Comparison of three-dimensional fluorescence analysis methods for predicting formation of trihalomethanes and haloacetic acids

This work investigated the application of several fluorescence excitation–emission matrix analysis methods as natural organic matter(NOM) indicators for use in predicting the formation of trihalomethanes(THMs) and haloacetic acids(HAAs). Waters from four different sources(two rivers and two lakes) were subjected to jar testing followed by 24 hr disinfection by-product formation tests using chlorine. NOM was quantified using three common measures: dissolved organic carbon, ultraviolet absorbance at 254 nm, and specific ultraviolet absorbance as well as by principal component analysis, peak picking,and parallel factor analysis of fluorescence spectra. Based on multi-linear modeling of THMs and HAAs, principle component(PC) scores resulted in the lowest mean squared prediction error of cross-folded test sets(THMs: 43.7(μg/L)2, HAAs: 233.3(μg/L)2). Inclusion of principle components representative of protein-like material significantly decreased prediction error for both THMs and HAAs. Parallel factor analysis did not identify a protein-like component and resulted in prediction errors similar to traditional NOM surrogates as well as fluorescence peak picking. These results support the value of fluorescence excitation–emission matrix–principal component analysis as a suitable NOM indicator in predicting the formation of THMs and HAAs for the water sources studied.     

Surface modification of polypropylene non-woven fibers with TiO2 nanoparticles via layer-by-layer self assembly method: Preparation and photocatalytic activity

Polypropylene (PP) meltblown fibers were coated with titanium dioxide (TiO₂) nanoparticles using layer-by-layer (LbL) deposition technique. The fibers were first modified with 3 layers of poly(4-styrenesulfonic acid) (PSS) and poly(diallyl-dimethylammonium chloride) (PDADMAC) to improve the anchoring of the TiO₂ nanoparticle clusters. PDADMAC, which is positively charged, was then used as counter polyelectrolyte in tandem with anionic TiO₂ nanoparticles to construct TiO₂/PDADMAC bilayer in the LbL fashion. The number of deposited TiO₂/PDADMAC layers was varied from 1 to 7 bilayer, and could be used to adjust TiO₂ loading. The LbL technique showed higher TiO₂ loading efficiency than the impregnation approach. The modified fibers were tested for their photocatalytic activity against a model dye, Methylene Blue (MB). Results showed that the TiO₂ modified fibers exhibited excellent photocatalytic activity efficiency similar to that of TiO₂ powder dispersed in solution. The deposition of TiO₂ 3 bilayer on the PP substrate was sufficient to produce nanocomposite fibers that could bleach the MB solution in less than 4 hr. TiO₂-LbL constructions also preserved TiO₂ adhesion on substrate surface after 1 cycle of photocatalytic test. Successive photocatalytic test showed decline in MB reduction rate with loss of TiO₂ particles from the substrate outer surface. However, even in the third cycle, the TiO₂ modified fibers are still moderately effective as it could remove more than 95% of MB after 8 hr of treatment.     

Changes in crested wheatgrass root exudation caused by flood, drought, and nutrient stress

Root exudates can chelate inorganic soil contaminants, change rhizosphere pH, and may increase degradation of organic contaminants by microbial cometabolism. Root-zone stress may increase exudation and enhance phytoremediation. We studied the effects of low K+, high NH4+/NO3- ratio, drought, and flooding on the quantity and composition of exudates. Crested wheatgrass (Agropyron cristatum) was grown in Ottawa sand in sealed, flow-through glass columns under axenic conditions for 70 d. Root exudates were collected and analyzed for total organic carbon (TOC) and organic acid content to compare treatment effects. Plants in the low K+ treatment exuded 60% more TOC per plant per day (p = 0.01) than the unstressed control. Drought stress increased cumulative TOC exuded per gram dry plant by 71% (p = 0.05). The flooded treatment increased TOC exuded per gram dry plant by 45%, although this was not statistically significant based on the two replicate plants in this treatment. Exudation from the high NH4+/NO3- ratio treatment was 10% less than the control. Exudation rates in this study ranged from 8 to 50% of rates in four other published studies. Gas chromatography-mass spectrometry (GC-MS) analysis indicated that malic acid was the predominant organic acid exuded. Fumaric, malonic, succinic, and oxalic acids were also detected in the exudates of all treatments. These results demonstrate that nutrient and water stress have significant effects on the quantity and composition of root exudates. Cultural manipulations to induce stress may change the quantity of root exudates and thus increase the effectiveness of phytoremediation.     

