Levels of heavy metals in tissues of shingi fish (Heteropneustes fossilis) from Buriganga River, Bangladesh

Heavy metal pollution was reported in commercially valuable freshwater edible fish in the Buriganga River, Bangladesh. The concentrations of As, Pb, Cd, Cr, Zn, and Cu were investigated in the muscle, gill, stomach, intestine, and liver of Heteropneustes fossilis caught at three stations to assess the degree of fish pollution by heavy metals. Significant differences in concentrations of analyzed elements were observed among different tissues, but not among the stations. The ranges of the measured concentrations (μg/g dry weight) in the tissues of H. fossilis were as follows: arsenic concentration was (0.2–0.4), (0.82–0.90), (3.29–3.99), (2.20–2.80), and (2.41–2.90), that of lead was (1.79–2.20), (4.95–6.55), (10.36–13.38), (5.74–9.70), and (18.20–18.79), that of cadmium was (0.3–0.4), (2.87–4.27), (1.03–1.63), (1.55–4.59), and (2.25–5.50), that of chromium was (1.40–1.70), (3.52–3.72), (2.28–5.29), (2.77–3.79), and (4.25–8.65), that of zinc was (24.47–28.82), (16.82–18.80), (20.22–22.20), (22.86–26.68), and (60.82–67.80), and that of copper was (7.80–8.50), (6.22–6.81), (38.21–44.25), (17.07–21.03), and (43.24–47.30) in the muscle, gill, stomach, intestine, and liver, respectively. This research showed that the liver appeared to be the main heavy metal storage tissue, while the muscle had the lowest levels of analyzed metals. The concentrations of metal in the muscles not exceeded the acceptable levels for a food source for human consumption.     

Aliphatic and polycyclic aromatic hydrocarbons in the surface sediments of the Mediterranean: assessment and source recognition of petroleum hydrocarbons

Coastal marine sediment samples were collected from ten sampling stations along the Egyptian Mediterranean coast in April 2010. All sediment samples were analyzed for aliphatic (C7 to C34) and polycyclic aromatic hydrocarbons (PAHs) as well as total organic carbon (TOC) contents and grain size analysis. Total aliphatic hydrocarbons ranged from 1621.82 to 9069.99 ng/g (dry weight), while aromatic hydrocarbons (16 PAHs) varied between 208.69 and 1020.02 ng/g with an average of 530.68?±?225.86 ng/g?dwt. Good correlations observed between certain PAH concentrations allowed to identify its origin. The average TOC percent was varied from 0.13 to 1.46 %. Principal component analysis was used to determine the sources of hydrocarbon pollutants in sediments of Mediterranean. Additionally, special PAHs compound ratios suggest the petrogenic origins.     

An alternative approach for delineating eco-sensitive zones around a wildlife sanctuary applying geospatial techniques

The dynamics, degradation, and conservation of forest ecosystems are matters of prime concerns worldwide at the present. Proper planning and management of a forest area are essentially needed to protect it from the grasp of burgeoning pressure of urban-industrial sprawl. Establishment of eco-sensitive zones (ESZs), which act as buffer areas around the core forests, is one of the key approaches towards achieving this goal. This paper deals with the applicability of geospatial techniques to identify the ESZ around an Indian wildlife sanctuary following the different rules and acts prescribed by the Government of India. Gumti Wildlife Sanctuary, located in the northeastern state of Tripura in India, has been selected here as a case study. Collected pieces of information on the distribution of biodiversity and human population in the area were also used to make the approach more holistic. As inferred from this study, remote sensing and geographical information systems were found to be easily implementable and time as well as cost-effective tools for this purpose with a distinct advantage of spatial as well as temporal accuracy in identifying the existing land use and land cover patterns in pilot assessments. However, the results indicated that only appropriate hybridization of field-based information on the biodiversity and ecological aspects of the forest as well as patterns of human interferences with the remote sensing and GIS-based data could make this approach more relevant in actual implementations.     

