Global pollution monitoring of butyltin compounds using skipjack tuna as a bioindicator

Butyltin compounds (BTs) including mono- (MBT), di- (DBT), tri-butyltin (TBT) and total tin (sigmaSn), were determined in the liver of skipjack tuna (Katsuwonus pelamis) collected from Asian offshore waters (off-Japan, the Japan Sea, off-Taiwan, the East China Sea, the South China Sea, off-Philippines, off-Indonesia, the Bay of Bengal), off-Seychelles, off-Brazil and open seas (the North Pacific). BTs were detected in all the skipjack tuna collected, suggesting widespread contamination of BTs even in offshore waters and open seas on a global scale. Considering specific accumulation, Sex-, body length- differences and migration of skipjack tuna did not seem to affect BT concentrations, indicating rapid reflection of the pollution levels in seawater where and when they were collected. Skipjack tuna is a suitable bioindicator for monitoring the global distribution of BTs in offshore waters and open seas. High concentrations of BTs were observed in skipjack tuna from offshore waters around Japan, a highly developed and industrialized region (up to 400 ng/g wet weight). Moreover skipjack tuna collected from offshore waters around Asian developing countries also revealed the levels comparable to those in Japan (up to 270 ng/g wet weight) which may be due to the recent improvement in economic status in Asian developing countries. High percentages (almost 90%) of BTs in total tin (sigmaSn: sum of inorganic tin+organic tin) were found in the liver of skipjack tuna from offshore waters around Asian developing countries. This finding suggests that the anthropogenic BTs represent the major source of Sn accumulation in skipjack tuna from these regions.     

Supercooling ability in the house spider, Achaearanea tepidariorum: effect of field-collected and laboratory-reared prey

The influence of prey animals on the supercooling ability of the house spider, Achaearanea tepidariorum, was studied by feeding spiders with field-collected and laboratory-cultured prey animals. Irrespective of the prey species supplied, spiders given field-collected prey had a higher supercooling point than those given laboratory-cultured counterparts. This means that (1) the field prey animals contained some efficient ice nucleators, whereas the laboratory animals were free from such substances and (2) the ice nucleators must be of external origin. Several lines of evidence also suggest that, under natural conditions, potential prey animals for the house spider are highly contaminated with ice nucleators.     

Influence of velocity field on driftwood accumulation at a bridge with a single pier

Environmental Fluid Mechanics - Transport of driftwood during heavy rainfall events can intensify the flood hazard. Driftwood accumulates at a bridge and backwater rises. Accumulated logs sink...     

Chemical stabilization of medical waste fly ash using chelating agent and phosphates: Heavy metals and ecotoxicity evaluation

Chemical stabilization of heavy metals in medical waste fly ash has been carried out using the following compounds: a chelating agent (Ashnite S803), a commercial acidic phosphoric acid solution (Ashnite R303) as well as basic one (Ashnite R201). In order to predict the leachability of heavy metals, Japanese Leaching Test (JLT-13) procedure was applied to the stabilized fly ash products. An ecotoxicity assessment of the stabilized fly ash products leachate and the unstabilized fly ash leachate was conducted using a battery of bioassays based on lettuce root elongation inhibition, Daphnia magna mortality and Vibrio fischeri photoinhibition. The results showed that the three stabilizing agents were able to significantly decrease (ANOVA, P < 0.05) the concentration of heavy metals in the leachates. Although the leachate from both stabilized and unstabilized fly ash were very toxic to lettuce and daphnids, the incorporation of these stabilizing agents diminished significantly (ANOVA, P < 0.05) the toxicity of the leachates towards the three tested organisms. Pearson correlation analysis was used to analyze the strength of the relationship between chemical elements concentration in the leachate and bioassays results. Most of the heavy metals in the leachate were significantly correlated (ANOVA, P < 0.05) with the toxicity values of the bioassays. However, the correlation was not found between the concentration of dissolved organic carbon (DOC) and the toxicity effect of the leachate to the tested organisms.     

