Identification of heavy metal origins related to chemical and morphological soil properties using several non-destructive X-ray analytical methods

Soils are complex mixtures of organic, inorganic materials, and metal compounds from anthropogenic sources. In order to identify the pollution sources, their magnitude and development, several X-ray analytical methods were applied in this study. The concentrations of 16 elements were determined in all the soil samples using energy dispersive X-ray fluorescence spectrometry. Soils of unknown origin were observed by scanning electron microscopy equipped with a Si(Li) X-ray detector using Monte Carlo simulation approach. The mineralogical analyses were carried out using X-ray diffraction spectrometry. Due to the correlations between heavy metals and oxide compounds, the samples were analyzed also by electron probe microanalyzer (EPMA) in order to have information about their oxide contents. On the other hand, soil pH and salinity levels were identified owing to their influence between heavy metal and soil-surface chemistry. Moreover, the geoaccumulation index (I _geo) enables the assessment of contamination by comparing current and pre-industrial concentrations.     

Trace metal levels and some chemical parameters in herby cheese collected from south eastern Anatolia-Turkey

Due to the consumption of the herby cheese in south eastern Anatolia-Turkey is at high ratio, chemical parameters such as dry matter, pH, acidity, aCl, protein, fat and trace metal contents in 50 different herby cheeses produced at this region have been determined in the presented study. The content of lead, copper, cobalt, nickel, chromium, cadmium, and iron have been analyzed by flame atomic absorption spectrometer in air/acetylene flame after combination ash digestion method and wet digestion method. The mean concentration of lead, copper, cobalt, nickel, chromium and cadmium in our samples are higher than literature values except iron.     

Biosorption of Cr(VI) by free and immobilized Pediastrum boryanum biomass: equilibrium, kinetic, and thermodynamic studies

Background and purpose

The biosorption of Cr(VI) from aqueous solution has been studied using free and immobilized Pediastrum boryanum cells in a batch system. The algal cells were immobilized in alginate and alginate?Cgelatin beads via entrapment, and their algal cell free counterparts were used as control systems during biosorption studies of Cr(VI).

Methods

The changes in the functional groups of the biosorbents formulations were confirmed by Fourier transform infrared spectra. The effect of pH, equilibrium time, initial concentration of metal ions, and temperature on the biosorption of Cr(VI) ion was investigated.

Results

The maximum Cr(VI) biosorption capacities were found to be 17.3, 6.73, 14.0, 23.8, and 29.6?mg/g for the free algal cells, and alginate, alginate?Cgelatin, alginate?Ccells, and alginate?Cgelatin?Ccells at pH?2.0, which are corresponding to an initial Cr(VI) concentration of 400?mg/L. The biosorption of Cr(VI) on all the tested biosorbents (P. boryanum cells, alginate, alginate?Cgelatin, and alginate?Ccells, alginate?Cgelatin?Ccells) followed Langmuir adsorption isotherm model.

Conclusion

The thermodynamic studies indicated that the biosorption process was spontaneous and endothermic in nature under studied conditions. For all the tested biosorbents, biosorption kinetic was best described by the pseudo-second-order model.     

Crystalline phase analysis and phosphorus availability after thermochemical treatment of sewage sludge ash with sodium and potassium sulfates for fertilizer production

Phosphorus rich sewage sludge ash is a promising source to produce phosphorus recycling fertilizer. However, the low plant availability of phosphorus in these ashes makes a treatment necessary. A thermochemical treatment (800–1000 °C) with alkali additives transforms poorly plant available phosphorus phases to highly plant available calcium alkali phosphates (Ca,Mg)(Na,K)PO₄. In this study, we investigate the use of K₂SO₄ as additive to produce a phosphorus potassium fertilizer in laboratory-scale experiments (crucible). Pure K₂SO₄ is not suitable as high reaction temperatures are required due to the high melting point of K₂SO₄. To overcome this barrier, we carried out series of experiments with mixtures of K₂SO₄ and Na₂SO₄ resulting in a lower economically feasible reaction temperature (900–1000 °C). In this way, the produced phosphorus potassium fertilizers (8.4 wt.% K, 7.6 wt.% P) was highly plant available for phosphorus indicated by complete extractable phosphorus in neutral ammonium citrate solution. The added potassium is, in contrast to sodium, preferably incorporated into silicates instead of phosphorus phases. Thus, the highly extractable phase (Ca,Mg)(Na,K)PO₄ in the thermochemical products contain less potassium than expected. This preferred incorporation is confirmed by a pilot-scale trial (rotary kiln) and thermodynamic calculation.

     

Do transport taxes reduce air pollution in the top 10 countries with the highest transport tax revenues? A country-specific panel data analysis

Environmental Science and Pollution Research - Recently, policymakers have been developing some policies to improve environmental quality. Environmental taxes are the most important of these...     