Flow-through rates and evaluation of solids separation of compost filter socks versus silt fence in sediment control applications

Soil loss rates from construction sites can be 1000 times the average of natural soil erosion rates and 20 times that from agricultural lands. Silt fence (SF) is the current industry standard used to control sediment originating from construction activities. Silt fences are designed to act as miniature detention ponds. Research has indicated that SF sediment filtering efficiency is related to its ability to detain and pond water, not necessarily the filtration ability of the fabric. Design capacity and spacing is based on flow-through rate and design height. In addition, increased detention of runoff and pressure from ponding may increase the likelihood of overtopping or failure of SF in field application. Testing was conducted on compost silt socks (SS) and SF to determine sediment filtering efficiency, flow-through rate, ponding depth, overtopping point, design height, and design capacity. Results indicate flow-through rate changes with time, as does ponding depth, due to the accumulation of solids on/in the sediment filters. Changes in depth with time were a linear function of flow rate after 10 min of flow, up to the time the sediment filter is overtopped. Predicting the capacity of SF and SS to handle runoff without the filter being overtopped requires consideration of both runoff rate and length of runoff time. Data show SS half the heights of SF were less likely to overtop than SF when sediment-laden runoff water flow rates are less than 1.03 L(-1) s(-1) m(-1) (5 gpm/ft, gal per minute per lineal foot). Ponded depth behind a 61.0-cm (24 in) SF increased more rapidly than behind a 30.5-cm diam. (12 in) SS, and at the end of the thirty minutes, the depth behind the SF was 75% greater than that behind the SS. Removal of solids by the SF and the SS were not shown to be statistically different. Results were used to create a Microsoft Excel-based interactive design tool to assist engineers and erosion and sediment control planners on how to specify compost SS relative to SF in perimeter sediment control applications.     

Ecotoxic effect of phenanthrene on nitrifying bacteria in soils of different properties

Information on ecotoxicity of organic contaminants, such as polycyclic aromatic hydrocarbons (PAHs), in terrestrial environment is needed for establishing soil quality criteria and for risk assessment purposes. An ecotoxic effect of a model PAH compound (phenanthrene) toward soils microorganisms (nitrifying bacteria) was evaluated in 50 different soils. The soil samples were collected from agricultural land in four regions of Poland with varying levels of industrialization (Slaskie, Dolnoslaskie, Podlaskie, and Lubelskie voievodeships). Soils were characterized for basic physicochemical properties (texture, organic matter content, pH(KCl), total nitrogen content, total sorption capacity) and the content of contaminants including PAHs (73-800 microg kg(-1)), Pb (6-720 mg kg(-1)), and Zn (9-667 mg kg(-1)). Ecotoxicity of phenanthrene (applied at 10, 100, 500, and 1000 mg kg(-1)) to soils microorganisms was evaluated in laboratory studies in control conditions (incubation of soils for 7 d at 20 +/- 2 degrees C). Nitrification potential was used as the ecotoxicity measurements end point. The EC50 values (146-1670 mg kg(-1)) calculated from the square root-X linear regression model differed significantly in various soils, although it was difficult to establish a causative relationship between soil physicochemical characteristic and phenanthrene toxicity. A significant factor in the assessment of soils vulnerability to the effect of phenanthrene was level of soil contamination, particularly with PAHs. Soils with previous contamination were more susceptible (mean EC50, 325 mg kg(-1)) than soils from uncontaminated, rural areas (mean EC50, 603 mg kg(-1)).     

Removal of Cr(VI) from Cr-contaminated groundwater through electrochemical addition of Fe(II)

The conventional chemical reduction-precipitation technique in the removal of Cr(VI) from contaminated groundwater involves a two-step process whereby Cr(VI) is first reduced to Cr(III) at an acidic pH by a reducing agent and in a subsequent step, Cr(III) is precipitated as insoluble hydroxide at an alkaline pH. In a variation of this method, Fe(II) is added electrochemically to the Cr(VI) containing water. From a pure iron electrode, Fe(2+) ions are released into the solution and bring forth the reduction of Cr(VI). At the cathode, H(2)O is reduced whereby the OH(-) ions entering the solution keep the pH of the solution in the alkaline range. This latter fact greatly facilitates simultaneous reduction of Cr(VI) to Cr(III) and co-precipitation of hydroxides of trivalent Cr and Fe. On the basis of a set of experimental data, it is shown that this process is both thermodynamically and kinetically efficient, meaning, with the electrochemical method, rapid and nearly complete removal of Cr(VI) from a groundwater source with both high and low levels of Cr-contamination can be achieved. These factors make the electrochemical process superior to the conventional chemical process in remediation of Cr-contaminated groundwater.     