Leaching behaviour of elements and evaluation of pre-treatment methods for municipal solid waste incinerator residues in column leaching tests.

Two new pre-treatment methods (water-washing/carbonation and carbonation/phosphate stabilization) of municipal solid waste (MSW) incinerator residues were evaluated by column leaching tests under aerobic conditions and anaerobic conditions (which were changed to aerobic conditions after 10 months). A mixture of bottom ash and fly ash (5:1 ratio) was pre-treated using each method. Shredded incombustible residues (SIR) were added to each ash preparation in proportions similar to the ratios present in landfills. For comparison, landfill wastes typical of Japan, namely, a mixture of bottom ash, chelating-pre-treated fly ash, and SIR, were also examined. Leachate samples were collected periodically and analysed over a 15-month period. When compared with chelating pretreatment, both water-washing/carbonation and carbonation/ phosphate stabilization reduced the leaching of Pb, Al, and Cu by about one to two orders of magnitude. Moreover, the initial concentrations of Ca and Pb in leachates from column of water-washing/carbonation were 56-57% and 84-96% less than those from the column of carbonation/phosphate stabilization. Therefore, water-washing/carbonation was considered to be a promising approach to obtain early waste stabilization and to reduce the release of heavy metals to near-negligible levels. The leaching behaviour of elements was also discussed.     

Resolving complexities in healthcare waste management: a goal programming approach.

The wide variety of activities at healthcare facilities generates different types of waste. There is always a danger of spreading infection due to mishandling of infectious waste or sharps. Hence, a variety of policies and actions have been taken to improve healthcare waste management systems. A large body of literature is available which suggests methods for tackling different problematic situations but management is confronted with a variety of complex problems, such as the choice of technological options to control infection, legal and budget restrictions and the timely removal of waste, which can, at times, conflict with each other. Hence, a planning model is presented that is based on a trans-shipment goal programming approach wherein the waste flow is optimized for multiple objectives under different priority structures or with different relative importance (weights). The use of the model is demonstrated as a decision-making tool that would help the management to understand the effects of their policies on the system performance. The model is validated for a case application representing a real-life situation. It can be easily seen that, in the case in which the management is biased toward a higher level of safety protection towards infection control, they have to compromise on cost control and to some extent on environmental pollution control.     

北京市大气颗粒物中多环芳烃(PAHs)污染特征

对北京市2003-09～2004-07的10个月空气中的TSP样品进行了连续采样,周期为1次/周.分析了15种3～7环的PAHs,其中以4～5环为主.∑PAHs浓度及BaP的最大值分别达到705 ng/m³和52 ng/m³;春夏秋冬4季∑PAHs的平均浓度分别为46 ng/m³,16 ng/m³,52 ng/m³,268 ng/m³;BaP的4季平均浓度分别为2.8ng/m³,0.23 ng/m³,3.3 ng/m³,16ng/m³;采暖期∑PAHs平均浓度为非采暖期的9.5倍.在所分析的3种气象条件中,降水能够明显降低PAHs的浓度;非采暖期的PAHs浓度随温度的升高而降低,采暖期的浓度与温度没有明显的相关性;采暖期风速水平的增加会导致PAHs浓度的下降,而非采暖期不同环数的PAHs和风速水平的关系各异,3环的PAHs浓度随风速水平增加而增加,4、5环的PAHs浓度变化不大,6、7环PAHs随风速水平的增加而浓度下降.     