An assessment to prioritise the critical erosion-prone sub-watersheds for soil conservation in the Gumti basin of Tripura,North-East India

Erosion-induced land degradation problem has emerged as a serious environmental issue across the world. Assessment of this problem through modelling can generate valuable quantitative information for the planners to identify priority areas for proper soil conservation measures. The Gumti River basin of Tripura falls under humid tropical climate and experiences soil erosion for a prolonged period which has turned into a major environmental issue. Increased sediment supply through top soil erosion is one of the major reasons for reduced navigability of this river. Thus, the present study is an attempt to prioritize the sub-watersheds of the Gumti basin by estimating soil loss through the USLE (Universal Soil Loss Equation) model. For that purpose, five parameters of the USLE model were processed, computed and overlaid in a GIS environment. The result shows that potential mean annual soil loss of the Gumti basin ranges between 0.03 and 114.08 t ha^?1 year^?1. The resultant values of soil loss were classified into five categories considering the minimum and maximum values. It has been identified that low, moderate, high, very high and severe soil loss categories occupy 68.71, 8.94, 5.86, 5.02 and 11.47% of the basin respectively. Moreover, it has been recognised that sub-watersheds like SW7, SW8, SW12, SW21, SW24 and SW29 fall under very high priority class for which mitigation measures are essential. Therefore, the present study recommends mitigation measures through terrace cultivation, as an alternative of shifting cultivation in the hilly areas and through construction of check dams at the appropriate sites of the erosion prone sub-watersheds. Moreover, proper afforestation programmes that have been implemented successfully in other parts of Tripura through the Japan International Cooperation Agency, Joint Forest Management, and National Afforestation Programme should be initiated in the highly erosion-prone areas of the Gumti River basin.     

Analysis of elemental concentration using ICP-AES and pathogen indicator in drinking water of Qasim Abad, District Rawalpindi, Pakistan

The present study was conducted to investigate drinking water quality (groundwater) from water samples taken from Qasim Abad, a locality of approximately 5,000 population, situated between twin cities Rawalpindi and Islamabad in Pakistan. The main sources of drinking water in this area are water bores which are dug upto the depth of 250–280 ft in almost every house. The study consists of the determination of physico-chemical properties, trace metals, heavy metals, rare earth elements and microbiological quality of drinking water. The data showed the variation of the investigated parameters in samples as follows: pH 6.75 to 8.70, electrical conductivity 540 to 855 μS/cm, total dissolved solids 325.46 to 515.23 ppm and dissolved oxygen 1.50 to 5.64 mg/L which are within the WHO guidelines for drinking water quality. The water samples were analysed for 30 elements (aluminium, iron, magnesium, manganese, silicon, zinc, molybdenum, titanium, chromium, nickel, tungsten, silver, arsenic, boron, barium, beryllium, cadmium, cobalt, copper, gallium, mercury, lanthanum, niobium, neodymium, lead, selenium, samarium, tin, vanadium and zirconium) by using inductively coupled plasma atomic emission spectroscopy. The organic contamination was detected in terms of most probable number (MPN) of faecal coliforms. Overall, elemental levels were lower than the recommended values but three water bores (B-1, B-6, B-7) had higher values of iron (1.6, 2.206, 0.65 ppm), two water bores (B-1, B-6) had higher values of aluminium (0.95, 1.92 ppm), respectively, and molybdenum was higher by 0.01 ppm only in one water bore (B-11). The total number of coliforms present in water samples was found to be within the prescribed limit of the WHO except for 5 out of 11 bore water samples (B-2, B-3, B-4, B-8, B-11), which were found in the range 5–35 MPN/100 mL, a consequence of infiltration of contaminated water (sewage) through cross connection, leakage points and back siphoning.     

Assessment of indoor and outdoor particulate air pollution at an urban background site in Iran

The relationship between indoor and outdoor particulate air pollution was investigated at an urban background site on the Payambar Azam Campus of Mazandaran University of Medical Sciences in Sari, Northern Iran. The concentration of particulate matter sized with a diameter less than 1 μm (PM_1.0), 2.5 μm (PM_2.5), and 10 μm (PM₁₀) was evaluated at 5 outdoor and 12 indoor locations. Indoor sites included classrooms, corridors, and office sites in four university buildings. Outdoor PM concentrations were characterized at five locations around the university campus. Indoor and outdoor PM measurements (1-min resolution) were conducted in parallel during weekday mornings and afternoons. No difference found between indoor PM₁₀ (50.1 ± 32.1 μg/m³) and outdoor PM₁₀ concentrations (46.5 ± 26.0 μg/m³), indoor PM_2.5 (22.6 ± 17.4 μg/m³) and outdoor PM_2.5 concentration (22.2 ± 15.4 μg/m³), or indoor PM_1.0 (14.5 ± 13.4 μg/m³) and outdoor mean PM_1.0 concentrations (14.2 ± 12.3 μg/m³). Despite these similar concentrations, no correlations were found between outdoor and indoor PM levels. The present findings are not only of importance for the potential health effects of particulate air pollution on people who spend their daytime over a period of several hours in closed and confined spaces located at a university campus but also can inform regulatory about the improvement of indoor air quality, especially in developing countries.     

