Adsorption and removal of oxo-anions of arsenic and selenium on the zirconium(IV) loaded polymer resin functionalized with diethylenetriamine-N,N,N',N'-polyacetic acid

A polymer adsorbent in which a Zr(IV)-edta complex analogue is immobilized has been prepared and applied to the removal of oxo-anions of As(III), As(V) and Se(IV). Effective retention of these anions has been demonstrated with the proposed polymer complex system. The adsorption mechanism of oxo-anions onto the Zr(IV)-chelated polymer complex has been investigated using Zr(IV)-edta as the model compound. The formation of mixed complexes with oxo-anions has been exemplified by the isolation of the carbonato complex K2[Zr(CO3)edta].3H2O, the structure of which has been confirmed by X-ray crystallography. NMR study suggests that oxo-anions that form weak or moderate conjugate acids, including those of As(III), As(V) and Se(IV), can form mixed complexes with Zr(IV)-edta using the unsaturated coordination site. However, oxo-anions of strong conjugate acids did not show any appreciable interaction with this complex. According to these observations, retention of oxo-anions on the Zr(IV)-chelated polymer complex has been interpreted by a ligand substitution reaction. The adsorption characteristics of As(III), As(V) and Se(IV) on the Zr(IV)-loaded resin have been examined with respect to the equilibrium adsorption, percentage extraction and the effect of co-existing ions. The adsorption and desorption cycles of the oxo-anions have been demonstrated using a column packed with the proposed resin without any loss of column performance, which indicates the possibility for repeated use.     

Novel malonate-type copolymers containing vinyl alcohol blocks as biodegradable segments and their builder performance in detergent formulations

Poly[(disodium methylene malonate)-co-(vinyl alcohol)] [P(DSMM-VA)] and poly[(disodium ethoxymethylene malonate)-co-(vinyl alcohol)] [P(DSEMM-VA)] containing a poly(vinyl alcohol) (PVA) block as a biodegradable segment were prepared and their biodegradability and functionality were evaluated and compared with those of the corresponding fumarate and maleate copolymers. It was found that the 1,1-dicarboxylate-type copolymers, P(DSMM-VA) and P(DSEMM-VA), showed better biodegradability than the corresponding 1,2-dicarboxylate-type copolymers, P(DSF-VA) and P(DSM-VA). This improved biodegradability of P(DSMM-VA) and P(DSEMM-VA) is probably attributable to their more expanded polymer chain in aqueous solution, which will be more accessible to the degrading enzymes. The minimum chain length of the PVA-block, which acts as a biodegradable segment in the polymer chain, is estimated to be 2–3 and 3–4 monomer units for P(DSMM-VA) and P(DSEMM-VA), respectively. On the other hand, the minimum PVA block is about 5 and 7 monomer units for the fumarate and maleate copolymers, respectively. It was confirmed that P(DSMM-VA) showed excellent builder performance compared to the corresponding fumarate copolymer.Paper presented at the Bio/Environmentally Degradable Polymer Society—Second National Meeting, August 19–21, 1993, Chicago, Illinois.     

Soil characteristics under cash crop farming in upland areas of Sarawak,Malaysia

This study discusses soil fertility under perennial cash crop farming (para rubber, Hevea brasiliensis; black pepper, Piper nigrum; oil palm, Elaeis guineensis) conducted by local farmers and an oil palm estate in an upland area of Sarawak, Malaysia, in comparison with the surrounding secondary forests. In the farmlands of the local farmers, rubber farming was conducted without fertilizer application, while 2–5 t ha^?1 of NPK compounds were applied annually on pepper farms. Soils under rubber farming were acidic with poor nutrient contents, resembling soils in secondary forests. In pepper farms, soils were less acidic and showed high nutrient contents, especially with respect to available P and exchangeable Ca. This trend became stronger with increasing farming duration. Fertilizers applied around pepper vines appeared to migrate and spread across the fields. Bulk density and hardness of surface soils were higher in pepper farms than in secondary forests, indicating soil compaction due to field works. In the oil palm estate, annual fertilizer application rates were moderate at 0.4–0.8 t ha^?1 of NPK compound fertilizers. However, the soil properties in the oil palm estate were similar to those of the small-scale pepper farms. Close to the bases of the palms where fertilizers usually are applied, the contents of exchangeable Ca and available P were high. Nutrient uptake by the dense root systems of the palms seemed to prevent excessive loss of nutrients through leaching. Loss of soil organic matter and deterioration of soil physical properties were brought about by terrace bench construction, but the soils seemed to recover to some extent over time. In conclusion, technologies such as intercropping and the appropriate allocation of different crops to specific locations as well as the proper selection and dosage of fertilizers should be developed and adopted to improve fertilizer efficiency and prevent water pollution due to fertilizer wash-off from farmlands.     

