Analysis of Total Work Inability in Poland in 2000 and 2001 According to Age,Disease Diagnosis and Occupation

This study was to determine the main health-related reasons, age and occupation of those who took ear retirement due to total work inability. This was done through an analysis of the data from Poland’s Soci Insurance Institution (ZUS) from 2000 and 2001. An analysis of these data showed an increase in the numb of certificates confirming total inability to work in people over 40 years old. Over 50% of certificates wo, were issued to workers in 2 age-groups: 45–49 and 50–54.

Diseases of the circulatory system, musculoskeletal system and connective tissue as well as mental and behavioural disorders are the main causes of early inability to work. Approximately 70% of people who obtained certificates confirming total inability to work had blue- and blue-and-white-collar jobs.     

Occupational Exposure to Natural UV Radiation and Premature Skin Ageing

The skin is the part of the human body most vulnerable to ultraviolet (UV) radiation. The spectrum of the negative effects of UV radiation on the skin ranges from acute erythema to carcinogenesis. Between these extreme conditions, there are other common skin lesions, e.g.,photoageing. The aim of this study was to assess the skin for signs of photoageing in a group of 52 men occupationally exposed to natural UV radiation. There were 2 types of examinations: an examination of skin condition (moisture, elasticity, sebum, porosity, smoothness, discolourations and wrinkles) with a device for diagnosing the skin, and a dermatological examination. The results of both examinations revealed a higher percentage of skin characteristics typical for photoageing in outdoor workers compared to the general population.     

Vulnerability assessment and adaptation to the impacts of sea level rise on the Kingdom of Bahrain

This paper assesses quantitatively the impact of sea level rise (SLR) at the global and regional scale as a result of climate change (CC) on the coastal areas of the Kingdom of Bahrain’s islands (36 Islands). The standard Intergovernmental Panel on Climate Change (IPCC) guidelines was modified as appropriate for the situation of the study area. Geographic Information Systems (GIS) coupled with Remote Sensing (RS) were used as the main techniques of collecting, analyzing, modeling simulating and disseminating information to build SLR scenarios in a geographically referenced context. Also, these tools were used to assess vulnerability and risk of the coastal area of the islands with the expectation that coastal planner and government authorities will profit from integrating these knowledge into a broad based environmental decision making. Three SLR scenarios: low, moderate and high were developed to examine the impacts from SLR on all islands. The low SLR scenario (Optimistic) assumes a 0.5-m rise above current sea level, the moderate scenario (Intermediate) assumes a one meter rise, and the high scenario (Pessimistic) assumes a 1.5 m rise in sea level. Two more SLR scenarios were assumed to perform risk analysis, a 2 and 5 meter rise above current sea level. The simulation of SLR are quite straightforward, emphasizing on the uses of both of the data that are incorporated from the satellite images and the created Digital Elevation Model (DEM) to estimate SLR scenarios that are adapted in the study. These data were used to predict consequences of the possibility of the rise in sea level at different scenarios which may alter the landuse and patterns of human communities. Results indicate that low-lying coastal areas of Bahrain islands are at risk from the effects of any SLR resulting from CC. These islands are vulnerable under different SLR Scenarios. More than 17% of the country total area may be inundated under 1.5 m SLR in 2100. The total area that might be lost under different sea level scenarios will vary from more than 77 km² if SLR reaches 0.5 m, to about 100 km² under 1.0 m SLR and may reach 124 km² under 1.5 m SLR scenario. The total inundated areas due to risk scenarios will reach 133 km², if the SLR rises to 2.0 m, and it is estimated to be more than (22%) of the main island total area. Under the second scenario, if the SLR reaches 5.0 m, the main islands will lose approximately half of its area (47%) equal to 280 km². Hawar islands group will lose about (30%) of its total area under 2.0 m SLR, which is about 15.5 km².A SLR adaptation policy framework (APF) and adaptation policy initiatives (APIs) are suggested for planners to build upon for reducing the likely effects of SLR in the Kingdom of Bahrain. The framework is composed of four steps namely, acquisition of information, planning and design, implementation and monitoring and evaluation. A general policy framework for a national response to SLR is suggested. Additionally, a range of policy adaptation options/initiatives to sustain coastal developments under the likely effects of SLR are recommended.     

Immune responses,DNA damage and ultrastructural alterations of gills in the marine mussel Lithophaga lithophaga exposed to CuO nanoparticles

Environmental Science and Pollution Research - Nanoparticle (NP) pollution is a worldwide problem. Copper oxide nanoparticles (CuO NPs) are one of the most used NPs in a variety of applications,...     

The Distribution and Sources of Polycyclic Aromatic Hydrocarbons in Surface Sediments Along the Egyptian Mediterranean Coast

Coastal marine sediment samples were collected from 31 sampling stations along the Egyptian Mediterranean Sea coast. All sediment samples were analyzed to determine aliphatic and polycyclic aromatic hydrocarbons (PAHs) as well as total organic carbon (TOC) contents and grain size analysis. Total concentrations of 16 EPA-PAHs in the sediments were varied from 88 to 6338 ng g⁻¹ with an average value of 154 ng g⁻¹ (dry weight). However, the concentrations of total aliphatic were varied from 1.3 to 69.9 ng g⁻¹ with an average value of 15.6 ng g⁻¹ (dry weight). The highest contents of PAHs were found in the Eastern harbor (6338 ng g⁻¹), Manzala (5206 ng g⁻¹) and El-Jamil East (4895 ng g⁻¹) locations. Good correlations observed between a certain numbers of PAH concentrations allowed to identify its origin. The average total organic carbon (TOC) percent was varied from 0.91 to 4.54%. Higher concentration of total pyrolytic hydrocarbons (∑COMB) than total fossil hydrocarbons (∑PHE) declared that atmospheric fall-out is the significant source of PAHs to marine sediments of the Egyptian Mediterranean coast. The selected marked compounds, a principal component analysis (PCA) and special PAHs compound ratios (phenanthrene/anthracene vs fluoranthene/pyrene; ∑COMB/∑EPA-PAHs) suggest the pyrogenic origins, especially traffic exhausts, are the dominant sources of PAHs in most locations. Interferences of rather petrogenic and pyrolytic PAH contaminations were noticed in the harbors due to petroleum products deliveries and fuel combustion emissions from the ships staying alongside the quays.     

