Design and evaluation of an atomization-based cutting fluid spray system in turning of titanium alloy

Tool life has been a vital issue in machining titanium alloys. Recently, an atomization-based cutting fluid (ACF) application has been found to be an effective approach for cooling and lubrication in micromachining operations. In this study, an ACF spray system is developed for macro-scale turning of Ti–6Al–4V. The spray system is designed to minimize interaction between the fluid droplets, and the gas nozzle to control the divergence of the fluid droplets. Experiments are conducted to study the effect of five specific ACF spray parameters including fluid flow rate, spray distance, impingement angle, and type and pressure level of the droplet carrier gas on cutting forces, tool life, and chip characteristics. It has been observed that the combination of lower pressure (150 psi) air-mixed CO₂ with a higher flow rate (20 ml/min) and a larger spray distance (35 mm) produces a significantly longer tool life and broken chips. The results also reveal that the ACF spray system can extend tool life up to 40–50% over flood cooling.     

Building regional priorities in forests for development and adaptation to climate change in the Congo Basin

Indentifying common priorities in shared natural resource systems constitutes an important platform for implementing adaptation and a major step in sharing a common responsibility in addressing climate change. Predominated by discourses on REDD + (Reduced Emissions from Deforestation and Forest Degradation and conservation, sustainable management of forests and enhancement of forest carbon stocks in developing countries) with little emphasis on adaptation there is a risk of lack of policy measures in addressing climate change in the Congo Basin. Forest products and ecosystem services provide security portfolios for the predominantly rural communities, and play major roles in national development programmes in both revenue and employment opportunities. Thus, raising the profile of forests in the policy arena especially in the twin roles of addressing climate change in mitigation and adaptation and achieving resilient development is crucial. Within the framework of the Congo Basin Forests and Climate Change Adaptation project (COFCCA) project, science policy dialogue was conducted to identify and prioritize forest based sectors vulnerable to climate change but important to household livelihoods and national development. The goal of the prioritization process was for the development of intervention in forest as measures for climate change adaptation in Central Africa. Participants constituted a wide range of stakeholders (government, Non Governmental Organizations, research institutions, universities, community leaders, private sectors etc.) as representatives from three countries directly involved in the project: Cameroon, Central African Republic and Democratic Republic of Congo. Building on national priorities, four forest related sectors were identified as common priorities at the regional level for focus on climate change adaptation. These sectors included: (1) energy with emphasis on fuel wood and Charcoal; (2) Water principally quality, quantity, accessibility, etc.; (3) Food with emphasis on Non Timber Forest Products, and (4) Health linked to healthcare products (medicinal plants). Using these prioritized sectors, the project focused on addressing the impacts of climate change on local communities and the development of adaptation strategies in the three pilot countries of the Congo Basin region. The four sectors constitute the key for development in the region and equally considered as priority sectors in the poverty reduction papers. Focused research on these sectors can help to inject the role of forests in national and local development and their potentials contributions to climate change adaptation in national and public discourses. Mainstreaming forest for climate change adaptation into national development planning is the key to improve policy coherence and effectiveness in forest management in the region.     

Design and manufacturing of femoral stems for the Indian population

Several researchers have stressed the need for a proper implant-patient match in hip joint replacements, in particular, for cementless femoral stems. Some of the complications of mismatch are aseptic loosening, improper load distribution, and discomfort. In this study, the differences in dimensions between femurs of elderly Indians and those of populations from other regions are compared in order to solve the problem of a possible geometric mismatch between a selected implant and the femurs of an Indian patients are concerned. This paper also describes a methodology for implant designing from measured anthropometric data, fit evaluation, finite element (FE) stress analysis and subsequently implant manufacturing using the CAM (Computer Aided Manufacturing) technique. The machining of the Titanium alloy femoral stem is usually performed on a 5 Axis CNC (Computer Numerical Control) machining center. However, in this study the machining of the femoral stem was effectively performed on a 3 Axis CNC machining center to emphasize on economical benefits for low cost manufacturing strategy.     