Seasonality,lunar periodicity of settlement and microhabitat association of juvenile humpback red snapper <Emphasis Type="Italic">Lutjanus gibbus</Emphasis> (Lutjanidae) in an Okinawan coral reef

Snappers (Lutjanidae) are one of the important fisheries resources in tropical and subtropical waters. However, there have been few studies clarifying the ecology of newly settled juvenile snappers. The aims of the present study were to clarify the seasonality and lunar periodicity of the larval settlement, and the microhabitat association of newly settled juveniles for Lutjanus gibbus in an Okinawan coral reef. Fifteen coral patches were chosen and underwater visual surveys were conducted during a 2-year period. The larval settlement of the species mainly occurred between May and October during the 2-year survey period. In terms of lunar periodicity of the settlement, the newly settled juveniles were mainly found between the last quarter moon and new moon during the main settlement season. Back calculations of settlement dates based on otolith microstructure showed that most juveniles settled during the last quarter moon and new moon. Stepwise multiple regression analyses revealed that the newly settled juveniles were mainly found on coral patches with a large number of holes on the top of the coral patch and this tendency was mainly consistent during the study period. The volume of holes at the base of coral patches had also a positive effect on the abundance of newly settled juveniles in some cases. The results of the present study suggest that larval settlement has a strong seasonal and lunar periodicity, and newly settled juveniles select coral patches with available refuge spaces.     

Water budget and the consequent duration of canopy carbon gain in a teak plantation in a dry tropical region: Analysis using a soil–plant–air continuum multilayer model

A soil–plant–air continuum multilayer model was used to numerically simulate canopy net assimilation (A_n), evapotranspiration (ET), and soil moisture in a deciduous teak plantation in a dry tropical climate of northern Thailand to examine the influence of soil drought on A_n. The timings of leaf flush and the end of the canopy duration period (CDP) were also investigated from the perspective of the temporal positive carbon gain. Two numerical experiments with different seasonal patterns of leaf area index (LAI) were carried out using above-canopy hydrometeorological data as input data. The first experiment involved seasonally varying LAI estimated based on time-series of radiative transmittance through the canopy, and the second experiment applied an annually constant LAI. The first simulation captured the measured seasonal changes in soil surface moisture; the simulated transpiration agreed with seasonal changes in heat pulse velocity, corresponding to the water use of individual trees, and the simulated A_n became slightly negative. However, in the second simulation, A_n became negative in the dry season because the decline in stomatal conductance due to severe soil drought limited the assimilation, and the simultaneous increase in leaf temperature increased dark respiration. Thus, these experiments revealed that the leaflessness in the dry season is reasonable for carbon gain and emphasized the unfavorable soil water status for carbon gain in the dry season. Examining the duration of positive A_n (DPA) in the second simulation showed that the start of the longest DPA (LDPA) in a year approached the timing of leaf flush in the teak plantation after the spring equinox. On the other hand, the end appeared earlier than that of all CDPs. This result is consistent with the sap flow stopping earlier than the complete leaf fall, implying that the carbon assimilation period ends before the completion of defoliation. The model sensitivity analysis in the second simulation suggests that a smaller LAI and slower maximum rate of carboxylation likely extend the LDPA because soil water from the surface to rooting depth is maintained longer at levels adequate for carbon gain by decreased canopy transpiration. The experiments also suggest that lower soil hydraulic conductivity and deeper rooting depth can postpone the end of the LDPA by increasing soil water retention and the soil water capacity, respectively.     

Population maintenance of the short-lived shrub Sambucus in a deciduous forest

This study quantitatively clarifies the life history of a shrub, Sambucus racemosa ssp. sieboldiana, in an old-growth forest, the Ogawa Forest Reserve, Japan, by a demographic approach using a projection matrix model that incorporates interactions between demographic parameters and canopy height dynamics. S. racemosa is a common deciduous shrub in central Japan and is known to grow predominantly at forest edges or roadsides. This indicates that it is a highly light-demanding species, and occurrence in gaps in old-growth stands suggests its "fugitive," gap-dependent life history in old-growth forests. We found that one distinctive feature of this species was that its seedlings can survive well in shaded conditions by alternating stems every year like perennial herb species. Matrix model analyses demonstrated that S. racemosa can continuously regenerate under the present disturbance regime of this forest and is highly adaptable to the structural dynamics of the old-growth forest. The maturity of S. racemosa shrubs depends on their size, and nearly all (>90%) of the mature (reproducing) individuals were found in gaps or near gaps. But wide seed dispersal by birds and the ability to form both seed banks and seedling banks, the latter of which has been regarded as a common characteristic of shade-tolerant climax species, probably increase the species' chances to encounter canopy gaps. Dynamic-canopied matrix models showed that the greatest elasticity is with shaded seedling survival. The frequent stem alternation of shaded seedlings often makes the growth rate negative, but the survival rate of seedlings in low light awaiting new gap creation is remarkably high (0.93 yr(-1)). The lower survival rate of the larger individuals and smaller minimum size to start reproduction than other canopy or subcanopy shade-tolerant species indicate that S. racemosa has the potential to reproduce before the closure of the encountered gaps and to complete its life history rapidly.     

