Evaluation of existing equations for temporal scour depth around circular bridge piers

Scour is defined as the processes of removal of sediment particles from water stream bed by the erosive action of activated water, and also carries sediment away from the hydraulic structures. Scour is the main cause of pier failure. Numerous equations are available for estimating temporal and equilibrium scour depth. The present study describes the phenomenon of temporal scour depth variation at bridge piers and deals with the methods for its estimation. The accuracy of six temporal scour depth equations are also checked in this study. After graphical and statistical analysis, it was found that the relationship proposed by Oliveto and Hager (J Hydraul Eng (ASCE) 128(9):811–520, 2002) predicts temporal scour depth better than other equations. Three equations of equilibrium time of scour are also used for computing equilibrium time. Equilibrium time equation proposed by Choi and Choi (Water Environ J 30(1–2):14–21, 2016) gives better agreements with observed values.     

Simulation of dam/levee-break hydrodynamics with a three-dimensional implicit unstructured-mesh finite element model

Dam failures usually cause huge economic and life losses , especially in urban areas where there is a high concentration of inhabitants and economic actors. In order to understand the physical mechanisms of the formation and development of dam-break flooding, lots of efforts have been put into different types of modelling techniques. However, most of existing models are 1D (one-dimensional) or 2D models based on the shallow water equations. In this paper, we present a 3D numerical modelling investigation of dam-break flow hydrodynamics in an open L-shape channel. A newly developed 3D unstructured mesh finite element model is used here. An absorption-like term is introduced to the Navier–Stokes equations in order to control the conditioning of the matrix equation in the numerical solution process and thus improve the stability. A wetting and drying algorithm is used here to allow the free surface height to be treated with a high level of implicitness and stability. The 3D model has been validated by comparing the results with the published experimental data. Good agreement has been achieved at six selected locations. This study shows that the 3D unstructured mesh model is capable of capturing the 3D hydraulic aspects and complicated local flows around structures in simulation of dam-break flows.     

Ecosystem responses to climate change at a Low Arctic and a High Arctic long-term research site

Long-term measurements of ecological effects of warming are often not statistically significant because of annual variability or signal noise. These are reduced in indicators that filter or reduce the noise around the signal and allow effects of climate warming to emerge. In this way, certain indicators act as medium pass filters integrating the signal over years-to-decades. In the Alaskan Arctic, the 25-year record of warming of air temperature revealed no significant trend, yet environmental and ecological changes prove that warming is affecting the ecosystem. The useful indicators are deep permafrost temperatures, vegetation and shrub biomass, satellite measures of canopy reflectance (NDVI), and chemical measures of soil weathering. In contrast, the 18-year record in the Greenland Arctic revealed an extremely high summer air-warming of 1.3 °C/decade; the cover of some plant species increased while the cover of others decreased. Useful indicators of change are NDVI and the active layer thickness.     

Interaction webs in arctic ecosystems: Determinants of arctic change?

How species interact modulate their dynamics, their response to environmental change, and ultimately the functioning and stability of entire communities. Work conducted at Zackenberg, Northeast Greenland, has changed our view on how networks of arctic biotic interactions are structured, how they vary in time, and how they are changing with current environmental change: firstly, the high arctic interaction webs are much more complex than previously envisaged, and with a structure mainly dictated by its arthropod component. Secondly, the dynamics of species within these webs reflect changes in environmental conditions. Thirdly, biotic interactions within a trophic level may affect other trophic levels, in some cases ultimately affecting land–atmosphere feedbacks. Finally, differential responses to environmental change may decouple interacting species. These insights form Zackenberg emphasize that the combination of long-term, ecosystem-based monitoring, and targeted research projects offers the most fruitful basis for understanding and predicting the future of arctic ecosystems.     

Riparian rehabilitation planning in an urban–rural gradient: Integrating social needs and ecological conditions

In the present context of global change and search for sustainability, we detected a gap between restoration and society: local communities are usually only considered as threats or disturbances when planning for restoration. To bridge this gap, we propose a landscape design framework for planning riparian rehabilitation in an urban–rural gradient. A spatial multi-criteria analysis was used to assess the priority of riversides by considering two rehabilitation objectives simultaneously—socio-environmental and ecological—and two sets of criteria were designed according to these objectives. The assessment made it possible to identify 17 priority sites for riparian rehabilitation that were associated with different conditions along the gradient. The double goal setting enabled a dual consideration of citizens, both as beneficiaries and potential impacts to rehabilitation, and the criteria selected incorporated the multi-dimensional nature of the environment. This approach can potentially be adapted and implemented in any other anthropic–natural interface throughout the world.     

Mycoremediation of hydrocarbons with basidiomycetes—a review

ABSTRACT

The literature on hydrocarbon remediation with basidiomycetes was reviewed. Two ecological groups are considered for bioremediation, the saprotrophic basidiomycetes (white-rot and brown-rot fungi) and the ectomycorrhizal basidiomycetes. A remarkable capacity of basidiomycetes for in vitro degradation of simple and recalcitrant hydrocarbons, such as PAH, persistent organic pollutants (POPs), halogenated HC, aromatic HC and phenols, explosives and dyes was reported for many species. However, there is a need for more studies on the practical feasibility of field applications with basidiomycetes.     

Seasonal variation of chemical composition and source apportionment of PM2.5 in Pune,India

Environmental Science and Pollution Research - Particulate matter with size less than or equal to 2.5 μm (PM2.5) samples were collected from an urban site Pune, India, during April...     

