Electrochemical oxidation of bisphenol A. Application to the removal of bisphenol A using a carbon fiber electrode

Leachate samples with a high strength of ammonium-nitrogen (NH4+-N) were collected from a local landfill site in Hong Kong. Two experiments were carried out to study (1) the inhibition of microbial activity of activated sludge by NH4+-N and (2) the chemical precipitation of NH4+-N from leachate as a preliminary treatment prior to the activated sludge process. The experimental results demonstrated that the efficiency of COD removal decreased from 97.7% to 78.1%, and the dehydrogenase activity of activated sludge decreased from 9.29 to 4.93 microg TF/mg MLSS, respectively, when the NH4+-N concentration increased from 53 to 800 mg/l. The experiment also demonstrated that the NH4+-N in the leachate can be quickly precipitated as MgNH4PO4 x 6H2O after addition of MgCl2 x 6H2O + Na2HPO4 x 12H2O. The NH4+-N concentration was reduced from 5618 to 112 mg/l within 15 min when a molar ratio of Mg2+:NH+:PO4(3-) = 1:1:1 was used. The optimum pH to reach the minimum solubility of MgNH4PO4 x 6H2O was found to be in the range of 8.5-9.0. Attention should be given to the high salinity formed in the treated leachate by using MgCl2 x 6H2O + Na2HPO4 x 12H2O, which may affect microbial activity in the following biological treatment processes. Using two other combinations of chemicals [MgO + 85%H3PO4 and Ca(H2PO4)2 x H2O + MgSO4 x 7H2O] could minimise salinity generation after precipitation, while they were less efficient for NH4+-N removal.     

Relevance of coplanar PCBs for TEQ emission of fluidized bed incineration and impact of emission control devices

Five fluidized bed incinerators combusting municipal solid waste were assessed for the impact of coplanar PCBs on total TEQ emission. In 17 stack measurements, the coplanar PCBs contributed on average less than 3% to total TEQ with a maximum contribution of 7.5% to total TEQ in one measurement. Differences in the design of the flue gas cooling section did not show an effect on the impact of coplanar PCBs on total TEQ. The effect of emission control devices on the impact of coplanar PCBs on the total TEQ was studied in more detail at one incinerator. The relative contribution of PCBs to total TEQ increased along the flue gas line. This was caused by a slightly higher removal efficiency for TEQ relevant PCDDs/PCDFs compared to coplanar PCBs by the bag filters and a higher destruction efficiency for PCDDs/PCDFs compared to PCBs by the SCR catalyst. Additionally, the removal efficiencies of the emission control devices (bag filters and catalyst) for other chlorinated aromatic compounds which have been proposed as TEQ indicator compounds (polychlorinated benzenes and polychlorinated phenols) were compared with those for PCDDs/PCDFs and coplanar PCBs. Removal efficiencies for polychlorinated benzenes or polychlorinated phenols considerably differed from those of PCDD/PCDF and coplanar PCBs. Implications for TEQ assessments using indicator compounds as proposed in the literature are discussed.     

Advantages and risks of using steel slag in preparing composts from raw organic waste

It had been reported that iron and manganese oxides in steel slag enhanced the production of humic acid (HA) from low-molecular-weight compounds, such as phenolic acids, amino acids, and saccharides. In the present study, this function of steel slag was applied to the composting of raw organic wastes (ROWs). The degree of humification of HAs is an important factor in evaluating compost quality. Thus, HAs were extracted from the prepared composts and the humification parameters were determined, in terms of elemental compositions, acidic functional group contents, molecular weights, spectroscopic parameters from UV–vis absorption and ¹³C NMR spectra. The timing for adding steel slag affected the degree of humification of HAs in the composts. The weight average molecular weight of a HA when slag was added initially (29 kDa) was significantly higher than when slag was added after elevating the temperature of the compost pile (17–18 kDa). These results show that ROWs are decomposed to low-molecular-weight compounds after the pile temperature is elevated and the presence of slag enhances the polycondensation of these compounds to produce HAs with a higher degree of humification. Because the slag used in the present study contained several-tens ng g^?1 to several μg g^?1 of toxic elements (B, Cu, Cr, and Zn), leaching tests for these elements from the prepared composts were carried out. Levels for leaching boron from composts prepared by adding slag (0.2–0.4 mg L^?1) were obviously higher than the corresponding levels without slag (0.05 mg L^?1).     

