The toxicity of phthalocyanines to the aquatic plant Lemna minor (duckweed) - testing of 31 compounds

Phthalocyanines are prospective chemicals that have applications in industry, medicine and biology due especially to their architectural flexibility and production of reactive oxygen species. Although they are used in so many areas of human activities nowadays, there is still little knowledge of their ecotoxicity. Here we present the first observation of their toxic effects on representatives of the aquatic plants Lemna minor. The tested phthalocyanines possess a wide spectrum of phytotoxicity ranging from seldom (>50 mg L⁻¹) to highly toxic 0.11 mg L⁻¹. Moreover, the potential of phthalocyanines to be used as selective cyanocides or herbicides is discussed as well.     

Acute effect of benzo[a]anthracene on the biodegradation of peptone under aerobic conditions

Background

This study investigated the acute effect of benzo[a]anthracene, a significant compound among polycyclic aromatic hydrocarbons, on the biodegradation of a synthetic organic substrate??a peptone/meat extract mixture??under aerobic conditions.

Methods

A laboratory-scale sequencing batch reactor was sustained at steady state at a sludge age of 10?days with substrate feeding. Inhibition tests involved running a series of batch reactors initially seeded with the biomass obtained from the parent reactor. After the biomass seeding, the reactors were started with the peptone mixture and a range of initial benzo[a]anthracene concentrations between 0.5 and 88?mg/L. Experimental profiles of oxygen uptake rates and polyhydroxyalkanoates were evaluated by calibration of a selected model.

Results

Lower doses of benzo[a]anthracene had no effect on process kinetics. The noticeable acute impact was only observed with the addition of 88?mg/L of benzo[a]anthracene, but it was limited with the storage mechanism: the amount of organic substrate diverted to polyhydroxyalkanoates was significantly reduced with a corresponding decrease in the maximum storage rate, k _STO, from 2.7 down to 0.6?day^?1. Similarly, the maximum growth rate from internally stored polyhydroxyalkanoates was lowered from 2.3 to 1.0?day^?1.

Conclusion

Among the mechanisms for direct substrate utilization, only the hydrolysis rate was slightly reduced, but otherwise, the overall COD removal efficiency was not affected.     

Catalytic gasification of tars from a dumping site

The work deals with catalytic gasification, pyrolysis and non-catalytic gasification of tar from an industrial dumping site. All experiments were carried out in a vertical stainless steel gasification reactor at 800 °C. Crushed calcined dolomite was used as the gasification catalyst. Parameters such as addition of water and air, and the influence of the catalyst in regard to the composition of the process gas were investigated. The catalytic gasification experiment in the steady state produced process gas with the composition: 56 % of H₂, 9 % of CO, 11 % of CH₄ and 12 % of CO₂ (mol.%). Concentration of the C₂ fraction was lower than 1 mol.%. Volume flow of air was later changed from 120 to 230 ml min^?1 reducing the amount of hydrogen to 51 mol.% and that of methane to 10 mol.%. Process gas created in a non-catalytic gasification process contained 26–30 mol.% of methane, 13–15 mol.% of carbon monoxide and 15–17 mol.% of the C₂ fraction and lower amounts of hydrogen (20 mol.%) and carbon dioxide (2–3 mol.%). The highest apparent conversion of tar was reached in the catalytic gasification processes. A higher rate of catalyst deactivation can be observed when water or air is not added.     

In vitro activity of antimicrobial agents against Pseudomonas tolaasii,pathogen of cultivated button mushroom

In vitro antibacterial activity tests of seven biofungicides (Ekstrasol, Bisolbisan, Bisolbifit, Serenade, Sonata, Timorex, F-Stop) and two disinfectants (colloidal silver alone and in combination with hydrogen peroxide) against the Pseudomonas tolaasii strain (NS3B6) were carried out by the disc-diffusion, broth microdilution and broth macrodilution method. Biofungicides tested in this study did not exhibit any antimicrobial activity in neither one of the methods used. Disc diffusion method revealed high sensitivity of the tested P. tolaasii strain to Ecocute based on colloidal silver and hydrogen peroxide. Both microdilution and macrodilution methods identified the same MICs and MBCs of Ecocute (0.19 mg/L) for P. tolaasii strain. MICs and MBCs values of silver alone were much higher (10 mg/L) compared to silver in combination with hydrogen peroxide.     