POLYNOMIAL-BASED DISAGGREGATION OF HOURLY RAINFALL FOR CONTINUOUS HYDROLOGIC SIMULATION1

Hydrologic modeling of urban watersheds for designs and analyses of stormwater conveyance facilities can be performed in either an event-based or continuous fashion. Continuou simulation requires, among other things, the use of a time series of rainfall amounts. However, for urban drainage basins, which are typically small, the temporal resolution of the rainfall time series must be quite fine, and often on the order of 5 to 15 minutes. This poses a significant challenge because rainfall-gauging records are usually kept only for hourly or longer time steps. The time step sizes in stochastic rainfall generators are usually also too large for application to urban runoff modeling situations. Thus, there is a need for methods by which hourly rainfall amounts can be disaggregated to shorter time intervals. This paper presents and compares a number of approaches to this problem, which are based on the use of polynomial approximating functions. Results of these evaluations indicate that a desegregation method presented by Ormsbee (1989) is a relatively good performer when storm durations are short (2 hours), and that a quadratic spline-based approach is a good choice for longer-duration storms. Based on these results, the Ormsbee technique is recommended because it provides good performance, and can be applied easily to long time series of precipitation records. The quadratic spline-based approach is recommended as a close second choice because it performed the best most consistently, but remains more difficult to apply than the Ormsbee technique. Results of this study also indicate that, on average, all of the disaggregation methods evaluated introduce a severe negative bias into maximum rainfall intensities. This is cause for some well-justified concern, as the characteristics of runoff hydrographs are quite sensitive to maximum storm intensities. Thus, there is a need to continue the search for simple yet effective hourly rainfall disaggregation methods.     

Assessing the genotoxic potentials of arsenic in tilapia (Oreochromis mossambicus) using alkaline comet assay and micronucleus test

This experiment was conducted to study the genotoxic potentials of sodium arsenite (NaAsO₂) in freshwater fish Oreochromis mossambicus by using alkaline comet assay and micronucleus (MN) test. Fish were exposed to three different concentrations (3 ppm, 28 ppm and 56 ppm) of arsenic and gill, liver and blood tissue samples were collected after 48 h, 96 h and 192 h of exposure. Arsenic exposure induced DNA damage in all tissues examined in a concentration dependent manner. A significant (p < 0.05) increase in the comet tail DNA (%) of the exposed fish liver, gill, and blood was observed after 48 h and 96 h of exposure, but a decline in DNA damage was recorded in all the tissues at all the three concentrations studied after 192 h of exposure. Liver tissue exhibited significantly (p < 0.05) higher DNA damage at all the concentrations examined, followed by gill and blood. Higher liver tail DNA (51.38 ± 0.21%) refers that it is more prone to injury to arsenic toxicity than the gill and blood. In blood samples arsenic induced micronucleus formation in a concentration dependent manner and highest (5.8 ± 0.46%) value was recorded in 56 ppm after 96 h of exposure, whereas, it was decreased after 192 h of exposure at all the three concentrations of NaAsO₂ examined which refers to the DNA repairing ability of fish to arsenic toxicity. The results of this study depict the genotoxic potentials of arsenic to fish which in turns provide insight on advanced study in aquatic toxicology.     

Measurement of black carbon (BC) by an optical method and a thermal-optical method: Intercomparison for four sites

Comparison of black carbon (BC) measurements obtained by two methods was performed for aerosols samples collected on Whatman 41 (W-41) filters, using an optical method (Magee Scientific Optical Transmissometer Model OT-21) and a thermal-optical method (Sunset Laboratory Thermal-optical analyzer). Samples were collected from four sites: Albany (a small urban site, NY), Antalya (coastal site, Turkey), Whiteface Mountain (remote site, NY) and Mayville (rural site, NY). At Albany, comparison between the two methods showed excellent agreement; a least-squares regression line yielded a slope of 1.02, and r² = 0.88. Similar comparisons at Antalya (slope of 1.02, r² = 0.5) and Whiteface Mountain (slope of 0.92 and r² = 0.58) also gave very good relationship. At Mayville, the relationship between the two methods yielded somewhat lower regression: a slope of 0.75, and r² = 0.44. The data from the four locations, when plotted together, yielded an excellent agreement: a slope of 0.91, and r² of 0.84. Based on our measurements, it appears that optical measurement using the OT-21 can be successfully applied to determination of BC in W-41 filters. However, because of the variability in the chemical composition of BC aerosol at different locations, it is suggested that the calibration of OT-21 when using W-41 filters should be performed with a statistically significant numbers of samples for specific sites.