Wetland management: an analysis of past practice and recent policy changes in Ontario

The Ontario Government has recently released its latest Provincial Policy Statement (PPS), which includes a policy concerning wetland protection. This paper uses interviews with key respondents and the results of three separate case studies that examined the former PPS in order to assess the ability of the new policy to improve wetland conservation efforts in Ontario. The case studies include wetland conservation and urban stormwater management in the City of London for the periods 1978-1999 and 1978-2000, respectively. As well, agricultural drainage that occurred in the Township of Zorra for the period 1978-1997 is used to address this management dimension. While progress is evident, the current policy will be difficult to implement effectively because it inadequately deals with the fundamental aspects of management: fragmented jurisdiction, interagency communication, financial arrangements, enforcement, and promoting informed decision making.     

Reducing the healthcare costs of urban air pollution: the South African experience

Air pollutants often have adverse effects on human health. This paper investigates and ranks a set of policy and technological interventions intended to reduce such health costs in the high population density areas of South Africa. It initially uses a simple benefit-cost rule, later extended to capture sectoral employment impacts. Although the focus of state air quality legislation is on industrial pollutants, the most efficient interventions were found to be at household level. These included such low-cost interventions as training householders to place kindling above rather than below the coal in a fireplace and insulating roofs. The first non-household policies to emerge involved vehicle fuels and technologies. Most proposed industrial interventions failed a simple cost-benefit test. The paper's policy messages are that interventions should begin with households and that further industry controls are not yet justifiable in their present forms as these relate to the health care costs of such interventions.     

Criteria for the Assessment of Sustainable Water Management

Pressure on the world’s water resources is increasing, restraining social and economic development in many countries, and threatening ecological values in others. In order to manage water resources in a more sustainable manner, new planning methodologies/processes for river basin management need to be developed. This study attempts to construct a set of useable normative criteria for the analysis and evaluation of such processes. The criteria were designed as a response to the lack of deductive approaches in the evaluation of methodologies and working procedures used in the context of river basin management, making it possible to highlight their potential for sustainable development. The criteria are based on the twin concepts of participation and integration. These concepts function as well-established dimensions of both sustainable development and sustainable river basin management, and they are of significant methodological relevance. A synthesis of the key aspects connected to the two concepts is undertaken, based on a broad literature review. Focus is laid on how in methodological terms, and in relation to regional water management, to achieve participation and integration in a decision-making or planning process. The criteria are concerned with how knowledge and values are integrated into the planning process and how commitment, legitimacy, or acceptance for the resulting plan is generated.     

Metal/metalloid contamination and isotopic composition of lead in edible mushrooms and forest soils originating from a smelting area

High metal contents in edible mushrooms growing in severely contaminated industrial areas pose an important toxicological risk. In the presented study, trace element (Pb, Cd, Zn, Cu, Ag, As, Se) contents were determined in caps and stipes of three different edible mushroom species (Boletus edulis Bull. Fr., Xerocomus badius Fr. Gilb., Xerocomus chrysenteron Bull. Quél.). Additionally, information about the chemical fractionation of metals in separate soil horizons and Pb isotopic data from soils and fruiting bodies allowed a more detailed insight on the uptake mechanisms of metals by the studied mushroom species. Total metal and metalloid concentrations in the organic soil horizons reached 36234 mg Pb kg(-1); 11.9 mg Cd kg(-1); 519 mg Zn kg(-1); 488 mg Cu kg(-1); 25.1 mg Ag kg(-1); 120 mg As kg(-1) and 5.88 Se mg kg(-1). In order to evaluate the accumulation capacity of the studied species, bioconcentration factors (BCF) were calculated for separate trace elements. For selected metals (Pb, Cd, Zn, Cu), a modified BCF calculation (using EDTA-extractable concentrations of metals in soil) was proposed. High contents of Pb (up to 165 mg kg(-1)) and Cd (up to 55 mg kg(-1)) exceeded all the regulatory limits in all the studied species. This was also the case for Se (up to 57 mg kg(-1)) in B. edulis. Intensive consumption of this species grown in such polluted areas can therefore pose toxicological risks for human health. A novel finding was that X. badius can act as an Ag accumulating species when grown at polluted sites due to the high concentrations of Ag (up to 190 mg kg(-1)) in caps. Pb isotopic data showed that Pb originating from the recent air pollution control residues is present mainly in the exchangeable/acid-extractable fraction of the organic horizons and is taken up by fruiting bodies; especially in the case of B. edulis, where fast Pb accumulation occurs. Due to the high species-dependent variations of metal contents, the studied mushrooms are not suitable as bioindicators of environmental pollution.