene reduction. Trichodesmium colonies evolved hydrogen under argon in the light. The addition of carbon monoxide with DCMU [3-(3,4-dichlorophenyl)-1,1-dimethylurea] enhanced the rate of hydrogen evolution to approximately the same level as that of the maximum acetylene reduction on an electron basis. This probably results from the inhibition of the uptake hydrogenase. We propose that the uptake hydrogenase functions to protect nitrogenase from damage by oxygen.     

Cervical vertebral motions and biomechanical responses to direct loading of human head

There is little known data characterizing the biomechanical responses of the human head and neck under direct head loading conditions. However, the evaluation of the appropriateness of current crash test dummy head-neck systems is easily accomplished. Such an effort, using experimental means, generates and provides characterizations of human head-neck response to several direct head loading conditions. Low-level impact loads were applied to the head and face of volunteers and dummies. The resultant forces and moments at the occipital condyle were calculated. For the volunteers, activation of the neck musculature was determined using electromyography (EMG). In addition, cervical vertebral motions of the volunteers have been taken by means of X-ray cineradiography. The Ethics Committee of Tsukuba University approved the protocol of the experiments in advance. External force of about 210 N was applied to the head and face of five volunteers with an average age of 25 for the duration of 100 msec or so, via a strap at one of four locations in various directions: (1) an upward load applied to the chin, (2) a rearward load applied to the chin without facial mask, (3) a rearward load applied to the chin with the facial mask, and (4) a rearward load applied to the forehead. The same impact force as those for the human volunteers was also applied to HY-III, THOR, and BioRID. We found that cervical vertebral motions differ markedly according to the difference in impact loading condition. Some particular characteristics are also found, such as the flexion or extension of the upper cervical vertebrae (C0, C1, and C2) or middle cervical vertebrae (C3-C4), showing that the modes of cervical vertebral motions are markedly different among the different loading conditions. We also found that the biofidelity of dummies to neck response characteristics of the volunteers at the low-level impact loads is in the order of BioRID, THOR, and HY-III. It is relevant in this regard that the BioRID dummy was designed for a low-severity impact environment, whereas THOR and HY-III were optimized for higher-severity impacts.     

La chimie du plomb et du brome particulaire en atmosphere urbaine: II — Effets locaux

In an abnormal urban atmospheric situation, where we have detected an exceptional increasing of lead concentration which could have no relation to traffic modification, we have been able to detect others sources, that has been possible thanks to simultaneous studies of granulometric distribution and concentrations of lead and bromine in this particular atmosphere.