Overview of surface measurements and spatial characterization of submicrometer particulate matter during the DISCOVER-AQ 2013 campaign in Houston,TX

The sources of submicrometer particulate matter (PM₁) remain poorly characterized in the industrialized city of Houston, TX. A mobile sampling approach was used to characterize PM₁ composition and concentration across Houston based on high-time-resolution measurements of nonrefractory PM₁ and trace gases during the DISCOVER-AQ Texas 2013 campaign. Two pollution zones with marked differences in PM₁ levels, character, and dynamics were established based on cluster analysis of organic aerosol mass loadings sampled at 16 sites. The highest PM₁ mass concentrations (average 11.6 ± 5.7 µg/m³) were observed to the northwest of Houston (zone 1), dominated by secondary organic aerosol (SOA) mass likely driven by nighttime biogenic organonitrate formation. Zone 2, an industrial/urban area south/east of Houston, exhibited lower concentrations of PM₁ (average 4.4 ± 3.3 µg/m³), significant organic aerosol (OA) aging, and evidence of primary sulfate emissions. Diurnal patterns and backward-trajectory analyses enable the classification of airmass clusters characterized by distinct PM sources: biogenic SOA, photochemical aged SOA, and primary sulfate emissions from the Houston Ship Channel. Principal component analysis (PCA) indicates that secondary biogenic organonitrates primarily related with monoterpenes are predominant in zone 1 (accounting for 34% of the variability in the data set). The relevance of photochemical processes and industrial and traffic emission sources in zone 2 also is highlighted by PCA, which identifies three factors related with these processes/sources (~50% of the aerosol/trace gas concentration variability). PCA reveals a relatively minor contribution of isoprene to SOA formation in zone 1 and the absence of isoprene-derived aerosol in zone 2. The relevance of industrial amine emissions and the likely contribution of chloride-displaced sea salt aerosol to the observed variability in pollution levels in zone 2 also are captured by PCA.

Implications: This article describes an urban-scale mobile study to characterize spatial variations in submicrometer particulate matter (PM₁) in greater Houston. The data set indicates substantial spatial variations in PM₁ sources/chemistry and elucidates the importance of photochemistry and nighttime oxidant chemistry in producing secondary PM₁. These results emphasize the potential benefits of effective control strategies throughout the region, not only to reduce primary emissions of PM₁ from automobiles and industry but also to reduce the emissions of important secondary PM₁ precursors, including sulfur oxides, nitrogen oxides, ammonia, and volatile organic compounds. Such efforts also could aid in efforts to reduce mixing ratios of ozone.     

Value chain for next-generation biofuels: resilience and sustainability of the product life cycle

Multiple factors including climate change, price uncertainties, and geopolitical instability have prompted many industries to investigate the feasibility of replacing traditional petroleum-based fuels with biofuel alternatives. However, to make this transition successful, these new biofuels must be environmentally sustainable and the necessary support infrastructure must be in place to make the production, distribution, and storage of these biofuels technologically feasible and cost effective. Developing a value chain, spanning from feedstock production to distribution to end users, requires garnering buy-in from multiple stakeholders by demonstrating environmental, economic, and social benefits and incentives. Two critical factors are the environmental benefits achieved from the use of the biofuel technology and the degree of resilience of the value chain to emergent conditions to ensure steady supply to consumers. Moreover, different biofuel pathways have different costs, benefits, and risks which must be compared. In this paper, we describe how environmental sustainability can be modeled using life cycle assessment (LCA) and how the resilience of value chain initiatives can be modeled using a scenario-based decision model. We then describe how sustainability and resilience assessments can be integrated in an iterative, anticipatory LCA framework. These assessments can be used as the basis for a business case for various investments, as well as a means for promoting responsible innovations, with the aviation industry used as a case study.     

Influence of age,season, body condition and geographical area on concentrations of chlorinated and brominated contaminants in wild mink (Neovison vison) in Sweden

The wild mink has gained acceptance as a sentinel species in environmental monitoring. However, only limited data are available in the literature on factors driving variability in concentrations of organic pollutants in this species. This study characterizes the differences in contaminant concentrations in subcutaneous fat of male mink from four different areas in Sweden and demonstrates how age, season and body condition influence concentrations of polychlorinated biphenyl (PCB) congeners, polybrominated diphenyl ether (PBDE) congeners (including methoxylated forms, MeO-PBDEs), as well as the pesticides dichlorodiphenyldichloroethylene (DDE), chlordane and hexachlorobenzene (HCB). The data were statistically treated using multiple regression and principal component analysis. The ∑PCB concentration and concentrations of PCB congeners 138, 156, 157, 180, 170/190, 189, 194, 206, 209 as well as PBDE 153/154 varied with age. Season had an influence on ∑PCB, PBDE 47 and PBDE 153/154 concentrations, as well as concentrations of most PCB congeners, with the exception of PCB 101, 110, 141 and 182/187. Lean mink had higher concentrations of most PCBs and PBDEs than mink with larger fat depots. The analyzed pesticides (DDE, oxychlordane, HCB) showed no systematic variation with season, age or body condition. The concentrations of MeO-PBDEs were generally low and 6MeO-PBDE 47 was the most commonly detected MeO-PBDE in mink from marine, brackish and freshwater areas. The results indicate that age, season and body condition are factors that may influence the concentrations of PCBs and PBDEs, and it is thus recommended to take these factors into account when analyzing mink exposure data.