Criteria for the evaluation of dioxins in the environment

In FRG and other countries unequivocal criteria for the limitation of dioxins (PCDD's/PCDF's) in food like vegetables and fruits are lacking. These have to be directly associated with the limitation of dioxins in the soil and the deposition of particulate matter as the two main pathways for plant contamination. Based on recent investigations in the vicinity of cable-waste incinerators in Northrhine-Westphalia with comparatively high contents of dioxins in garden plants and soils and other sources of dioxins, considerations are given for the establishment of the criteria urgently needed.     

Surfactant solubilization of hydrophobic compounds in soil and water

The soil/water partition coefficient (K_d) of hexachlorobenzene (HCB) ranged from 220 1/kg to 1800 1/kg for eight soils having a wide range of physico-chemical properties. K_d normalised to soil organic carbon (K_oc) was found to be 28000 ± 4800 1/kg. Anionic surfactant dodecylsulphate (DS) present at concentrations above the critical micellar concentration (CMC) caused reductions in the apparent soil/water partition coefficient (K_d ^*) in the range of 3–26 times for most soils and up to 36–91 times for sandy soils. Below CMC, at environmentally relevant surfactant concentrations, K_d ^* was reduced by a factor of 1–13. For clay and calcareous soils significant adsorption/complexation/precipitation of DS occurred. At the lowest DS concentration this produced a two-fold increase in K_d ^*. At increasing DS concentrations this effect was shielded by the solubihzing effect from DS. Monomer (K_mn) and micellar (K_mc) surfactant/water partition coefficients for HCB were determined to be, 980 ± 190 1/kg and 21000 ± 1600 1/kg, respectively.     

Comparison of two methods for the determination of total organic halogen (TOX) in receiving waters

Two methods for the determination of total organic halogen (TOX), orginating from bleaching of pulp, in receiving waters have been compared. One of the methods (AC/MC) is based on adsorption of the halogenated matter onto an activated carbon sorbent. The halogen is determined by a microcoulometric technique after combustion of the carbon. The other method (XAD/PT) uses an XAD resin as sorbent and the determination of the halogen is carried out by potentiometric titration after a schöniger combustion of the resin eluate.Both methods showed good performance for samples consisting of spent bleach liquors diluted with distilled, fresh and brackish water. The repeatability was very good with a relative standard deviation less than a few per cent. The detection limit of the AC/MC method is about 0.1 μmol/1 and for the XAD/PT method about ten times higher. The AC/MC method gave in most cases 10–20% higher TOX concentrations compared to the XAD/PT method.     

Cadmium concentration in tobacco (Nicotiana tabacum L.) from different countries and its relationship with other elements

Cadmium accumulation in crop plants, such as tobacco (Nicotiana tabacum L.), can lead to human exposure to this carcinogenic metal. To better define actual Cd distribution in cured or processed tobacco leaves from chief tobacco-producing regions, we analyzed 755 leaf samples of three major types (Flue-cured, Burley, and Oriental) obtained from 13 countries during 2001-2003. This survey may help identify regions with low- or high-Cd concentrations in tobacco to obtain insight into the cause of the concentration extremes and to assist in defining strategies to reduce Cd in tobacco. Cadmium concentrations in the samples ranged from 0 to 6.78 microg g(-1), as determined by ICP-MS. Significant differences were found among types and among countries, but significant interactions between type and country were found. Variations in Cd concentrations were also found in all countries. Our results suggest an important contribution of the field (e.g., bioavailable Cd in soil, other soil characteristics) to the Cd concentration in tobacco. Finally, the correlation between the concentration of Cd and that of other elements differed among the types, which could be effectively discriminated based on the concentrations of 20 elements.     