A new view of dispersion in well-mixed estuaries

A two-dimensional simulation of Delaware estuary hydrodynamics has been constructed. This simulation has been achieved through a rational estimate of the character of natural turbulence. Non-homogeneous velocities, on the cross-section, are employed in two-dimensional, laterally homogeneous species mass balances. In turn, concentration profiles are interpreted in the form of classical, one-dimensional dispersion coefficients. Variation of dispersion as a function of both freshwater inflow and longitudinal distance was generated. Variation of dispersion in time within a tidal cycle was found to be insignificant while no significant variation from one tidal cycle to the next has been detected.The modeling process involves the solution of tractable equations by implicit numerical methods and is capable of being excited by a wide range of input conditions.A study of the sensitivity of dispersion due to vertical mass diffusion revealed that longitudinal mixing characteristics are inversely proportional to vertical eddy diffusivity and analysis of the numerical results showed the dispersion coefficient is essentially insensitive to variation of longitudinal mass diffusivity. This leads to the conclusion that turbulent diffusivity of mass in the longitudinal direction may be taken as constant for most purposes in the study of a two-dimensional species mass balance model.A field program was carried out near the Delaware Memorial Bridge to collect velocity profiles. Substantial portions of the scheme have been verified (i.e. one- and two-dimensional tidal dynamic models) through the use of these data.     

Investigation of the response of bread wheat cultivars to salinity by using callus cultures

In this research, the response of four bread wheat cultivars (Bal-Atilla, Marmara-86, Seyhan-95, and Panda) to different NaCl concentrations (25.6, 51.3, 77.0, 99.4,119.7 mM) were investigated by using callus cultures. In the experiment, callus induction rates (%) and callus weights in solid and liquid MS media, callus weights in liquid MS media with different NaCl concentrations and in liquid MS media free NaCl concentrations, and callus weights and regeneration rates in MS solid media with NaCl concentrations were studied. Callus induction rates and weights were significantly different among genotypes. Callus weights in liquid MS media were higher than those obtained in the MS solid media. Panda cv. had the highest callus weight in the liquid MS media. Callus weights significantly decreased due to increased NaCl stress. Residual effect of NaCl concentrations on Calli weights was significant. Callus weights decreased due to increasing residue effects of NaCl concentrations. There was no cultivar resistance to salinity, high salinity and very high salinity concentrations. However, Panda cv. was more tolerant cultivar at the light salinity concentrations. Gametoclonal regeneration could not be obtained.     

Removal of boron by electrocoagulation

Boron compounds are used in many manufacturing products and may be introduced into the environment in the form of hazardous materials. Here the feasibility of removal of boron from aqueous solutions by electrocoagulation was investigated. The process was examined under various factors in order to assess optimal operating conditions. The results showed that electrocoagulation for boron removal depends on current density, initial concentration and time. Under a current density of 30 mA/cm² the percentage of boron removal from aqueous solutions is in the range of 92–96%.     

Effect of barn ventilation on blood gas status and some physiological traits of dairy cows

Twenty Holstein friesian and Brown swiss cows were used to investigate the effect of insufficient in barn ventilation on blood gas status and some physiological traits of the cows. Animals were kept in mechanically ventilated barn in stall barn (I); and the ventilation funnels of the barn were closed to simulate traditional habits of the region's breeders (II); then cows were transfered open-shed barn (III). For each experimental of 10 days period, respiration and pulse rates and blood gas of animals were measured. Temperature, relative humidity, CO2 and NH3 concentrations were recorded in each barns. In mechanically ventilated barn, climatic and atmospheric gas was in normal ranges for the cows but in unventilated barn they were at the upper levels. In experiment II, blood pH was decreased without pCO2 change. The highest blood pO2 and HCO3(-) levels were found when the animals were kept in open-shed barn (III). Measured parameters were not influenced by breed of the cows. Blood pH, pO2 HCO3(-), respiration and pulse rates of the cows were significantly affected by barn types (p < 0.05 and p < 0.01). Respiration and pulse rates were higher in inadequate (II) barn conditions than those of open-shed. Higher levels of gases, especially carbon dioxide, in the unventilated barn significantly influenced biological parameters of cows. It is concluded that poor ventilation caused considerable changes in physiologic parameters of the cows and can potentially affect animal health and production.     

Diurnal photosynthesis, water use efficiency and light use efficiency of wheat under Mediterranean field conditions

Photosynthesis and transpiration rates of wheat leaves (Triticum aestivum L.) were measured at 30 min intervals under Mediterranean field conditions, using Photosynthesis Monitor system (PM-48M). The dynamics of net photosynthetic rate (P(N)), transpiration rate (E(T)), water use efficiency (WUE), light use efficiency (LUE), stomatal conductance (g(s)), photosynthetically active radiation (PAR), air temperature (T), relative humidity (RH), and atmospheric CO2 concentration (Catm) were quantified at five rainfed wheat sites with the same stages of development (midflowering) along south-to-north and east-to-west transects for eight days in April. Diurnal P(N) (3.6 to 6.6 micromol m(-2) s(-1)), PAR (392 to 564 micromol m2 sec(-1)), LUE (0.006 to 0.015) and WUE (0.0001 to 0.011) did not vary significantly across all five wheat sites (p > 0.05). P(N) and E(T) were strongly coupled and highly correlated with PAR (p < 0.001). Best multiple linear regression (MLR) models accounted for 92% of variations in P(N) as a function of PAR and E(T), and 90% in E(T) as a function of PAR and RH (p < 0.001). P(N) exhibited a peak at mid-morning, and a photosynthetic midday depression under the limiting effects of high evaporative demand. Diurnal variations in WUE and LUE showed a bimodal behavior with the maximum values in early morning and late afternoon. As the impacts of global climate change become increasingly felt, continuous measurements of climate-crop-soil-managementinteractions under natural conditions play a pivotal role not only in exploring changes in ecophysiological properties of strategic crops for food security such as wheat but also in devising preventive and mitigative management practices to ensure sustained agricultural productivity.