Impact of rubble mound groyne structural interventions in restoration of Koggala lagoon,Sri Lanka; numerical modelling approach

Physical processes of the lagoon are influenced by structural interventions. Understanding the complex reality of physical processes sometimes difficult with field observations thus a model provides a simplified abstract view. Two dimensional hydrodynamic model is used to describe, restoration efforts to Koggala lagoon, a combined freshwater and estuarine complex of rich ecosystem on the southern coast of Sri Lanka. The lagoon mouth was naturally closed by a sand bar which controlled the seawater intrusion. Due to large-scale sand removal at lagoon mouth, formation of the sandbar shifted towards the lagoon. After the removal of natural sand barrier, rubble mound groyne structures were built to avoid sand deposition in the lagoon and to protect the highway bridge from the sea wave attack. Construction of the groyne resulted in the lagoon mouth being permanently open which in turn led to many environmental problems with saline intrusion. The aim of this study is to evaluate the current situation of the lagoon and propose alternative structural interventions for minimization of seawater intrusion and subsequently improve lagoon ecosystem. Hydrological parameters were investigated and mathematical models for hydrodynamic behavior of the lagoon were applied in order to describe the lagoon physical processes and flow characteristics. Existing rubble mound structures were redesigned in order to minimize the seawater intrusion. Numerical simulations were carried out for two different mouth widths (40 m and 20 m) with appropriate structural interventions. Existing salting factor for the lagoon is 0.68 and numerical simulation results showed salting factor for 40 m and 20 m openings are 0.61 and 0.54 respectively. This shows the mouth width can be reduced up to 20 m in order to obtain a slating factor close to 0.5, which indicates the predominant influence of fresh water which in turn leads lagoon to a fresh water ecosystem.     

Species-specific and female host-biased ectophoresy in the roundworm Caenorhabditis japonica

Caenorhabditis japonica is a bacteriophagous nematode species that was discovered on the semi-social burrower bug, Parastrachia japonensis, which demonstrates egg-guarding and provisioning behaviors. To understand the life history of C. japonica in relation to P. japonensis, we demonstrated the specificity of this association and fluctuations in nematode number on the insect throughout the year. C. japonica dauer larvae (DL), larvae in a nonfeeding diapause stage, were predominantly found as clumps on the adult female insects but rarely found on the male insects in all populations examined. This female-biased association was consistent throughout the year, but after the nymphs hatched, nematodes were not detected on the mother insects showing provisioning behavior. DL appeared on the nymphs, and the number of DL on the newly emerged female insects gradually increased thereafter. C. japonica has never been detected on other invertebrates collected from the P. japonensis habitat thus far. Our data suggest that the life cycles of C. japonica and P. japonensis are synchronized.     

Simple removal of dioxins by injecting combustion gas into water

A simple, low-cost method for suppression of dioxins/furans (hereinafter referred to as dioxins) is required because many middle- and, especially, small-scale incinerators have fallen into disuse or have been dismantled because of the high running and system costs of measures for the suppression of dioxins. Therefore, the purpose of the present study was to develop a simple removal method for dioxins from combustion gas and to evaluate the basic removal rate of dioxins. The removal method for suspended matter in a gas mixture (cold model) and dioxins in exhaust gases (hot model) has been investigated by means of gas injection into water, the mechanism of which is that the suspended matter in the gas gathers at the gas–liquid interface. In the cold model, the removal ratio of fine particles (R_P) by gas injection into water was reproduced well by the following equation: R_P (%) = 100 × {1−exp(−0.8 · S_S · t_C)}, where S_S (cm²/cm³) is the specific surface area of bubbles and t_C (s) is the residence time of bubbles in water. The removal ratio of fine particles increased as the product S_s · t_C increased. In a hot model using the exhaust gas from combustion experiments of polyvinyl chloride, the removal ratio of dioxins (R_D) by injecting the exhaust gas into water was estimated by the following equation: R_D (%) = 100 × {1−exp(−0.8 · S_S · t_C · C_D0 ^0.07)}, where C_D0 [ng/cm³ (at standard temperature and pressure)] is the dioxins concentration in the exhaust gas before injection into water. R_D depends greatly on the specific surface area of bubbles and the residence time of the bubbles in water, and only weakly on the dioxins concentration in the exhaust gas. Injection of the exhaust gas into water has been shown to be effective and was evaluated as a simple method for the removal of dioxins from exhaust gas.