Land suitability assessment for wind power plant site selection using ANP-DEMATEL in a GIS environment: case study of Ardabil province,Iran

Wind energy is a renewable energy resource that has increased in usage in most countries. Site selection for the establishment of large wind turbines, called wind farms, like any other engineering project, requires basic information and careful planning. This study assessed the possibility of establishing wind farms in Ardabil province in northwestern Iran by using a combination of analytic network process (ANP) and decision making trial and evaluation laboratory (DEMATEL) methods in a geographical information system (GIS) environment. DEMATEL was used to determine the criteria relationships. The weights of the criteria were determined using ANP and the overlaying process was done on GIS. Using 13 information layers in three main criteria including environmental, technical and economical, the land suitability map was produced and reclassified into 5 equally scored divisions from least suitable to most suitable areas. The results showed that about 6.68 % of the area of Ardabil province is most suitable for establishment of wind turbines. Sensitivity analysis shows that significant portions of these most suitable zones coincide with suitable divisions of the input layers. The efficiency and accuracy of the hybrid model (ANP-DEMATEL) was evaluated and the results were compared to the ANP model. The sensitivity analysis, map classification, and factor weights for the two methods showed satisfactory results for the ANP-DEMATEL model in wind power plant site selection.     

A Box-Behnken design for determining the optimum experimental condition of the fungicide (Vapam) sorption onto soil modified with perlite

In the present study, response surface methodology (RSM) based on the Box-Behnken design (BBD) was employed to investigate the effects of the different operating conditions on the removal of the fungicide (Vapam) onto soil modified with perlite using sorption process. The process parameters such as pH of the fungicide solution (2, 5 and 8), temperature (15, 25 and 35°C), shaking time (2, 13 and 24 h) and the percentage of perlite in the modified soil (0, 2 and 4 %) were investigated using a four-factor-three-level Box-Behnken design at an initial fungicide concentration of C(0) = 1.6 mg/L as a fixed input parameter. A second-order quadratic model suggested the optimum conditions to be as follows: fungicide solution pH of 3.57, temperature of 15°C, shaking time of 3.5 h and 4% of perlite in the modified soil which resulted in the improvement of Vapam sorption. Under optimum conditions, the fungicide (Vapam) removal was predicted 12.88 μg/g by BBD. The confirmatory experiments were conducted and the results revealed that the fungicide removal was 13.14 μg/g which indicated that the predicted and the observed values of response (Vapam removal) were in close agreement. Therefore, the soil modified with perlite holds good potential for Vapam sorption. This is the first report on fungicide Vapam sorption onto soil modified with perlite using statistical experimental design employing response surface methodology.     

Spatial and temporal analysis of the COVID-19 incidence pattern in Iran

Environmental Science and Pollution Research - In the present paper, province-level variations of novel coronavirus (COVID-19) disease incidence across Iran were investigated. To this end, a...     

Evaluation of SARS-CoV-2 in Indoor Air of Sina and Shahid Beheshti Hospitals and Patients' Houses

Food and Environmental Virology - Side by side air sampling was conducted using a PTFE filter membrane as dry sampler and an impinger containing a suitable culture medium as a wet sampler. Most of...     

Iodine deficiency status in the WHO Eastern Mediterranean Region: a systematic review

Iodine deficiency is a global public health issue because iodine plays a major role in the thyroid hormone synthesis and is essential for normal neurological development. This review summarizes the publications on iodine status in the WHO Eastern Mediterranean Region (EMR) countries. All related studies available in main national and international databases were systematically searched using some specific keywords to find article published between 1909 and 2015. The prevention of iodine deficiency disorders (IDDs) in the WHO EMR countries is currently under control without significant side effects. Mild to severe IDDs exist in some countries of the Middle East, due to lack of effective iodine supplementation program, but the Islamic Republic of Iran, Jordan, Bahrain and Tunisia have achieved the goal of universal salt iodization. Overall, despite enormous efforts to control IDDs, still IDD remains a serious public health problem in some countries of the region, requiring urgent control and prevention measures.     

Synthesis of carboxylic dithiocarbamic anhydride and substituted thiourea derivatives in water

The use of water as a solvent has sometimes benefits such as improving reactivities and selectivities, simplifying work-up procedures, and environmentally benign. Many carboxylic dithiocarbamic anhydride products are valuable building blocks in heterocycles and natural products. Here we present a simple one-pot synthesis of carboxylic dithiocarbamic anhydride by condensation of amines, carbon disulfide, acyl halide, or acetic anhydride in water. We obtained a variety of biologically important acyl dithiocarbamate derivatives in 82–93% yields in 10–30 min. This procedure can be used for the synthesis of thioureas from dithiocarbamates. Here, the sequential, one-pot three-component reaction of amines, carbon disulfide, and isothiocyanates provides unsymmetrical substituted thioureas in 81–91% yields.     