An overlooked side effect of nest-scattering behavior to decrease predation risk (Acari: Tetranychidae,Stigmaeidae)

The number of nests containing egg masses a female makes over her lifetime and the pattern of scattering nests vary among species in a genus of nest-weaving spider mites (Stigmaeopsis). We hypothesized that the scattered nests of small nest builders have a previously overlooked indirect effect in that the void nests created after predation take on a new role as hindering devices that effectively decrease predator searching efficiency. First, we demonstrated that the experimental design used in this study is a good reflection of the nest distribution pattern of Stigmaeopsis takahashii (an intermediate-sized nest builder) in the field. Using this species as a model, we tested how different nest-scattering patterns affect the predator to examine how scattering may indirectly provide an anti-predation strategy by increasing a predators searching time. Next, we observed how artificially arranged void nests disturb predatory behavior in both starved and fully fed predator females and showed that void nests have a strong hindering effect on predators. Thus, we concluded that the nesting behavior of this mite species not only has anti-predator effects but must also have a stabilizing effect on predator–prey interaction systems at the population level.     

Environmental impact assessment of sprayed-on asbestos in buildings

This study evaluated the environmental impacts of sprayed-on asbestos, which had been used as insulation material in buildings, from multiple perspectives, mainly at the disposal stage. The health risks from asbestos emission and energy consumption were estimated. Two disposal scenarios were assumed for the asbestos: melting for reduced-risk disposal and ordinary packaging/landfilling. We estimated the asbestos emission and health risk in the case of packaging/landfilling, assuming uncontrolled management of the landfill site. A difficulty with introducing health-risk concepts into life cycle assessment (LCA) is the pulse–flux problem, which is discussed in the light of these estimations. In order to solve this problem, we proposed a method using a conversion factor representing exposure-dose/emission, and showed that emission could be converted into health risk. We also estimated the energy consumption for melting asbestos in the disposal stage, which can decrease the health risk. If we consider the energy consumption for the life cycle of asbestos, only a little energy is required for melting, compared with the large amount of energy saved in the use stage owing to the insulating effect of the asbestos. The trade-off relationship between health risk and energy consumption for the disposal scenarios indicated the need for weighting methods to handle trade-offs such as this. Received: July 2, 1998 / Accepted: December 20, 1999     

Application of a gas-solid fluidized bed separator for shredded municipal bulky solid waste separation

A laboratory-scale gas-solid fluidized bed separator able to separate fractions of 5.6-50mm was used for separation of shredded municipal bulky waste (SBW) into combustibles and incombustibles. In batch-scale tests, it was found that accumulation of SBW in the bottom of the bed significantly reduced the separation efficiency. In this study, stirring was shown to be effective in preventing this accumulation. Flexible sheet materials such as paper and film plastics also significantly decreased the separation efficiency. In batch-scale tests, an overall efficiency of 90% was obtained when flexible materials such as film plastics and paper were excluded from the feed SBW. In continuous feeding tests, purities of the float and sink fractions attained 95% and 86% efficiencies, respectively, with an overall efficiency of 79%. The effect of feedstock shape on separation efficiency was also investigated. This study revealed that large particles can be properly separated on the basis of density, while the shape of the material significantly influenced behavior in the fluidizing bed.     

Flow analysis of metals in a municipal solid waste management system

This study aimed to identify the metal flow in a municipal solid waste (MSW) management system. Outputs of a resource recovery facility, refuse derived fuel (RDF) production facility, carbonization facility, plastics liquefaction facility, composting facility, and bio-gasification facility were analyzed for metal content and leaching concentration. In terms of metal content, bulky and incombustible waste had the highest values. Char from a carbonization facility, which treats household waste, had a higher metal content than MSW incinerator bottom ash. A leaching test revealed that Cd and Pb in char and Pb in RDF production residue exceeded the Japanese regulatory criteria for landfilling, so special attention should be paid to final disposal of these substances. By multiplying metal content and the generation rate of outputs, the metal content of input waste to each facility was estimated. For most metals except Cr, the total contribution ratio of paper/textile/plastics, bulky waste, and incombustible waste was over 80%. Approximately 30% of Cr originated from plastic packaging. Finally, several MSW management scenarios showed that most metals are transferred to landfills and the leaching potential of metals to the environment is quite small.