Determination of tissue-blood partition coefficients for a physiological model for humans, and estimation of dioxin concentration in tissues

The tissue-blood partition coefficients for a physiologically based pharmacokinetic (PBPK) model were determined, and the concentrations of 17 congeners of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) in tissues in Japanese people were estimated using the model. According to the PBPK model established by Lawrence and Gobas [Chemosphere 35 (1997) 427-452], we assumed a steady-state fugacity model for Japanese people in general, and set the route of PCDD/Fs exposure only from food intake. The required partition coefficients for liver, kidney, adipose, muscle, skin, bile, gut and viscera (richly perfused tissue) were calculated using available autopsy data from eight Japanese men and women who were not accidentally exposed to PCDD/Fs. For validation of the partition coefficients, estimated PCDD/F concentrations in liver, kidney, fat, blood and muscle using the model were compared to other two sets of measured concentration data in Japanese tissues. Good agreement was obtained between estimated data and measured data, and most of the measured data were within the simulated concentration range in liver, kidney, blood and muscle. From these results, our model and calculated partition coefficients seem applicable for the estimation of congener-specific concentrations in human tissues.     

Setting the most robust effluent level under severe uncertainty: Application of information-gap decision theory to chemical management

Decisions in ecological risk management for chemical substances must be made based on incomplete information due to uncertainties. To protect the ecosystems from the adverse effect of chemicals, a precautionary approach is often taken. The precautionary approach, which is based on conservative assumptions about the risks of chemical substances, can be applied selecting management models and data. This approach can lead to an adequate margin of safety for ecosystems by reducing exposure to harmful substances, either by reducing the use of target chemicals or putting in place strict water quality criteria. However, the reduction of chemical use or effluent concentrations typically entails a financial burden. The cost effectiveness of the precautionary approach may be small. Hence, we need to develop a formulaic methodology in chemical risk management that can sufficiently protect ecosystems in a cost-effective way, even when we do not have sufficient information for chemical management. Information-gap decision theory can provide the formulaic methodology. Information-gap decision theory determines which action is the most robust to uncertainty by guaranteeing an acceptable outcome under the largest degree of uncertainty without requiring information about the extent of parameter uncertainty at the outset. In this paper, we illustrate the application of information-gap decision theory to derive a framework for setting effluent limits of pollutants for point sources under uncertainty. Our application incorporates a cost for reduction in pollutant emission and a cost to wildlife species affected by the pollutant. Our framework enables us to settle upon actions to deal with severe uncertainty in ecological risk management of chemicals.     

Identification of the dimethylbenzyl mercapturic acid in urine of rats treated with 1,2,3-trimethylbenzene.

The structure was investigated of the mercapturic acid excreted in urine of rats after the i.p. administration of 1,2,3-trimethylbenzene. Of the two regioisomeric mercapturic acids, i.e. N-acetyl-S-(2,3-dimethylbenzyl)-L-cysteine and N-acetyl-S-(2,6-dimethyl-benzyl)-L-cysteine, only the former was isolated by preparative HPLC and identified, by comparison with an authentic specimen. The excretion rate of the mercapturate was estimated to be approximately 5% of dose, not a substantial metabolic route.     