Characterization of PCBs from computers and mobile phones, and the proposal of newly developed materials for substitution of gold, lead and arsenic

In this paper, we have analyzed parts of printed circuit board (PCB) and liquid crystal display (LCD) screens of mobile phones and computers, quantitative and qualitative chemical compositions of individual components, and complete PCBs were determined. Differential thermal analysis (DTA) and differential scanning calorimetry (DSC) methods were used to determine the temperatures of phase transformations, whereas qualitative and quantitative compositions of the samples were determined by X-ray fluorescence spectrometry (XRF), inductively coupled plasma optical emission spectrometry (ICP-OES), and scanning electron microscopy (SEM)-energy dispersive X-ray spectrometry (EDS) analyses. The microstructure of samples was studied by optical microscopy. Based on results of the analysis, a procedure for recycling PCBs is proposed. The emphasis was on the effects that can be achieved in the recycling process by extraction of some parts before the melting process. In addition, newly developed materials can be an adequate substitute for some of the dangerous and harmful materials, such as lead and arsenic are proposed, which is in accordance with the European Union (EU) Restriction of the use of certain hazardous substances (RoHS) directive as well as some alternative materials for use in the electronics industry instead of gold and gold alloys.     

Assessment of ozone variations and meteorological influences in a tourist and health resort area on the island of Mali Lošinj (Croatia)

The purpose of this study was to investigate ozone, variations, and its correlation with meteorological parameters at a remote location on the Mali Lo?inj Island, which has been a tourist and health resort area in the northern Adriatic. The measured data are discussed in relation to the EU guidelines (Directive 2002/3/EC; Directive 2008/50/EC). In order to characterize ambient air with respect to ozone vegetation injury and photochemical pollution, we calculated accumulated dose over a threshold of 40 parts per billion index and two photochemical pollution indicators. The influence of local meteorological parameters on the measured ozone volume fractions was also investigated. We used the multivariate technique principal component analysis to trace correlations between measured ozone concentration and meteorological parameters.     

Toxicity of mancozeb,chlorothalonil, captan,fluopyram, boscalid,and difenoconazole to Didymella applanata isolates from Serbia

Field isolates of Didymella applanata, the causal agent of spur blight of raspberry, were evaluated in vitro for their sensitivity to mancozeb, chlorothalonil, captan, fluopyram, boscalid and difenoconazole. A total of 10 isolates, collected during 2013 at five localities in the major raspberry growing region in Serbia, and characterized as copper hydroxide, dithianon, and tebuconazole (sensitive), pyraclostrobin (sensitive or highly resistant) and fluazinam (sensitive or moderately resistant), were used in this study. The EC₅₀ values for the isolates ranged from 1.33 to 2.88 mg L^?1 for mancozeb, from 3.18 to 6.65 mg L^?1 for chlorothalonil, from 15.75 to 24.69 mg L^?1 for captan and from 1.80 to 8.20 mg L^?1 for fluopyram. The narrowest range of EC₅₀ values was recorded for difenoconazole (0.23–0.49 mg L^?1), whereas the widest range was obtained for boscalid (4.49–49.25 mg L^?1). The calculated resistance factors showed that all D. applanata isolates were sensitive to mancozeb, chlorothalonil, captan, and difenoconazole. Four isolates were moderately resistant to boscalid, while three of them were also moderately resistant to fluopyram. This finding of moderately resistant isolates to these SDHI fungicides indicates a possible cross-resistance which should be clarified in further investigations.     

Kinetics and mechanisms of interaction of simazine with humic acids

Abstract

The adsorption of simazine on two fractions of hu‐mic acids of different molecular size was investigated at a pH range of 2.5 to 6.2. The amounts of the herbicide adsorbed decreased with increasing pH for both of the two humic acids fractions used and no adsorption was observed at pH 5.5. The adsorption capacity of fraction I (M_v >100,000) exceeded that of fraction IV (M_v < 4,000) over the entire pH region used. No appreciable changes in the adsorbed amounts were observed after 24 hours.

Continuous flow dialysis techniques were used to determine the extent of binding between simazine and dissolved humic acids. It was observed that 50% and 60% of simazine added were thus removed from the dialysis bags containing humic acids fractions I and IV,respectively. Higher amounts of simazine were adsorbed by the high molecular weight humic fraction. The adsorption processes involve ionic bonds between simazine and humic acids. In addition it is likely that hydrogen bonds and physical forces are also involved in the adsorption of simazine by humic acids.     

Influence of a nickel smelter plant on the mineralogical composition of attic dust in the Tikveš Valley, Republic of Macedonia

Mineral phases and their content were determined in attic dust samples collected from 27 houses in the Tikve? Valley, Republic of Macedonia. By using quantitative X-ray diffraction, the principal mineral phases were determined to be the serpentinite group (chrysotile, lizardite) and amphibole group of minerals (ribecite, tremolite, actinolite) present in the attic dust samples from this region which are not common constituents of urban dust. Strong correlations existed between these mineral phases in the dust and those in ores processed at a ferronickel smelter plant situated in this region. Spatial distributions of specific mineral phases were made and were consistent with wind directions and predicted deposition (60–70 %) of dust emitted from the metallurgical plant.