Incorporating stakeholder decision support needs into an integrated regional Earth system model

A new modeling effort exploring the opportunities, constraints, and interactions between mitigation and adaptation at regional scale is utilizing stakeholder engagement in an innovative approach to guide model development and demonstration, including uncertainty characterization, to effectively inform regional decision making. This project, the integrated Regional Earth System Model (iRESM), employs structured stakeholder interactions and literature reviews to identify the most relevant adaptation and mitigation alternatives and decision criteria for each regional application of the framework. The information is used to identify important model capabilities and to provide a focus for numerical experiments. This paper presents the stakeholder research results from the first iRESM pilot region. The pilot region includes the Great Lakes Basin in the Midwest portion of the United States as well as other contiguous states. This geographic area (14 states in total) permits cohesive modeling of hydrologic systems while also providing strong gradients in climate, demography, land cover/land use, and energy supply and demand. The results from the stakeholder research indicate that, for this region, iRESM should prioritize addressing adaptation alternatives in the water resources, urban infrastructure, and agriculture sectors, including water conservation, expanded water quality monitoring, altered reservoir releases, lowered water intakes, urban infrastructure upgrades, increased electric power reserves in urban areas, and land use management/crop selection changes. For mitigation in this region, the stakeholder research implies that iRESM should focus on policies affecting the penetration of renewable energy technologies, and the costs and effectiveness of energy efficiency, bioenergy production, wind energy, and carbon capture and sequestration.     

Modeling and interpretation of fiber orientation-based failure mechanisms in machining of carbon fiber-reinforced polymer composites

The development and implementation of a microstructure-based finite element model for the machining of carbon fiber-reinforced polymer composites is presented. A new approach to interfacial modeling is introduced where the material interface is modeled using continuum elements, allowing failure to take place in either tension or compression. The model is capable of describing the fiber failure mode occurring throughout the chip formation process. Characteristic fiber length in the chips, and machining forces for microstructures with fibers orientated at 0°, 45°, 90°, and 135° are examined. For model validation purposes, the model-based machining performance predictions are compared to the machining responses from a set of orthogonal machining experiments. A parametric study is presented that identifies a robust tool geometry, which minimizes the effects of fiber orientation and size on the machining forces.     

Prompting safety-belt use in the context of a belt-use law: the flash-for life revisited

PROBLEM: Safety-belt use reduces motor vehicle crash-related morbidity and mortality, yet an estimated 18% of drivers do not consistently buckle up (NHTSA, 2005). In 1985, Geller and colleagues developed an interpersonal Flash-for-Life prompt that increased belt use among 22% of 1,087 unbuckled drivers (Geller, Bruff, & Nimmer, 1985). METHOD: The Flash-for-Life intervention was re-introduced at a large university with high safety-belt use (i.e., 80%). College students stood at parking-lot entrance/exits and "flashed" signs with the message, "Please Buckle Up, I Care" to unbuckled drivers. RESULTS: Of 427 unbuckled drivers observed, 30% of these complied with the prompt. Male drivers were significantly more likely to comply with prompts delivered by females. DISCUSSION: Compliance was higher than in the 1985 study, indicating a high baseline rate of safety-belt use does not negate potential beneficial influence of a prompting intervention. This intervention is particularly effective with college-aged males, a sub-group of the driving population least likely to buckle-up. IMPACT ON INDUSTRY: A simple behavioral prompt could be used at most industrial complexes to increase safety-belt use among vehicle occupants who are not buckled-up.     

Does safety climate moderate the influence of staffing adequacy and work conditions on nurse injuries?

PROBLEM: Hospital nurses have one of the highest work-related injury rates in the United States. Yet, approaches to improving employee safety have generally focused on attempts to modify individual behavior through enforced compliance with safety rules and mandatory participation in safety training. We examined a theoretical model that investigated the impact on nurse injuries (back injuries and needlesticks) of critical structural variables (staffing adequacy, work engagement, and work conditions) and further tested whether safety climate moderated these effects. METHOD: A longitudinal, non-experimental, organizational study, conducted in 281 medical-surgical units in 143 general acute care hospitals in the United States. RESULTS: Work engagement and work conditions were positively related to safety climate, but not directly to nurse back injuries or needlesticks. Safety climate moderated the relationship between work engagement and needlesticks, while safety climate moderated the effect of work conditions on both needlesticks and back injuries, although in unexpected ways. DISCUSSION AND IMPACT ON INDUSTRY: Our findings suggest that positive work engagement and work conditions contribute to enhanced safety climate and can reduce nurse injuries.     