Assessment of dietary intakes of nineteen pesticide residues among five socioeconomic sections of Hyderabad—a total diet study approach

Total diet study approach was used to assess the dietary intakes of pesticide residues among the select population in Hyderabad. When assessed by a food frequency questionnaire, it was found that the food intakes varied among five socioeconomic sections (SES). Therefore, we intended to compare the intakes of pesticide residues through these foods among the five SES. A total of 195 foods from different markets were collected and analyzed for 19 pesticides. The residues were analyzed with a gas chromatograph and were confirmed with mass spectrometry. About 51 % of the samples were detected with one or more residues. Thirteen out of the 19 residues were present in levels above detection limits in various concentrations. The median concentrations of the residues in all the samples tested, ranged from 0.00010 to 0.33 mg/kg. Highest median concentration was for β-HCH in water samples. Exposures to all the residues were below the respective ADIs at both mean and 95th percentile levels of food intakes with highest estimated dietary intakes (EDIs) of β-HCH in both the cases. The EDIs of β-HCH were the highest among all the residues at both the intake levels among all the SES. The EDIs of β-HCH were significantly higher in lower SES than higher SES possibly due to the consumption of rice cooked in water contaminated with β-HCH. EDIs for other residues did not differ significantly among the five SES.     

A Box-Behnken design for determining the optimum experimental condition of the fungicide (Vapam) sorption onto soil modified with perlite

In the present study, response surface methodology (RSM) based on the Box-Behnken design (BBD) was employed to investigate the effects of the different operating conditions on the removal of the fungicide (Vapam) onto soil modified with perlite using sorption process. The process parameters such as pH of the fungicide solution (2, 5 and 8), temperature (15, 25 and 35°C), shaking time (2, 13 and 24 h) and the percentage of perlite in the modified soil (0, 2 and 4 %) were investigated using a four-factor-three-level Box-Behnken design at an initial fungicide concentration of C₀ = 1.6 mg/L as a fixed input parameter. A second-order quadratic model suggested the optimum conditions to be as follows: fungicide solution pH of 3.57, temperature of 15°C, shaking time of 3.5 h and 4% of perlite in the modified soil which resulted in the improvement of Vapam sorption. Under optimum conditions, the fungicide (Vapam) removal was predicted 12.88 μg/g by BBD. The confirmatory experiments were conducted and the results revealed that the fungicide removal was 13.14 μg/g which indicated that the predicted and the observed values of response (Vapam removal) were in close agreement. Therefore, the soil modified with perlite holds good potential for Vapam sorption. This is the first report on fungicide Vapam sorption onto soil modified with perlite using statistical experimental design employing response surface methodology.     

Parameter optimization of the fungicide (Vapam) sorption onto soil modified with clinoptilolite by Taguchi method

This study employs the Taguchi optimization methodology to optimize the effective parameters for the pesticide (Vapam) sorption onto soil modified with natural zeolite (clinoptilolite). The experimental factors and their ranges chosen for determination of the effective parameters were: initial Vapam concentration (0.4-1.6 mg/L), initial pH of the pesticide solution (2-12), the percentage of clinoptilolite in the modified soil (0-6 %), temperature (15-35°C) and shaking time (2-24 h). The orthogonal array (OA) L(16) and the bigger the better response category of the Taguchi method were selected to determine the optimum conditions: initial Vapam concentration (1.2 mg/L), initial pH of the pesticide solution (2), the percentage of clinoptilolite in the modified soil (4 %), temperature (15°C) and shaking time (2 h). The results showed that in comparison with other parameters, the initial Vapam concentration was the most effective one for the sorption of this pesticide onto soil, modified with clinoptilolite. Moreover, after determining the optimum levels of the sorption process parameters, confirmation experiments were performed to prove the effectiveness of the Taguchi's experimental design methodology.     

Parameter optimization of the fungicide (Vapam) sorption onto soil modified with clinoptilolite by Taguchi method

This study employs the Taguchi optimization methodology to optimize the effective parameters for the pesticide (Vapam) sorption onto soil modified with natural zeolite (clinoptilolite). The experimental factors and their ranges chosen for determination of the effective parameters were: initial Vapam concentration (0.4–1.6 mg/L), initial pH of the pesticide solution (2–12), the percentage of clinoptilolite in the modified soil (0–6 %), temperature (15–35°C) and shaking time (2–24 h). The orthogonal array (OA) L₁₆ and the bigger the better response category of the Taguchi method were selected to determine the optimum conditions: initial Vapam concentration (1.2 mg/L), initial pH of the pesticide solution (2), the percentage of clinoptilolite in the modified soil (4 %), temperature (15°C) and shaking time (2 h). The results showed that in comparison with other parameters, the initial Vapam concentration was the most effective one for the sorption of this pesticide onto soil, modified with clinoptilolite. Moreover, after determining the optimum levels of the sorption process parameters, confirmation experiments were performed to prove the effectiveness of the Taguchi's experimental design methodology.