Isolation and Characterization of Nanocrystalline Cellulose from Totally Chlorine Free Oil Palm Empty Fruit Bunch Pulp

Nanocrystalline cellulose (NCC) was isolated from a totally chlorine free (TCF) bleached oil palm empty fruit bunch (OPEFB) pulp via acid hydrolysis using a 58 % sulfuric acid concentration and ultrasonic treatment. The effects of acid concentration and hydrolysis time were investigated. Characterization of OPEFB–NCC was carried out using TEM, FTIR, ¹³C-NMR, XRD, zeta potential and TGA. The optimal hydrolysis time was 80 min as indicated by the leveling off of the OPEFB–NCC dimensions (length 150 nm and diameter 6.5 nm) with no significant loss of crystallinity at this point. The presence of a shoulder peak at 1231 cm^?1 (assigned to a sulfate group) in the FTIR spectrum of NCC is indicative of a successful esterification. This is further corroborated by the ¹³C-NMR analysis whereby the distinct C4 amorphous and crystalline peaks present in OPEFB–TCF pulp had almost disappeared and the cluster of signals for C2, C3, C5, and a well separated signal of C6 had merged into one single peak in the OPEFB–NCC sample. These observations allude to most of the amorphous region having been removed and to the strong possibility of sulfonation having not only occurred on the C6, but also on C2 and C3. OPEFB–NCC isolated over shorter hydrolysis time was more thermally stable; however, the char fraction decreases with hydrolysis time despite having a higher zeta potential. The results of this investigation demonstrate that NCC can be produced from pulp made by chlorine free environmentally benign processes with ensuing savings in energy and chemicals.     

Effect of High Content of Deinking Paper Sludge (DPS) on the Reinforcement of HDPE

Deinking paper sludge (DPS)/high density polyethylene (HDPE) composites with and without coupling agent (3 % of maleated polyethylene (MAPE)) were manufactured by twin-screw extrusion followed by injection molding with high percentages of DPS (0, 20, 30 and 40 %). The effects of DPS content and MAPE on the mechanical, thermal, and morphological properties of the DPS/HDPE composites were investigated. Increasing DPS content in composites increased the tensile and flexural modulus (E; MOE), tensile and flexural strength (Rm; MOR), while decreased elongation at break and Un-notched impact resistance due to a poor adhesion between the DPS and HDPE. The addition of DPS also improved the thermal stability and increased the composites crystallinity. High content of DPS (40 %) and 3 % MAPE achieved good interfacial adhesion between fibres of DPS and HDPE. Therefore, an increase is observed for Rm, MOR, ductility, and impact toughness.     

An enhanced compost temperature sampling framework: Case study of a covered aerated static pile

Spatial and temporal temperature variations exist in a compost pile. This study demonstrates that systematic temperature sampling of a compost pile, as is widely done, tends to underestimate these variations, which in turn may lead to false conclusions about the sanitary condition of the final product. To address these variations, a proper scheme of temperature sampling needs to be used. A comparison of the results from 21 temperature data loggers randomly introduced into a compost pile with those from 20 systematically introduced data loggers showed that the mean, maximum and minimum temperatures in both methods were very similar in their magnitudes. Overall, greater temperature variation was captured using the random method. In addition, 95% of the probes introduced systematically had attained thermophilic sanitation conditions (?55 °C for three consecutive days), as compared to 76% from the group that were randomly introduced. Furthermore, it was found that, from a statistical standpoint, readings from at least 47 randomly introduced temperature loggers are necessary to capture the observed temperature variation. Lastly, the turning of the compost pile was found to increase the chance that any random particle would be exposed to the temperature ?55 °C for three consecutive days. One turning was done during the study, and it increased the probability from 76% to nearly 85%. Using the Markov chain model it was calculated that if five turnings had been implemented on the evaluated technology, the likelihood that every particle would experience the required time–temperature condition would be 98%.     

Assessing the genotoxic potentials of arsenic in tilapia (Oreochromis mossambicus) using alkaline comet assay and micronucleus test

This experiment was conducted to study the genotoxic potentials of sodium arsenite (NaAsO₂) in freshwater fish Oreochromis mossambicus by using alkaline comet assay and micronucleus (MN) test. Fish were exposed to three different concentrations (3 ppm, 28 ppm and 56 ppm) of arsenic and gill, liver and blood tissue samples were collected after 48 h, 96 h and 192 h of exposure. Arsenic exposure induced DNA damage in all tissues examined in a concentration dependent manner. A significant (p < 0.05) increase in the comet tail DNA (%) of the exposed fish liver, gill, and blood was observed after 48 h and 96 h of exposure, but a decline in DNA damage was recorded in all the tissues at all the three concentrations studied after 192 h of exposure. Liver tissue exhibited significantly (p < 0.05) higher DNA damage at all the concentrations examined, followed by gill and blood. Higher liver tail DNA (51.38 ± 0.21%) refers that it is more prone to injury to arsenic toxicity than the gill and blood. In blood samples arsenic induced micronucleus formation in a concentration dependent manner and highest (5.8 ± 0.46%) value was recorded in 56 ppm after 96 h of exposure, whereas, it was decreased after 192 h of exposure at all the three concentrations of NaAsO₂ examined which refers to the DNA repairing ability of fish to arsenic toxicity. The results of this study depict the genotoxic potentials of arsenic to fish which in turns provide insight on advanced study in aquatic toxicology.     