The theory of planned behavior as mediator of the effect of parental supervision: a study of intentions to violate driving rules in a representative sample of adolescents

INTRODUCTION: The study reported here was designed to test the ability of the theory of planned behavior to mediate the effect of parental supervision on adolescents' intentions to violate driving rules. METHOD: A representative sample of 1,654 adolescents completed questionnaires during individual and anonymous interviews carried out at their schools. RESULTS: Results showed that age, gender, prior risky driving-behavior, and parental supervision significantly predict intentions to violate driving rules. Attitude and the subjective norm partially mediate the effect of age, prior behavior, and parental supervision. Perceived behavioral control does not predict intention and is not predicted by other variables. IMPACT: The results suggest that social cognitive variables partially mediate the effect of parenting practices such as supervision.     

The predictive validity of safety climate

PROBLEM: Safety professionals have increasingly turned their attention to social science for insight into the causation of industrial accidents. One social construct, safety climate, has been examined by several researchers [Cooper, M. D., & Phillips, R. A. (2004). Exploratory analysis of the safety climate and safety behavior relationship. Journal of Safety Research, 35(5), 497-512; Gillen, M., Baltz, D., Gassel, M., Kirsch, L., & Vacarro, D. (2002). Perceived safety climate, job Demands, and coworker support among union and nonunion injured construction workers. Journal of Safety Research, 33(1), 33-51; Neal, A., & Griffin, M. A. (2002). Safety climate and safety behaviour. Australian Journal of Management, 27, 66-76; Zohar, D. (2000). A group-level model of safety climate: Testing the effect of group climate on microaccidents in manufacturing jobs. Journal of Applied Psychology, 85(4), 587-596; Zohar, D., & Luria, G. (2005). A multilevel model of safety climate: Cross-level relationships between organization and group-level climates. Journal of Applied Psychology, 90(4), 616-628] who have documented its importance as a factor explaining the variation of safety-related outcomes (e.g., behavior, accidents). Researchers have developed instruments for measuring safety climate and have established some degree of psychometric reliability and validity. The problem, however, is that predictive validity has not been firmly established, which reduces the credibility of safety climate as a meaningful social construct. The research described in this article addresses this problem and provides additional support for safety climate as a viable construct and as a predictive indicator of safety-related outcomes. METHODS: This study used 292 employees at three locations of a heavy manufacturing organization to complete the 16 item Zohar Safety Climate Questionnaire (ZSCQ) [Zohar, D., & Luria, G. (2005). A multilevel model of safety climate: Cross-level relationships between organization and group-level climates. Journal of Applied Psychology, 90(4), 616-628]. In addition, safety behavior and accident experience data were collected for 5 months following the survey and were statistically analyzed (structural equation modeling, confirmatory factor analysis, exploratory factor analysis, etc.) to identify correlations, associations, internal consistency, and factorial structures. RESULTS: Results revealed that the ZSCQ: (a) was psychometrically reliable and valid, (b) served as an effective predictor of safety-related outcomes (behavior and accident experience), and (c) could be trimmed to an 11 item survey with little loss of explanatory power. IMPACT ON INDUSTRY: Practitioners and researchers can use the ZSCQ with reasonable certainty of the questionnaire's reliability and validity. This provides a solid foundation for the development of meaningful organizational interventions and/or continued research into social factors affecting industrial accident experience.     

A male gift to its partner? Cyanogenic glycosides in the spermatophore of longwing butterflies (<Emphasis Type="Italic">Heliconius</Emphasis>)

Males of several insect species transfer nuptial gifts to females during mating, typically in the form of a protein-rich spermatophore. In chemically defended species, males could potentially enhance such a gift with chemicals that help protect the female, her eggs, or both. This was shown for lepidopteran species that accumulate pyrrolizidine alkaloids. Most Heliconius butterflies are presumably protected from predators by virtue of de novo synthesized and/or sequestered cyanogenic glycosides. Males of Heliconius species are known to transfer nutritional gifts to the females but whether defensive chemicals could also be transferred is not known. To ascertain whether transfer of cyanogens occurs, we dissected freshly mated females from nine different Heliconius species and analyzed spermatophores for cyanogenic glycosides. We found cyanogens in the spermatophores of all nine species. This is the first time cyanogenic glycosides are reported in the spermatophores of arthropods. We discuss the implications of these findings for Heliconius biology and for other cyanogenic insects as well. We suggest that chemically defended species commonly lace their nuptial gifts with defensive chemicals to improve gift quality.