Restoring the plant productivity of heavy metal-contaminated soil using phosphate sludge, marble waste, and beneficial microorganisms

Assisted natural remediation (ANR) has been highlighted as a promising, less expensive, and environmentally friendly solution to remediate soil contaminated with heavy metals. We tested the effects of three amendments (10% compost, C; 5 or 15% phosphate sludge, PS5 and PS15; and 5 or 15% marble waste, MW5 and MW15) in combination with microorganism inoculation (rhizobacteria consortium alone, mycorrhizae alone, and the two in-combination) on alfalfa in contaminated soil. Plant concentrations of Zn, Cu, and Pb were measured, along with proline and malondialdehyde production. The microbiological and physicochemical properties of the mining soil were evaluated. Application of the amendments allowed germination and promoted growth. Inoculation with the rhizobacteria consortium and/or mycorrhizae stimulated plant growth. PS and MW stimulated the production of proline. Inoculation of alfalfa with the rhizobacteria-mycorrhizae mixture and the application of MW allowed the safe cultivation of the legume, as shown by the low concentrations of metals in plant shoots. Zn and Pb concentrations were below the limits recommended for animal grazing and accumulated essentially in roots. Soil analyses showed the positive effect of the amendments on the soil physicochemical properties. All treatments increased soil pH (around 7), total organic carbon, and assimilable phosphorus content. Notably, an important decrease in soluble heavy metals concentrations was observed. Overall, our findings revealed that the applied treatments reduced the risk of metal-polluted soils limiting plant growth. The ANR has great potential for success in the restoration of polymetallic and acidic mining soils using the interaction between alfalfa, microorganisms, and organo-mineral amendments.     

Process control in municipal solid waste incinerators: survey and assessment.

As there is only rare and scattered published information about the process control in industrial incineration facilities for municipal solid waste (MSW), a survey of the literature has been supplemented by a number of waste incineration site visits in Belgium and The Netherlands, in order to make a realistic assessment of the current status of technology in the area. Owing to the commercial character, and therefore, the confidentiality restrictions imposed by plant builders and many of the operators, much of the information collected has either to be presented in a generalized manner, and in any case anonymously. The survey was focused on four major issues: process control strategy, process control systems, monitors used for process control and finally the correlation between the 850 degrees C/2 s rule in the European waste incineration directive and integrated process control. The process control strategies range from reaching good and stable emissions at the stack to stabilizing and maximizing the energy output from the process. The main indicator to be monitored, in cases in which the focus is controlling emissions, is the oxygen content in the stack. Keeping the oxygen concentration in a determined range (usually between 8 and 12 vol.%) ensures stable and tolerated concentrations of the gaseous emissions. In the case for which stabilization of energy production is the principal aim, the main controlled parameter is the steam temperature and flow-rate, which is usually related to the fuel energetic input. A lot of other parameters are used as alarm criteria, the most common of which is the carbon monoxide concentration. The process control systems used most commonly feature partially automated classical proportional integral derivative (PID) controllers. New and innovative process control systems, such as fuzzy-logic control systems, are still unknown to most plant managers while their performance is reported to be unsatisfactory in plants in which such systems have been tested or are in use. Monitoring components used in process control are still based on classical tools such as thermocouples. The use of modern and more reliable sensors is very limited due to the high initial investment cost or simply the fear of using non-standard technologies. Complying with the 850 degrees C/2 s rule in the European waste incineration directive generally is seen to be a handicap for the process control, either in terms of cost, or flexibility of reaction, or both, particularly in old incineration facilities where such restrictions were not planned in the design.     

Inorganic mercury and methylmercury in surface sediments and mussel tissues from a microtidal lagoon (Bizerte, Tunisia)

The aim of this study was to investigate the distribution of mercury compounds in marine sediments and mussel tissues collected in the lagoon of Bizerte, Tunisia, during two seasons (summer and winter). Inorganic mercury (Hg²⁺) concentrations in sediments were found to be highly variable, ranging from 0.04 nmol.g¹ to 3.22 nmol.g⁻¹ (dry weight) with a mean value of 0.52 nmol.g⁻¹. Anthropogenic sources of Hg²⁺, most probably metallurgy or tire production industries, have been evidenced. The mean concentration of monomethylmercury (MeHg⁺) in the surface sediments is 2.32 pmol g⁻¹ ranging from below the detection limit (0.45 pmol.g⁻¹) to 14.6 pmol.g⁻¹. No significant variation was observed between winter and summer seasons for both mercury species concentration in the sediments. The Hg²⁺ concentrations in mussel tissues are also variable, ranging from 0.007 to 1.347 nmol.g⁻¹ (dry weight). The mean concentration is 0.70 nmol.g⁻¹. In these tisssues, Hg²⁺ is generally the major compound, making up ca. 88% of total mercury concentrations. However, methylmercury concentrations are significant and homogeneous, ranging from 62 to 121 pmol.g⁻¹ (mean 96 pmol.g⁻¹). The results suggest that a fraction of the inorganic mercury load in the sediments of the lagoon undergoes methylation pathways. MeHg⁺ produced is assimilated in the mussels more readily than Hg²⁺.