An alternative approach for delineating eco-sensitive zones around a wildlife sanctuary applying geospatial techniques

The dynamics, degradation, and conservation of forest ecosystems are matters of prime concerns worldwide at the present. Proper planning and management of a forest area are essentially needed to protect it from the grasp of burgeoning pressure of urban-industrial sprawl. Establishment of eco-sensitive zones (ESZs), which act as buffer areas around the core forests, is one of the key approaches towards achieving this goal. This paper deals with the applicability of geospatial techniques to identify the ESZ around an Indian wildlife sanctuary following the different rules and acts prescribed by the Government of India. Gumti Wildlife Sanctuary, located in the northeastern state of Tripura in India, has been selected here as a case study. Collected pieces of information on the distribution of biodiversity and human population in the area were also used to make the approach more holistic. As inferred from this study, remote sensing and geographical information systems were found to be easily implementable and time as well as cost-effective tools for this purpose with a distinct advantage of spatial as well as temporal accuracy in identifying the existing land use and land cover patterns in pilot assessments. However, the results indicated that only appropriate hybridization of field-based information on the biodiversity and ecological aspects of the forest as well as patterns of human interferences with the remote sensing and GIS-based data could make this approach more relevant in actual implementations.     

Elusive Partnerships: Gas extraction and CSR in Bangladesh

This paper examines Chevron's programme of CSR at a gas field in Bangladesh. Whilst apparently building partnerships in the villages that surround the Bibiyana Gas Field, we suggest that the corporation remains detached from the local population via their community development programmes and employment policies. This contradiction is submerged by ideas and practices within global development discourse which celebrate the disconnection and disengagement of donors via the rhetoric of sustainability. Chiming with development praxis and the neo-liberal values which underscore it by stressing self-reliance, entrepreneurship and ‘helping people to help themselves’, the corporation's Community Engagement Programme does little to meet the demands of local people who hoped for employment and long term investment, a form of connection that is discordant to discourses of self-reliance and sustainability.     

Influence of humic fractions on retention of isoproturon residues in two Moroccan soils

The influence of different fractions of soil organic matter on the retention of the herbicide isoproturon (IPU) has been evaluated. Water and methanol extractable residues of ¹⁴C labeled isoproturon have been determined in two Moroccan soils by β -counting–liquid chromatography. The quantification of bound residues in soil and in different fractions of soil humic substances has been performed using pyrolysis/scintillation-detected gas-chromatography. Microbial mineralization of the herbicide and soil organic matter has been also monitored. Retention of isoproturon residues after 30-days incubation ranged from 22% to 32% (non-extractable fraction). The radioactivity extracted in an aqueous environment was from 20% to 33% of the amount used for the treatment; meanwhile, methanol was able to extract another 48%. Both soils showed quantities of bound residues into the humin fraction higher than humic and fulvic acids. The total amount of residues retained into the organic matter of the soils was about 65 % of non-extractable fraction, and this percentage did not change with incubation time; on the contrary, the sorption rate of the retention reaction is mostly influenced by the clay fraction and organic content of the soil. Only a little part of the herbicide was mineralized during the experimental time.     

Computer Simulation of a Municipal Solid Waste Combustor

A mathematical model has been developed to study the thermal and chemical processes occurring In a municipal solid waste mass combustor. Treating the solids feed as a mixture of pseudo-components, the model determines the Interrelationships between the solids feed rate, grate travel rate and length, amounts and distributions of primary and secondary air, extent of solids burn out, and the bed and flame temperatures. The model Incorporates the kinetics of pyrolysis of solids and simulates heat and mass transfer within the bed.

The temperature and mass flow profiles generated show that much of the grate Is taken up by the heatup and burnout zones. The heatup zone can be reduced by distributing the primary air to maintain minimal air flow In that region, thereby permitting rapid heatup. Increasing the solids feed rate and adjusting the air flow distributions can reduce the length of the burnout zone. The computer program, available on both PCs and mainframe, can be used for different MSW Incinerator dimensions and feed parameters to Investigate the effects of the control variables and optimize the desired output characteristics, e.g., maximize solids throughput.     

Biochemical interaction of six op delayed neurotoxicants with several neurotargets

Abstract

Five organophosphorous insecticides: Leptophos, EPN, Cyano‐fenphos, trichloronate and salithion proved to cause irreversible ataxia not only to chicken but also to mice and sheep. TOCP was included as a reference. Cyanofenphos blocked the catecholamine B‐receptor binding activity with ³H‐norepinephrine at a level similar to that of the specific inhibitor propranolol in the mouse heart preparation. In the lamb heart preparation, the B‐receptor was more sensitive to Leptophos, salithion and TOCP than to propranolol. The six compounds and their oxons were screened for their in‐vitro inhibition to monamine oxidase (MAO), acetyl cholinesterase (AChE) and neurotoxic esterase (NTE) in the brain of either mouse, lamb or chicken. It is believed that their AChE inhibition stands for their acute toxicity, while NTE inhibition is responsible for their paralytic ataxia.     

Nanoscale zero-valent iron/magnetite carbon composites for highly efficient immobilization of U(VI)

Nanoscale zerovalent iron/magnetic carbon (NZVI/MC) composites were successfully synthesized by simply calcining yellow pine and iron precursors. NZVI/MC pyrolyzed at 800°C (NZVI/MC800) had a higher percentage of NZVI and displayed better resistance to aggregation and oxidation of NZVI than samples prepared at other temperatures. The NZVI/MC800 material was applied for the elimination of U(VI) from aqueous solutions. The results suggested that the NZVI/MC800 displayed excellent adsorption capacity (203.94?mg/g) toward U(VI). The significant adsorption capacity and fast adsorption kinetics were attributed to the presence of well-dispersed NZVI, which could quickly reduce U(VI) into U(IV), trapping the guest U(IV) in the porous biocarbon matrix. The removal of U(VI) on the NZVI/MC samples was strongly affected by solution pH. The NZVI/MC samples also displayed outstanding reusability for U(VI) removal after multiple cycles. These findings indicate that NZVI/MC has great potential for remediation of wastewater containing U(VI).