Evaluating the fish safety level of river water and wastewater with a larval medaka assay

A larval medaka (Oryzias latipes) assay was proposed to evaluate the fish safety level of river waters and wastewaters. Organic toxicants were 10-100 times concentrated with adsorption cartridges from 4 l of river water or 1-10 times concentrated from 400 ml of wastewater. Toxicity of these concentrated solutions was determined by exposing 48-72 h post-hatch age larvae for 48 h. The method effectively revealed a variation of the median lethal concentration ratio (LCR50) from 13 to >100 in 125 river water samples, and from <1 to >10 in five typical wastewater samples. Ayase River, which takes water mostly from agricultural or household discharge, showed significantly (P<0.001) lower LCR50 than Sagami River that takes natural water as the source. Safety Levels in both Sagami River and Ayase River were influenced by the irrigation activity, LCR50 at some sites showing a seasonal-specific decrease in winter. Pollution from pulp and paper industries contributed to the low LCR50 in several tributaries of Ayase River. Required little manpower in sampling, pretreatment and testing, the proposed larval medaka assay was proved as an efficient tool for screening those high risk sites for priority management.     

Development and application of kinetic model on biological anoxic/aerobic filter

An up-flow biological anoxic filter (BANF) has been developed to achieve high removal performance of suspended solids and BOD removal as well as nitrogen. With a view to understand treatment mechanisms, we developed a filtration model that incorporates filtration, deposit scoring and biological reactions simultaneously. The biological reactions consist of four types of reaction; dissolution of organic particles; utilization of dissolved organic matter; denitrification; and self-degradation of bacteria. Whereas the reactor is generally assumed to be a plug flow reactor in the filtration model, it is assumed a continuous-flow stirred tank reactor (CSTR) in the model of biological reactions. The hydrodynamics is supposed that the filter bottom (the portion sludge settled) is a CSTR and the filter bed (the portion filled with filter media) consists of number of CSTR of equal size arranged in series. The model obtained in this study was verified and simulated using experimental results taken from a pilot-scale plant and predicted the experimental data well, applying to design and operate BANF.     

Land-use change and its socio-environmental impact in Eastern Ethiopia’s highland

The Alemaya district (Eastern Ethiopian highlands) is characterized by undulating physiographic features with arid, semi-arid, and humid climatic conditions. This study evaluated socio-environmental changes in land use and land cover during 1985–2011. Screen digitization on remotely sensed data (i.e., Landsat images from 1985 to 2011) was performed to produce 10 classes of land use and land cover. Then, final land-use maps were prepared using a geographic information system following field verification and accuracy assessment. The drying of water bodies, including the prominent lakes Alemaya, Adele, and Tinike, had been the most important environmental change observed. Degraded land, marsh, perennial cropland, and residential areas increased by 37, 438, 42, and 190 %, respectively, whereas grassland, plantation, shrubland, and temporal cropland decreased by 64, 11, 63, and 29 %, respectively. The increase in land degradation (+37 %), the other major observed problem, has made large areas unsuitable for agriculture and has reduced crop productivity. These land-use and land-cover changes have affected both the environment and the livelihoods of local residents; especially the issue related to land degradation requires urgent attention.     

Seasonal variability of 1-chloropyrene on atmospheric particles and photostability in toluene

The occurrence of a mutagenic compound, 1-chloropyrene (Cl-Py), in extracts of ambient particulate matter at an urban site in Japan has been investigated. Samples were collected with a high-volume air sampler for 24 h periods over the course of 1 week in winter (February), spring (May), summer (August), and autumn (November) 2002. The Cl-Py levels showed seasonal variation, ranging from 2.4 pg/m(3) (summer) to 18.9 pg/m(3) (winter). This variation would indicate that the lower temperatures in winter results in an increased distribution of Cl-Py from vapor phase to the particle phase. In addition, there is also the possibility that ambient Cl-Py is emitted from seasonal sources or is susceptible to photodegradation by sunlight, or both. The photodegradation of Cl-Py in a laboratory experiment was conducted to simulate the compound's fate on airborne particle surfaces. The degradation of Cl-Py proceeded by a first-order reaction with a rate constant of 0.72 h(-1). In the presence of a radical sensitizer, 9,10-anthraquinone (AQ), the photodegradation rate of Cl-Py was elevated in comparison with the rate in the absence of AQ. In addition, the dechlorination of Cl-Py (i.e., the formation of Py) occurred in the presence of AQ.