Melamine-based organoclay to sequester atrazine

Sequestration of aqueous atrazine by organoclays prepared from the surfactant 6-piperazin-1-yl-N,N'-bis-(1,1,3,3-tetramethyl-butyl)-(1,3,5)triazine-2,4-diamine and Gonzales bentonite was assessed using 14C-labeled atrazine. Organoclays with varying ratios of surfactant to clay were evaluated with respect to their ability to sequester atrazine from an aqueous solution. Organoclays containing 100-200 g kg-1 surfactant on a total weight basis provided the most efficient adsorption of atrazine, with apparent KOC values exceeding 5000 l kg-1 at these loading fractions. Less than 12% of sequestered atrazine was released during four sequential day long washings, supporting our expectation that the majority of the reaction of atrazine with the surfactant lead to irreversible chemical bond formation through nucleophilic aromatic substitution.     

Removal of PCB-DNAPL from a rough-walled fracture using alcohol/polymer flooding

Phase behaviour experiments employing PCB (Aroclor 1242)/alcohol/water systems were conducted with ethanol (EtOH) and n-propanol (nPA). Both exhibited an affinity for the aqueous phase within the entire two-phase region. As much as 88% by volume (88% vol.) EtOH and 80% vol. nPA were necessary to achieve full miscibility of the PCB in the aqueous phase. DNAPL-water interfacial tension (IFT) was reduced from 38.9 dyn/cm to 4.7 dyn/cm and 2.4 dyn/cm with 80% vol. EtOH and 76% vol. nPA. The addition of alcohol brought about 41% and 54% reductions in DNAPL viscosity at maximal concentrations of EtOH and nPA. Density of the PCB-DNAPL was relatively unaffected by the presence of alcohol. A series of seven experiments were conducted where successive slugs of nPA and xanthan gum polymer solutions were injected into a fractured shale sample. A 30% vol. nPA solution injected under a hydraulic gradient of 0.36 allowed enhanced PCB removal primarily through reduction of IFT and resulted in 72% DNAPL recovery. Several pore volumes of alcohol solution were necessary to displace all the potentially mobile non-wetting phase since the high-viscosity DNAPL was mobilized at a lower flow rate than the overall fluid velocity, illustrating non-piston displacement. The injection of a 95% vol. nPA alcohol solution, theoretically at a sufficient concentration to produce fully miscible displacement of the residual DNAPL at equilibrium, resulted in non-equilibrium partitioning of the PCB into the flushing solution, likely due to the high fluid velocities in the fracture. The injection of 200 pore volumes of 95% vol. nPA solution resulted in 94% DNAPL recovery. Alcohol floods operated below the miscibility envelope appear to be a valuable source zone remedial alternative where the objective is to reduce DNAPL mobility to zero, but it should be noted that DNAPL mobility is increased during the application of the technology and steps may need to be taken to prevent unwanted vertical mobilization.     

Sources and fate of butyltins in the St. Lawrence Estuary ecosystem

Butyltins (BTs) were determined in sediment, zooplankton, benthic fish and invertebrates in the St. Lawrence Estuary and its mixing zone with the Gulf of St. Lawrence (Canada) in an attempt to assess sources and fate of these compounds in a large ecosystem before the enforcement of the world-wide ban of TBT-based antifouling paints. All BTs (MBT, DBT and TBT) were found along the studied area (450 km) where the traffic of large vessels occurs around the year. Concentrations of total butyltins (BTs) in surface sediment were below 6 ng Sn g(-1) d.w. Total BTs concentrations found in zooplankton samples at the mouth of the Saguenay Fjord were the highest (793 ng Sn g(-1) d.w.), indicating the influence of the Fjord on the St. Lawrence contamination. Although a relatively low contamination level was measured in sediment, total BTs concentrations ranged from 9 to 489 ng Sn g(-1) d.w. for benthic organisms. Biota-sediment accumulation factors (BSAFs), calculated on the basis of the organic carbon content in the sediment (concentrations normalized to 1% Corg), ranged from 0.9 to 98.3, and are an indicator of an important source of BTs from the Saguenay Fjord particulate matter. This may be explained by the fact that when TBT is released in a large and deep well stratified coastal environment, it could bind to the suspended particulate matter and then be taken in charge by water column organisms and may be mostly metabolised before it reaches bottom sediment. Sediment is not considered as the main contributor to the contamination of fish and invertebrates. It is expected that any reduction of direct inputs of TBT from ship hulls in a near future should result in a rapid reduction of butyltins in the St. Lawrence ecosystem.